Shuttle XS35GS V2 Owner's Manual

XPC User Guide
For the : XS35GS V2
Shuttle®
XPC Installation Guide
Copyright
©2012 by Shuttle® Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc.
Disclaimer
Shuttle® Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product.
Shuttle® Inc. makes no representation or warranty regarding the contents of this ma­nual. Information in this manual had been carefully checked for accuracy;however, no guarantee is given as to the correctness of the contents. For continuing product improve­ment, Shuttle® Inc. reserves the right to revise the manual or make changes to the speci­fications of this product at any time without notice and obligation to any person or entity regarding such change. The information contained in this manual is provided for general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may cause undesired operation.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel and Pentium are registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM Corporation. AWARD is a registered trademark of Award Software Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice
Other brand and product names used herein are for identification purposes only and may be trademarks of their respective owners.
Safety Information
Read the following precautions before setting up a Shuttle XPC.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent as recommended by Shuttle. Dispose of used batteries according to the manufacturer's instructions.
Laser compliance statement
The optical disc drive in this server is a laser product. The drive's
classication label is lacated on the drive.
CLASS 1 LASER PRODUCT
CAUTION AVOID EXPOSURE TO BEAM.
INVISIBLE LASER RADIATION WHEN OPEN.
:
Installation Notices
Do not place this device underneath heavy loads or in an unstable position.
Do not use or expose this device
around magnetic elds as magnetic
interference may affect the performance of the device.
Do not expose this device to high levels of direct sunlight, high­humidity or wet conditions.
Do not block the air vents tothis device or impede the
airow in any way.
TABLE OF CONTENTS
Driver and Software Installation........................................................1
Motherboard Driver DVD.......................................................1
User Manuals ........................................................................2
BIOS SETUP ....................................................................................3
1.1 About BIOS Setup ...........................................................3
1.1.1 When to Use BIOS Setup ?...................................3
1.1.2 How to Run BIOS Setup ?.....................................3
1.2 BIOS Setup Menu ...........................................................4
1.2.1 Info Menu ..............................................................5
1.2.2 Main Menu.............................................................6
1.2.3 Advanced Menu ....................................................9
1.2.4 Security Menu .....................................................10
1.2.5 Boot Menu ...........................................................12
1.2.6 Exit Menu ............................................................13
Driver and Software Installation
Motherboard Driver DVD
The DVD contents attached in XPC motherboard are subject to change without notice.
The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this XPC in a Windows® OS. Install these drivers after
installing Microsoft® Windows®.
Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun
icon in My Computer to bring up Mainboard Software Setup screen.
Navigation Bar Description :
Auto Install Driver/ Utility.

User Manuals - Motherboard Manual
Link to Shuttle Website - Link to shuttle website homepage.
Browse this DVD - Allows you to see contents of this DVD.
, Quick Guide.
English
1
English
User Manuals
Motherboard Manual
Quick Guide
2
Loading...
+ 12 hidden pages