Shuttle FB51 User Manual

Download

FB51

Pentium 4/Celeron , 478-pin Pr ocessor

Based MAIN BOARD

Shuttle® FB51

Pentium 4/Celeron , 478-pin Processor Based Mainboard Manual Version 1.0

translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without

prior written permission from Shuttle

Shuttle® Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product.

This company makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability; however, no guarantee is given as to the correctness of the contents. In the interest of continued product improvement, this company reserves the right to revise the manual or include changes in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes. The information contained in this manual is provided for general use by the customers.

Inc.

Disclaimer

Trademarks

Shuttle is a registered trademark of Shuttle Inc. Intel, Pentium is a registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM Corporation. AW ARD is a registered trademark of Award Software Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice:

purposes only and may be trademarks of their respective owners.

Other brand and product names used herein are for identification

M649

T ABLE OF CONTENTS

WHAT'S IN THE MANUAL.....................................................................5

Quick Reference................................................................................................5

About This Manual ............................................................................................5

1 INTRODUCTION ................................................................................. 6

1.1 TO DIFFERENT USERS ..............................................................................6

FIRST-TIME DIY SYSTEM BUILDER ............................................................6

EXPERIENCED DIY USER .........................................................................6

SYSTEM INTEGRA TOR ...............................................................................6

1.2 ITEM CHECKLIST........................................................................................7

2 FEATURES .......................................................................................... 8

2.1 SPECIFICATIONS ........................................................................................8

3 HARDWARE INSTALLATION ........................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FB51............................................................................. 11

STEP 1 CPU Installation.........................................................................12

STEP 2 Set Jumpers..............................................................................14

STEP 3 Install DDR SDRAM System Memory ........................................14

STEP 4 Install Internal Peripherals in System Case.................................15

STEP 5 Mount the Mainboard on the Computer Chassis ........................16

STEP 6 Connect Front Panel Switches/LEDs/Speaker/USB ..................17

STEP 7 Connect IDE and Floppy Disk Drives.........................................19

STEP 8 Connect Other Internal Peripherals ............................................19

STEP 9 Connect the Power Supply ........................................................20

STEP 10 Install Add-on Cards in Expansion Slots ..................................20

STEP 1 1 Connect External Peripherals to Back-Panel............................21

STEP 12 First Time System Boot Up......................................................22

STEP 13 Install Drivers & Software Components....................................23

- 1 -

3.2 JUMPER SETTINGS ..................................................................................24

JUMPERS & CONNECTORS GUIDE ....................................................25

Jumpers

Clear CMOS Setting (JP2) ....................................................................28

Back-Panel Connectors

COM1/2 Port Connectors .......................................................................29

VGA Port Connector...............................................................................29

IEEE 1394 Port Connectors ...................................................................29

10/100 base-T LAN Port Connector........................................................29

USB0/1 Port Connectors ........................................................................30

PS/2 Keyboard & PS/2 Mouse Connectors ............................................30

Bass/Center-Out Port Connector ............................................................30

Line-Out (Front-Out) Port Connector .......................................................30

Line-In (Rear-Out) Port Connector...........................................................31

SPDIF_ In Port .......................................................................................31

Front-Panel Connectors

A TX Power On/Off Switch Header (PWON) ............................................32

HDD LED Header (HLED) ....................................................................32

Green LED / Power LED Header (GLED/PLED) ...................................33

Hardware Reset Header (RST)..............................................................33

Extended USB Headers (JP6/JP7).........................................................34

Front-Panel 1394 Header (JP3)..............................................................34

SPDIF_Out Headers (JP10)..................................................................35

Front-Panel Microphone and Line_out Header (JP1 1) ............................35

Internal Peripherals Connectors

Enhanced IDE and Floppy Connector.....................................................36

Other Connectors

A TX Power Supply Connector (CN6 and CN7) .......................................37

- 2 -

CPU and System Fan Connector (F AN1/2/3)..........................................38

Audio CD_IN Connector (CN5) (Black)...................................................38

Wireless Keyboard and Mouse Headers (JP5)......................................38

Parallel Port Header (JP9)......................................................................39

IR Header (JP8)......................................................................................39

3.3 SYSTEM MEMORY CONFIGURATION ......................................................40

INST ALL MEMORY ................................................................................40

UPGRADE MEMORY.............................................................................40

4 SOFTWARE UTILITY ....................................................................... 41

4.1 Mainboard CD Overview ..........................................................................41

4.2 Install Mainboard Software ......................................................................42

4.2.A Install Intel Chipset Driver ....................................................................43

4.2.B Install IDE Driver ...................................................................................44

4.2.C Install VGA Driver ..................................................................................45

4.2.D Install Audio Driver ...............................................................................46

4.2.E Install USB2.0 Driver .............................................................................47

4.2.F Install LAN Driver...................................................................................48

4.3 View the User's Manual............................................................................52

5 BIOS SETUP.....................................................................................5 3

5.1 ENTER BIOS ..............................................................................................53

5.2 THE MAIN MENU .......................................................................................54

ST ANDARD CMOS FEATURES ................................................................56

ADVANCED BIOS FEATURES..................................................................59

ADVANCED CHIPSET FEATURES ...........................................................62

INTEGRATED PERIPHERALS...................................................................65

POWER MANAGEMENT SETUP ..............................................................69

PNP/PCI CONFIGURA TIONS .....................................................................72

- 3 -

PC HEALTH STA TUS.................................................................................74

FREQUENCY/VOL TAGE CONTROL..........................................................76

LOAD FAIL-SAFE DEFAULTS...................................................................77

LOAD OPTIMIZED DEFA UL TS ..................................................................77

SET PASSWORD ......................................................................................78

SAVE & EXIT SETUP.................................................................................79

EXIT WITHOUT SA VING .............................................................................79

- 4 -

WHAT'S IN THE MANUAL

Quick Reference

Hardware Installation >> Step-by-Step ................................................ Page 11

Jumper Settings >> A Closer Look ...................................................... Page 24

Drivers/Software Utilities >> How to Install ......................................... Page 41

BIOS Setup >> How to Configure ........................................................ Page 53

About This Manual

For First-Time DIY System Builder......................................................... Page 6

For Experienced DIY User ...................................................................... Page 6

For System Integrator ............................................................................. Page 6

- 5 -

1 INTRODUCTION

1.1 To Different Users

First-Time DIY System Builder

Welcome to the DIY world! Building your own computer system is not as difficult as you may think. To make your first computer DIY experience successful, right from the start, we have designed the in a step-by-step fashion for all the first-time DIY system builders. Prior to installation, we also suggest you to read the whole manual carefully to gain a complete understanding of your new Shuttle FB51 mainboard.

Experienced DIY User

Congratulate on your purchase of the Shuttle FB51 mainboard. You will find that installing your new Shuttle FB51 mainboard is just easy. Bundled with an array of onboard functions, the highly-integrated FB51 mainboard provides you with a total solution to build the most stable and reliable system. Refer to sections find out how to get the best out of your new mainboard. SetupSetup

Setup also contains the relevant information on how to tune up your system to

SetupSetup achieve higher performance.

3.2 Jumper Settings3.2 Jumper Settings

3.2 Jumper Settings and

3.2 Jumper Settings3.2 Jumper Settings

3.1 Hardware Installation 3.1 Hardware Installation

3.1 Hardware Installation section

3.1 Hardware Installation 3.1 Hardware Installation

Chapter 4 Drivers/Software UtilitiesChapter 4 Drivers/Software Utilities

Chapter 4 Drivers/Software Utilities to

Chapter 4 Drivers/Software UtilitiesChapter 4 Drivers/Software Utilities

Chapter 5 BIOSChapter 5 BIOS

Chapter 5 BIOS

Chapter 5 BIOSChapter 5 BIOS

System Integrator

You have wisely chosen Shuttle FB51 to construct your system. Shuttle FB51 incorporates all the state-of-the-art technology of the Intel845GE chipset from Intel. It integrates the most advanced functions you can find to date in a compact Flex ATX board.

- 6 -

1.2 Item Checklist

ATXPW

ATX12V

Check all items with your FB51 mainboard to make sure nothing is missing. The complete package should include:

 One piece of Shuttle FB51 Mainboard

 One piece of ATA

 One piece of Floppy Ribbon Cable

100/66100/66

100/66 Ribbon Cable

100/66100/66

ICS

9 3

A G P

JP 1 0

SPDIF

IN Q

T D

E 4

610

R 0

JP2

JP12

IDE2

IDE1

ALC650

25193Q1 225

L in

JP5

eou t/M

CD-ICN5

I C

1394

PCI1

JP3

RTL 8100B

FAN3

JP6

USB

JP7

SECRET

L 22

8280

IZ 4

1DB

JP9

FAN1

0212CD TA

12G 002

Vt630

c A 2

800

M F0

JP8

-9 6

-4

C-

-A

EH 1

FA N 2

CN6

D I MM 1

D IM M 2

 One piece of twin ports USB Cable

(optional)(optional)

(optional)

(optional)(optional)

 FB51 User's Manual

 One piece of Bundled CD-ROM with containing:

Ø FB51 user's manual saved in PDF format Ø Intel Chipset driver Ø Intel Ultra ATA driver Ø Intel VGA driver Ø Realtek Audio driver Ø Install USB2.0 driver Ø Realtek LAN driver Ø Award Flashing Utility

- 7 -

2 FEA TURES

FB51 mainboard is carefully designed for the demanding PC user who wants high performance and maximum intelligent features in a compact package.

2.1 Specifications



 CPU Support



Intel Pentium 4/Celeron, 478-pin processors with 400/533 MHz FSB.



 Chipset



Features Intel Brookdale-GE GMCH N.B. and ICH4 S.B.. Onboard LanOnboard Lan

Onboard Lan

Onboard LanOnboard Lan Realtek 8100B, support 10Mbps and 100Mbps operation. Onboard 1394aOnboard 1394a

Onboard 1394a

Onboard 1394aOnboard 1394a VIA VT6306, support 400Mb/s, 200Mb/s, or100Mbits/s data transfer rate.



 Jumperless CPU Configuration



Soft-configuration FSB (The FSB speed is software configurable from 100MHz to 166MHz in the Frequency/Voltage Control of BIOS setup program.)



 On Board 5.1 Channel AC97 Audio



Compliant with AC'97 2.2 specifications.

5.1 channel slot selectable DAC Output for multi-channel applications.



 Versatile Memory Support



184-pin184-pin

Two

184-pin DIMM slots to support up to 2GB of PC1600, PC2100 or

184-pin184-pin

PC2700 compliant DDR SDRAM module.



 AGP Expansion Slot



Provides one 32-bit AGP slot which support 1X/2X/4X AGP device.



 PCI Expansion Slots



Provides one 32-bit PCI slot.



 6 USB 2.0/1.1 Complaint Interface Onboard



Ø 2 x USB 2.0 connectors on back-panel and two sets of dual USB ports

headers on mid-board.

- 8 -



 I/O Interface



Provides a variety of I/O interfaces: Ø 1 x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB

format or for 5.25-inch FDD with 360K or 1.2MB format.

Ø 2 x DB9 Serial connectors 16550 UART compatible. Ø 1 x VGA connector. Ø 1 x SPDIF-In port. Ø 2 x USB2.0 ports. Ø 2 x IEEE1394a connectors. Ø 1 x RJ45 LAN connector. Ø 1 x PS/2 mouse connector. Ø 1 x PS/2 Keyboard connector. Ø 1 x Line-Out (Front-Out) port. Ø 1 x Rear-Out port. Ø 1 x Bass/Center-Out port.



 PCI Bus Master IDE Controller Onboard



Two Ultra DMA to a maximum of four IDE devices (one Master and one Slave per channel). The IDE Bus implements data transfer speeds of up to also supports Enhanced PIO Modes.

80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CDROM, CD-R, CD-RW, and LS-120 Supports.



 ATX Power Supply Connector



ATX power supply unit can connect to the onboard 20-pin Pentium 4 standard ATX power connectors, supporting Suspend and Soft-On/Off by dualfunction power button.

The Pentium 4 ATX power include other 4-pin +12V ATX power connector.



 Advanced Configuration and Power Interface



Features four power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), and S5 (Soft-Off). ACPI provides more efficient Energy Saving Features controlled by your operating system that supports OS Direct Power Management (OSPM) functionality.

133/100133/100

133/100 Bus Master Dual-channel IDE ports provide support

133/100133/100

133/100 133/100

133/100 MB/sec and

133/100 133/100

- 9 -



 System BIOS



Provides licensed Award BIOS V6.0 PG on 2Mb Flash core and supports Green PC, Desktop Management Interface (DMI).



 Form Factor



System board conforms to Shuttle from factor ATX specification. Board dimension: 254mm x 185mm.



 Advanced Features



Low EMI -Low EMI -

Low EMI - Built in spread spectrum and automatic clock shut-off of

Low EMI -Low EMI unused PCI/SDRAMS slots to reduce EMI.

Dual Function Power Button - Dual Function Power Button -

Dual Function Power Button - The system can be in one of two states,

Dual Function Power Button - Dual Function Power Button one is Suspend mode and the other is Soft-Off mode. Pushing the power button for less than 4 seconds places the system into Suspend mode. When the power button is pressed for longer than 4 seconds, the system enters Soft-Off mode.

Modem Ring Power-On - Modem Ring Power-On -

Modem Ring Power-On - The system can be powered on automatically

Modem Ring Power-On - Modem Ring Power-On by the activation of modem ringing.



 Intelligent Features



Voltage Monitoring -Voltage Monitoring -

Voltage Monitoring - Monitors various voltages of key elements, such

Voltage Monitoring -Voltage Monitoring as the CPU, and other critical system voltage levels to ensure stable current passing through mainboard components.

Fan Status MonitoringFan Status Monitoring

Fan Status Monitoring

Fan Status MonitoringFan Status Monitoring is monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is required.)

Temperature Monitoring -Temperature Monitoring -

Temperature Monitoring - This item allows users to make sure whether

Temperature Monitoring -Temperature Monitoring the CPU or system runs in a suitable temperature.

CPU Fan AutoGuardian -CPU Fan AutoGuardian -

CPU Fan AutoGuardian - This SMART Bios enabled 3 phase Variable

CPU Fan AutoGuardian -CPU Fan AutoGuardian Fan Speed and CPU temperature Control feature.

- To prevent CPU from overheating, the CPU fan

- 10 -

3 HARDWARE INSTALLA TION

ATXPW

ATX12V

Before removing or installing any of these devices including CPU, DIMMs,Before removing or installing any of these devices including CPU, DIMMs,

Before removing or installing any of these devices including CPU, DIMMs,

Before removing or installing any of these devices including CPU, DIMMs,Before removing or installing any of these devices including CPU, DIMMs, Add-On Cards, Cables, please make sure to unplug the onboard powerAdd-On Cards, Cables, please make sure to unplug the onboard power

Add-On Cards, Cables, please make sure to unplug the onboard power

Add-On Cards, Cables, please make sure to unplug the onboard powerAdd-On Cards, Cables, please make sure to unplug the onboard power connector.connector.

connector.

connector.connector.

This section outlines how to install and configure your mainboard. Refer to the following mainboard layout to help you to identify various jumpers, connectors, slots, and ports. Then follow these steps designed to guide you through a quick and correct installation of your system.

3.1 Step-by-Step Installation

Accessories Of FB51

IEEE1394 Connectors LA N & U S B 2 .0 C o nnec tors Wireless KB and MS -

Header

JP5

PS/2 Keyboard/Mo use Conne ctors CD_IN-CN5

5. 1 Channel Audio Connec tors Line-out/MIC Header

Audio Cotroller (Realtek ALC650)

I EEE1394 Header -

JP3

9520

04AF

0203 UW

230040A

One PCI Slot FAN3

SPDIF_Out s

JP 10

He ader

JP 10

SPDI

One AGP Slots

SOCKET 478

Extended USB 2.0 He ad er s

- JP 6/JP7

Intel 82801DB Chipset

Clear CMOS Front- Pa ne l He ad ers

JP12

JP2

JP12

IDE2

COM2 Connectors

SPDI F -in Connec tor Parallel Header COM1 & VGA Connector

ALC650

25193 Q 1

Line -o ut /M

1394

PCI1

FA N 3

AG P

JP6

82801DB

Z22

6 KO

6104

REA

JP5

CD-ICN5

JP3

USB

JP7

R TL 8100B

12G 002800

JP9

FA N 1

0212C

V t630 6

D TAI W

A N

c A

M F

ga 87-96

010

33-4C

-N

17-A

S4E

t9 241

FAN 2

FDD

JP8

49L

F0 02A

DIM M

1 D

IMM 2

1 N A

2 N

r ecto

n on

py C p

lo F

ne O

6 N

r ecto

n on

r C e

w o

P 2V

1 +

X T A

8 P J

ad e

H IR

ckets o

S M

IM D M

A R D

-S R D

D in

-p 84

o 1 w

IDE1

Two IDE Connectors

- 11 -

A TX Power Connect o rIn tel 845 GE Chipse t

CN7

Step 1

CPU Installation:

This mainboard supports Intel Pentium 4/Celeron, Socket 478 series CPU. Please follow the step as below to finish CPU installation.

Be careful of CPU orientation when you plug it into CPU socket.

1. Pull up the CPU socket lever and up to 90-degree angle.

CPU socket lever up to 90 degree

2. Locate Pin 1 in the socket and look for a black dot or cut edge on the CPU upper interface. Match Pin 1 and cut edge, then insert the CPU into the socket.

CPU pin 1 and cut edge

- 12 -

3. Press down the CPU socket lever and finish CPU installation.

Note: Note:

Note: If you do not match the CPU socket Pin 1 and CPU cut edge

Note: Note:

well, it may damage the CPU.

4. The Intel Pentium 4/Celeron processor requires a set of heatsink/fan to en sure proper cooling of the processor. If heatsink/fan have not been already bundled with your CPU, you must purchase the heatsink/fan separately and have it installed. Plug the cable through the heatsink/fan in the CPU fan power connector located nearby. Note that there are several types of CPU fan connectors. Normally, if your mainboard supports the hard ware moni toring function, a 3-pin fan power connector should allow your system to detect the CPU fan's speed. The CPU fan can also run with a 2-pin fan power connector, however, detection of CPU fan's speed is not supported. Another type of CPU fan may feature a large 4-pin fan power connector, which does not support CPU fan's speed detection and must be directly connected to the system's power supply unit.

- 13 -

Step 2.

Set Jumpers

This mainboard is jumperless! The default jumper settings have been set for the common usage standard of this mainboard. Therefore, you do not need to reset the jumpers unless you require special adjustments as any of the following cases:

1. Clear CMOS

For first-time DIY system builders, we recommend that you do not change the default jumper settings if you are not totally familiar with the mainboard configuration procedures. The factory-set default settings are tuned for optimum system performance. For the advanced users who wish to customize their system, section information on how to configure your mainboard manually.

3.2 Jumper Settings3.2 Jumper Settings

3.2 Jumper Settings will provide detailed

3.2 Jumper Settings3.2 Jumper Settings

Step 3

Install DDR SDRAM System Memory

To install memory, insert DDR SDRAM memory module(s) in DIMM slot(s). Note that DDR SDRAM modules are directional and will not go in the DIMM slots unless properly oriented. After the module is fully inserted into the DIMM slots, lift the clips of both sides of the DIMM slot to lock the module in place.

DDR SDRAM

- 14 -

Step 4

Install Internal Peripherals in System Case

Before you install and connect the mainboard into your system case, we recommend that you first assemble all the internal peripheral devices into the computer housing, including but not limited to the hard disk drive (IDE/ HDD), floppy disk drive (FDD), CD-ROM drive, and ATX power supply unit. This will greatly facilitate in making the connections to the mainboard described below.

To install IDE & FDD drives, follow this procedure:

1. Set the required jumpers on each device according to the instructions provided by the manufacturer. (IDE devices, HDD, and CD-ROM, have to set jumpers to Master or Slave mode depending on whether you install more than one device of each kind.)

2. Connect IDE cable and FDD cable on the back-panel of the internal peripheral devices to the corresponding headers on board. Note that the

cable should be oriented with its colored stripe (usually red or magenta) connected to pin#1 both on the mainboard IDE or FDD connector and on the device as well.

3. Connect an available power cable from your system power supply unit to the back-panel of each peripheral device. Note that the power cable is

directional and cannot fit in if not properly positioned.

- 15 -

Step 5

Mount the Mainboard on the Computer Chassis

1. You may find that there are a lot of different mounting hole positions both on your computer chassis and on the mainboard. To choose correct mounting holes, the key point is to keep the back-panel of the mainboard in a close fit with your system case, as shown below.

2. After deciding on the proper mounting holes, position the studs between the frame of the chassis and the mainboard. The studs are used to fix the mainboard and to keep a certain distance between the system's chassis and the mainboard, in order to avoid any electrical shorts between the board and the metal frame of the chassis. (If your computer case is already equipped with mounting studs, you will need to tighten screws to attach the mainboard.)

Note:Note:

Note: In most computer housings, you will be able to find 4 or more

Note:Note:

attachment points to install mounting studs and then fix the mainboard. If there aren't enough matching holes, then make sure to install at least 4 mounting studs to ensure proper attachment of the mainboard.

- 16 -

Step 6

Front Panel

- +

Connect Front Panel Switches/LEDs/Speaker/USB

You can find there are several different cables already existing in the system case and originatinting from the computer's front-panel devices (HDD LED, Power LED, Reset Switch, or USB devices etc.) These cables serve to connect the front-panel switches, LEDs, and USB connectors to the mainboard's front-panel connectors group (JP6, JP7, JP12), as shown below.

USB

JP6

JP7

1. ATX Soft Power On/Off (PWON)

2. HDD-LED (HLED)

3. Green-LED and Power-LED (GLED/PLED)

4. Hardware Reset Switch Button (RST)

5. Extended USB Header

USB port 2

PW ON

+ -

GLED

- +

PLED

RST

HLED

N/A

GND

USBD1+

USBD1-

+5V

KEY GND USBD0+ USBD0+5V

W O N

LED /P

LE D

USB port 3

+5V

USBD0-

USBD0+

GND

KEY

Front P anel

- +

JP12

RST HLED

+5V USBD1USBD1+ GND N/A

- 17 -

6. IEEE 1394a header (JP3)

JP3

7. SPDIF_Out header (JP10)

8. CD-IN (CN5), Microphone and Line-Out/MIC (JP11) Headers

Line-Out/MIC

JP11

Front P anel

JP12

CD-IN

CN5

- 18 -

Step 7

Connect IDE and Floppy Disk Drives

1. IDE cable connector

IDE 2

IDE 1

2. Floppy cable connector

Step 8

Connect Other Internal Peripherals

1. IR Headers (JP8)

2. Wireless keyboard and mouse headers (JP5)

FD D

IR Head

JP8

Wireless KB/MS

- 19 -

JP5

Step 9

Connect the Power Supply

1. System power connector(CN7/CN6)

ATX12V 1

CN6

Step 10

Install Add-on Cards in Expansion Slots

1. Accelerated Graphics Port (AGP) Card

CN7

ATXPWR

2. PCI Card

- 20 -

Step 11

Connect External Peripherals to Back-Panel

You are now ready to put the computer case back together and get on to the external peripherals connections to your system's back-panel.

1. COM1 Port

2. COM2 Port

3. VGA Port

4. SPDIF In Port

5. 1394 Ports

6. LAN Port

7. USB0/1 Ports

8. PS/2 Mouse

9. PS/2 Keyboard

10. Audio Line-Out (Front-Out) Port

11. Audio Line-In (Rear-Out) Port

12. Audio Bass/Center-Out Port

3 75

618

910

1112

- 21 -

Step 12

First Time System Boot Up

To assure the completeness and correctness of your system installation, you may check the above installation steps once again before you boot up your system for the first time.

1. Insert a bootable system floppy disk (DOS 6.2x, Windows 95/98/NT, or others) which contains FDISK and FORMAT utilities into the FDD.

2. Turn on the system power.

3. First, you must use the FDISK utility to create a primary partition of the hard disk. You can also add an extended partition if your primary

partition does not use all of the available hard disk space. If you choose to add an extended partition, you will have to create one or more logical partitions to occupy all the space available to the extended partition. The FDISK utility will assign a drive letter (i.e., C:, D:, E:,...) to each partition which will be shown in the FDISK program. After FDISK procedure, reboot your system by using the same system floppy disk.

Note:Note:

Note: DOS 6.2x and Windows 95A can only support up to 2.1GB of

Note:Note:

HDD partition. If you use the FDISK utility with one of the operating systems mentioned above, you can only install your HDD into partitions no larger than 2.1GB each.

4. Now, use the FORMAT utility to format all the partitions you've created.

When formatting the primary partition (C:), make sure to use the FORMAT C: /S command.

Note:Note:

Note: FORMAT C: /S can transfer all the necessary system files into the

Note:Note:

primary partition of your hard disk. Then, your HDD will become

a bootable drive.

5. Install all the necessary drivers for CD-ROM, Mouse, etc.

6. Setup the complete operating system according to your OS installation

guide.

- 22 -

Step 13

Install Drivers & Software Components

Please note that all the system utilities and drivers are designed for Win 9x/ 2000/ME/XP/NT operating systems only. Make sure your operating system is already installed before running the drivers installation CD-ROM programs.

1. Insert the FB51 bundled CD-ROM into your CD-ROM drive. The

autorun program will display the drivers main installation window on screen.

2. Choose "Install Intel Chipset Driver" and complete it.

3. Choose "Install Intel Ultra ATA Driver" and complete it.

4. Choose "Install VGA Device Driver" and complete it.

5. Choose "Install Audio Driver" and complete it.

6. Choose "Install USB2.0 Driver" and complete it.

7. Choose "Install LAN Driver" and complete it.

8. Exit from the autorun drivers installation program.

] Please refer to section

Chapter 4 Software UtilityChapter 4 Software Utility

Chapter 4 Software Utility to install driver.

Chapter 4 Software UtilityChapter 4 Software Utility

- 23 -

3.2 Jumper Settings

Several hardware settings are made through the use of mini jumpers to connect jumper pins on the mainboard. Pin #1 could be located at any corner of each jumper, you just find the location with a white right angle which stands for pin 1#. There are several types of pin 1# shown as below:

3-pin and multi (>3) pin jumpers shown as following: Pin #1 to the left:

Pin #1 on the top:

Pin #1 to the right:

Pin #1 on the bottom:

Jumpers with two pins are shown as for Close [On] or for Open [Off]. To Short jumper pins, simply place a plastic mini jumpers over the desired pair of pins.

Caution!Caution!

Caution!

Caution!Caution!

1. Do not remove the mainboard from its antistatic protective packaging

until you are ready to install it.

2. Carefully hold the mainboard by its edges and avoid touching its

components. When putting the mainboard down, place it on top of its

original packaging film, on an even surface, and components side up.

3. Wear an antistatic wrist strap or take other suitable measures to prevent

electrostatic discharge (ESD) whenever handling this equipment.

- 24 -

Jumpers & Connectors Guide

Use the mainboard layout on page 11 to locate CPU socket, memory banks, expansion slots, jumpers and connectors on the mainboard during the installation. The following list will help you to identify jumpers, slots, and connectors along with their assigned functions:

E5 C8

C6 E4

C1~C4

B8~B10

B1~B2

B11B4~B6

E8 E2

D2~D3

CPU/Memory/Expansion Slots

Socket478 : CPU Socket for Pentium 4/Celeron processors DIMM1/2 : Two184-pin DIMM Slots for 64, 128, 256, 512 MB,

and 1GB of 2.5V DDR SDRAM

(The total installed memory does not exceed 2GB) AGP : One AGP 1X/2X/4X Slot PCI : One 32-bit PCI Expansion Slot

- 25 -

Jumpers

JP2 : Clear CMOS setting

Back Panel Connectors

COM1/2 : Serial port 1/2 (DB9 male)

B2B1

B3 B4 B5 B6 B7

VGA : VGA port (DB15 female) 1394 : 2 x 1394 (0/1) Ports

LAN : 10/100 base-T LAN Port USB : 2 USB 2.0/1.1 (0/1) (Universal Serial Bus) ports MS : PS/2 mouse port KB : PS/2 keyboard port

B8 B9

B10 B11

BASS/CENTER : Audio Bass/Center-Out Port LINE-OUT : Audio Line-Out Port LINE-IN : Line-In Port SPDIF_In : SPDIF In Port

Front Panel Connectors

C1 C2 C3

PWON : ATX power on/off momentary type switch HLED : IDE drive active LED GLED/PLED : Green LED (ON when system stays in power saving

mode) / System power LED

C4 C5

C6 C7 C8

RS T : Hardware reset switch JP6/JP7 : Extended USB Header JP3 : Front Panel IEEE1394 header JP10 : SPDIF_Out header JP11 : Front-Panel Microphone and Line-Out Connector

Internal Peripherals Connectors

D1 D2

FDD : Floppy disk drive interface IDE1 : IDE primary interface (Dual-channel) IDE2 : IDE secondary interface (Dual-channel)

Other Connectors

CN6/CN7 : ATX power connectors

- 26 -

E2 E3

E4 E5 E6

E7 E8

FAN1 : System fan connector FAN2 : Chipset fan connector FAN3 : CPU fan connector CN5 : Audio CD_IN connector JP5 : Wireless Keyboard and Mouse connector JP9 : Parallel port JP8 : IR Header

- 27 -

Jumpers

Clear CMOS Setting (JP2)

JP2 is used to clear CMOS data. Clearing CMOS will result in the permanently erasing previous system configuration settings and the restoring original (factory-set) system settings.

Pin 1-2 (Default)

Pin 2-3 (Clear CMOS)

Clear CMO S

JP2

Step 1.Step 1.

Step 1. Turn off the system power (PC-> Off).

Step 1.Step 1. Step 2.Step 2.

Step 2. Remove ATX Power cable from ATX Power connector.

Step 2.Step 2. Step 3.Step 3.

Step 3. Remove jumper cap from JP2 pins 1-2.

Step 3.Step 3. Step 4.Step 4.

Step 4. Place the jumper cap on JP2 pin 2-3 for a few seconds.

Step 4.Step 4. Step 5.Step 5.

Step 5. Return the jumper cap to pin 1-2.

Step 5.Step 5. Step 6.Step 6.

Step 6. Plug ATX Power cable into ATX Power connector.

Step 6.Step 6. Step 7.Step 7.

Step 7. Turn on the system power (PC-> On).

Step 7.Step 7.

- 28 -

Back-Panel Connectors

COM1/2 Port Connectors

This mainboard can accommodate two serial device on COM1/2. Attach a serial device cable to the DB9 serial port COM1/2 at the backpanel of your computer.

VGA Connector

One 15-pin VGA connector is located at the rear panel of the mainboard.

COM1 Port COM2 Port

VGA Port

IEEE 1394 Port Connectors

This mainboard offers two 1394 ports on back-panel. Plug each device jack into an available 1394 connector.

10/100 base-T LAN Port Connector

This mainboard can accommodate one device on LAN. Attach a CAT-5 cable to the LAN port at the back-panel of your computer.

- 29 -

IEEE1394 Port 1IEEE1394 Port 0

LAN Port

USB Port 0/1 Connectors

Two female connectors USB0/USB1 share the same USB (Universal Serial Bus) bracket at the rear panel of your mainboard. Plug each USB device jack into an available USB0/USB1 connector.

PS/2 Keyboard & PS/2 Mouse Connectors

Two 6-pin female PS/2 keyboard & Mouse connectors are located at the rear panel of the mainboard. Depending on the computer housing you use (desktop or tower), the PS/2 Mouse connector is situated at the top of the PS/2 Keyboard connector when the mainboard is laid into a desktop, as opposed to a tower where the PS/2 Mouse connector is located at the right of the PS/2 Keyboard's. Plug the PS/2 keyboard and mouse jacks into their corresponding connectors.

USB Port 1

USB Port 0

PS/2 Mouse

PS/2 keyboard

Bass/Center-Out Port Connector

Bass/Center-Out is a stereo output port through which the combined signal of all internal and external audio sources on the board is output. It can be connected to 1/8-inch TRS stereo headphones or to bass/center amplified speakers.

Line-Out (Front-Out) Port Connector

Line-Out is a stereo output port through which the combined signal of all internal and external audio sources on the board is output. It can be connected to 1/8-inch TRS stereo headphones or to amplified speakers.

- 30 -

Bass/Center-Out Port

Line-Out Port (Front-Out)

B10

Line-In (Rear-Out) Port Connector

Line-In is a stereo line-level input port that accepts a 1/8-inch TRS stereo plug. It can be used as a source for digital sound recording, a source to be mixed with the output, or both.

B1 1

SPDIF_In Port

SPDIF IN connector can accept digital audio data from Optic fiber.

Line-In Port (Rear-Out)

SPDIF In Port

- 31 -

Front-Panel Connectors

ATX Power On/Off Switch Connector (PWON)

The Power On/Off Switch is a momentary type switch used for turning on or off the system ATX power supply. Attach the connector cable from the Power Switch to the 2-pin (PWON) header on the mainboard.

Note :Note :

Note : Please notice all the LED connectors are directional. If your chassis's

Note :Note :

LED does not light up during running, please simply change to the opposite direction.

Front P anel

W O N

LED

- +

/P LE

- +

JP12

RST HLED

HDD LED Connector (HLED)

Attach the connector cable from the IDE device LED to the 2-pin (HLED) header. The HDD LED lights up whenever an IDE device is active.

- 32 -

Front P anel

PW O

N G

LE D/PLE

- +

JP12

R ST

H LED

Green LED / Power LED Connector (GLED/PLED)

This header is dual color LED function. Dual color LED function is defined by either Power LED or Green LED, the

header can be in these states. The Green LED indicates that the system is currently in one of the power sav-

ing mode (Doze/Standby/Suspend). When the system resumes to normal operation mode, the Green LED will go off, power LED on.

This Power LED will go off during power saving mode. Attach a 2-pin Green LED/Power LED cable to (GLED/PLED) header.

2 4

PLE D

Hardware Reset Connector (RST)

2 4

Attach the 2-pin hardware reset switch cable to the (RST) header. Pressing the reset switch causes the system to restart.

LE D

Front P anel

W O N

LED

- +

/P LE

Front P anel

W O N

LED

- +

/P LE

- +

JP12

- +

JP12

RST HLED

- 33 -

USB port 2

USB port 3

Extended USB Header (JP6/JP7)

The headers are used to connect the cable attached to USB connectors which are mounted on front panel or back panel. But the USB cable is optional at the time of purchase.

1 3 5 7 9

2 4 6 8 10

Pins Assignment: 1=+5V 3=USBD0- 5=USBD0+ 7=GND 9=KEY

2=+5V 4=USBD1- 6=USBD1+ 8=GND 10=N/A

Front-Panel 1394 Header (JP3)

The header is used to connect the cable attached to 1394 connector which are mounted on front panel or back panel. But the 1394 cable is optional at the time of purchase.

9 7 5 3 1

USB

JP6 JP7

Pins Assignment: 1=TPA+ 2=TPA3=GND 4=GND 5=TPB+ 6=TPB7=+12V 8=+12V 9=KEY 10=GND

- 34 -

9 7 5 3 1

JP3

SPDIF_Out Headers (JP10)

Port JP10 can be used to connect special device.

SPD IF_Out

2 4 6 8 10

JP10

Pin Assignments: 1=+12V 2=VCC 3=N/A 4=SPDIF-OUT 5=N/A 6=GND 7=N/A 8=N/A 9=KEY 10=GND

Front-Panel Microphone and Line_out Header (JP11)

This header allows users to install auxiliary front-oriented microphone and lineout ports for easier access. Either the Mic and Line_out connector on backpanel or JP11 header are available. If you would like to use this JP11 header on front-panel, please remove all jumpers from JP11 and install your special Extra Mic/Line_out cable instead.

Two mini jumpers must be setted on pin5-6 and

Line-Out/MI

pin9-10, when this header is not used.

JP11

Pins Assignment:

1=AUD_MIC 2=AUD_GND 3=AUD_MIC_VCC 4=AUD_RESERVE 5=AUD_FRONT_R 6=AUD_RET_R

7=HP_ON 8=KEY 9=AUD_FRONT_L 10=AUD_RET_L

- 35 -

Internal Peripherals Connectors

Enhanced IDE and Floppy Connectors

D2 D3

The mainboard features two 40-pin dual-channel IDE device connectors (IDE1/IDE2) providing support for up to four IDE devices, such as CD-ROM and Hard Disk Drives (H.D.D.).

This mainboard also includes one 34-pin floppy disk controller (FDC) to accommodate the Floppy Disk Drive (FDD). Moreover, this mainboard comes with one 80-pin ATA and one 34-pin ribbon cable for F.D.D. connection.

100/66100/66

100/66 ribbon cable to connect to IDE H.D.D.

100/66100/66

FD D

IDE 2

IDE 1

Important:Important:

Important:Ribbon cables are directional, therefore, make sure to always

Important:Important:

connect with the red cable stripe on the same side as pin #1 of the IDE1/IDE2 or FDC connector on the mainboard.

- 36 -

F F

Other Connectors

ATX Power Supply Connectors (CN6 and CN7)

This motherboard uses 20-pin (CN7) Pentium 4 standard ATX power header, and CN6 with 1X4-pin +12V PC ATX power supply headers.

Please make sure you plug in the right direction.

P4 ATX Power supply headersP4 ATX Power supply headers

P4 ATX Power supply headers

P4 ATX Power supply headersP4 ATX Power supply headers

ATX12V

CN7 CN6

CN7

Note 1:Note 1:

Note 1:

Note 1:Note 1:

Note 2:Note 2:

Note 2: Make sure the latch of the ATX power connector clicks into place to

Note 2:Note 2:

Note 3:Note 3:

Note 3: Your ATX power supply must be supplied to ACPI +5V standby power

Note 3:Note 3:

Note 4:Note 4:

Note 4: Make sure your power supply have enough power for higher speed

Note 4:Note 4:

The ATX power connector is directional and will not go in unless the guides match perfectly making sure that pin#1 is properly positioned.

ensure a solid attachment.

and at least 720mA compatible.

processor installed.

CN6

ATXPWR

- 37 -

8 6 4 2

7 5 3 1

GND

CPU and System Fan Connectors - FAN1/2/3

E3 E4

The mainboard provides three onboard 12V cooling fan power connectors to support System (FAN1), Chipset (FAN2), or CPU (FAN3) cooling fans.

GND +12V

SENSE

FAN1

FAN1/2/3 with rotate sense.

Note:Note:

Note:

Note:Note:

Both cable wiring and type of plug may vary , which depends on the fan maker. Keep in mind that the red wire should always be connected to the +12V header and the black

wire to the ground (GND) header.

Audio CD_IN Connector (CN5) (Black)

Port CN5 is used to attach an audio connector cable from the CD-ROM drive.

CD_IN Left CD_IN Right

CD-IN

CN5

FAN3

FAN2

Wireless Keyboard and Mouse Connector (JP5)

Port JP5 can be used to connect wireless keyboard and mouse device.

Wireless KB/MS

Pin Assignments: 1=+5V 2=KEY 3=MS-DT 4=KB-DT 5=MS-CK 6=KB-CK 7=GND 8=GND

- 38 -

JP5

Parallel Port Header (JP9)

One DB25 male parallel port header is located at the rear panel of the maiboard. The header is used to connect the cable attached to parallel connector. But the parallel cable and connector os optional at the time of purchase.

E8 IR Header (JP8)

If you have an infrared device, this mainboard can implement IR tranfer function. To enable the IR transfer function, follow these steps:

Paralle P ort

5 3 1

Pin Assignment: 1=NC 2=KEY 3=+5V 4=GND 5=IRTX 6=IRRX

NoteNote

Note: Before connect your IR device, please be sure each IR on board pin

NoteNote allocation is matchable with the pin of the IR device. Other wise, incorrect IR connection may do damage to your IR device.

Step1Step1

Step1: Attach the 6-pin infrared device cable to JP8.

Step1Step1 (Refer to the above diagram for IR pin assignment.) Step2Step2

Step2: This mainboard support IrDA, or Normal transfer modes.

Step2Step2

IR Head

JP8

- 39 -

3.3 System Memory Configuration

The FB51 mainboard has two 184-pin DIMM slots that allow you to install from 64MB up to 2GB of system memory.

Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommodate 64MB, 128MB, 256MB, 512MB, and 1GB of PC1600/PC2100/PC2700 compliant 2.5V single (1 Bank) or double (2 Bank) side 64-bit wide data path DDR SDRAM modules.

Install Memory:

Install memory in any or all of the slots and in any combination shown as follows.

DIMM Soc ket Memory Modules

DIMM 1

DIMM 2

Note:Note:

Note:

Note:Note:

Note: You do not need to set any jumper to configure memory since the

Note:Note:

BIOS utility can detect the system memory automatically. You can check the total system memory value in the BIOS Setup menu.

Don't support double-sided X16 DDR DIMMs.

64MB, 128MB, 256MB, 512M ,and 1GB 184-pin 2.5V DDR SDRAM DIMM

Maximum installed memory is 2GB.Maximum installed memory is 2GB.

Maximum installed memory is 2GB.

Maximum installed memory is 2GB.Maximum installed memory is 2GB.

Upgrade Memory:

You can easily upgrade the system memory by inserting additional DDR SDRAM modules in available DIMM slots. The total system memory is calculated by simply adding up the memory in all DIMM slots. After upgrade, the new system memory value will automatically be computed and displayed in the field "

Standard CMOS Setup" of BIOS setup program.

Module

Quantity

x 1

Standard CMOS

- 40 -

4 SOFTW ARE UTILITY

4.1 Mainboard CD Overview

Note: Note:

Note: The CD contents attached in FB51 mainboard are subject to

Note: Note:

change without notice.

To start your mainboard CD disc, just insert it into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click or run D:\Autorun.exe (assuming that your CD-ROM drive is drive D:)

Navigation Bar Description:Navigation Bar Description:

Navigation Bar Description:

Navigation Bar Description:Navigation Bar Description:

Install Mainboard SoftwareInstall Mainboard Software

Install Mainboard Software - Installing Intel Chipset, Intel Ultra ATA,

Install Mainboard SoftwareInstall Mainboard Software

VGA Device, Audio, USB2.0, LAN drivers.

ManualManual

Manual - FB51 Series mainboard user's manual in PDF format.

ManualManual Link to Shuttle HomepageLink to Shuttle Homepage

Link to Shuttle Homepage - Link to shuttle website homepage.

Link to Shuttle HomepageLink to Shuttle Homepage Browse this CDBrowse this CD

Browse this CD - Allows you to see contents of this CD.

Browse this CDBrowse this CD QuitQuit

Quit - Close this CD.

QuitQuit

- 41 -

4.2 Install Mainboard Software

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

SoftwareSoftware

Software" bar to install Mainboard Software.

SoftwareSoftware

The Mainboard FB51 Software include: [4.2.A] [4.2.A]

[4.2.A] Intel Chipset driver

[4.2.A] [4.2.A] [4.2.B] [4.2.B]

[4.2.B] Intel Ultra ATA driver

[4.2.B] [4.2.B] [4.2.C] [4.2.C]

[4.2.C] Intel VGA driver

[4.2.C] [4.2.C] [4.2.D] [4.2.D]

[4.2.D] Intel Audio driver

[4.2.D] [4.2.D] [4.2.E] [4.2.E]

[4.2.E] Intel USB2.0 driver

[4.2.E] [4.2.E] [4.2.F] [4.2.F]

[4.2.F] Intel LAN driver

[4.2.F] [4.2.F]

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install MainboardInstall Mainboard

Install Mainboard

Install MainboardInstall Mainboard

- 42 -

4.2.A Install Intel Chipset Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in

SetupSetup

Setup screen.

SetupSetup

Select using your pointing device (e.g. mouse) on the 

DriverDriver

Driver" bar to install Intel chipset driver.

DriverDriver

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install Intel ChipsetInstall Intel Chipset

Install Intel Chipset

Install Intel ChipsetInstall Intel Chipset

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you installation effect.

rebootreboot

reboot the system to take the

rebootreboot

- 43 -

4.2.B Install IDE Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

bar to install IDE driver.

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install IDE DriverInstall IDE Driver

Install IDE Driver

Install IDE DriverInstall IDE Driver

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you installation effect.

rebootreboot

reboot the system to take the

rebootreboot

- 44 -

4.2.C Install VGA Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

DriverDriver

Driver" bar to install Hardware Audio driver.

DriverDriver

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install VGA DeviceInstall VGA Device

Install VGA Device

Install VGA DeviceInstall VGA Device

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you installation effect.

rebootreboot

reboot the system to take the

rebootreboot

- 45 -

4.2.D Install Audio Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

DriverDriver

Driver" bar to install Audio driver.

DriverDriver

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install AudioInstall Audio

Install Audio

Install AudioInstall Audio

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you installation effect.

rebootreboot

reboot the system to take the

rebootreboot

- 46 -

4.2.E Install USB2.0 Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

DriverDriver

Driver" bar to install LAN driver.

DriverDriver

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install USB2.0Install USB2.0

Install USB2.0

Install USB2.0Install USB2.0

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you the installation effect.

Note: Note:

Note: Only visible on Windows XP/2000.

Note: Note:

rebootreboot

reboot the system to take

rebootreboot

- 47 -

4.2.F Install LAN Driver

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the 

bar to install LAN driver.

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard Software Shuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard Software Shuttle Mainboard Software

Install LAN DriverInstall LAN Driver

Install LAN Driver

Install LAN DriverInstall LAN Driver

Once you made your selection, a Setup window run the installation automatically. When the copying files is done, make sure you the installation effect.

rebootreboot

reboot the system to take

rebootreboot

- 48 -

Install WIN98 LAN driverInstall WIN98 LAN driver

Install WIN98 LAN driver

Install WIN98 LAN driverInstall WIN98 LAN driver The LAN Device Driver can't install automatically, you need double click on

My ComputerMy Computer

My Computer ->

My ComputerMy Computer Properties Properties

Properties screen.

Properties Properties

Control PanelControl Panel

Control Panel ->

Control PanelControl Panel

System System

System icon to bring up

System System

SystemSystem

System

SystemSystem

Select tab You will find a yellow "?" mark at

Ethernet ControllerEthernet Controller

Ethernet Controller,

Ethernet ControllerEthernet Controller driver is not recognize.

Double click on the Controller.Controller.

Controller.

Controller.Controller.

Then tiesties

ties windows will appear on your

tiesties screen.

Click on the install driver.

"Device Manager" "Device Manager"

"Device Manager".

"Device Manager" "Device Manager"

that means the

EthernetEthernet

Ethernet

EthernetEthernet

PCI Ethernet Controller Proper-PCI Ethernet Controller Proper-

PCI Ethernet Controller Proper-

PCI Ethernet Controller Proper-PCI Ethernet Controller Proper-

"Reinstall Driver" "Reinstall Driver"

"Reinstall Driver" bar to

"Reinstall Driver" "Reinstall Driver"

PCIPCI

PCI

PCIPCI

Updade Device Driver WizardUpdade Device Driver Wizard

The

Updade Device Driver Wizard

Updade Device Driver WizardUpdade Device Driver Wizard

windows will appear on your screen. Click on

Please choose drivers in a specific location, so youdrivers in a specific location, so you

drivers in a specific location, so you

drivers in a specific location, so youdrivers in a specific location, so you can select the driver you want" can select the driver you want"

can select the driver you want" to

can select the driver you want" can select the driver you want" the manual install driver, and click on "Next" "Next"

"Next" bar to continue.

"Next" "Next"

"Next" bar to continue.

"Next" "Next"

"Display a list of the"Display a list of the

"Display a list of the

"Display a list of the"Display a list of the

- 49 -

Select LAN device and click on continue.

Insert the support CD by the mainboard manufacturer and choose " bar

Indicate the driver's location as "D:\lan\WIN98\NETRTS5.INF""D:\lan\WIN98\NETRTS5.INF"

"D:\lan\WIN98\NETRTS5.INF" (In this

"D:\lan\WIN98\NETRTS5.INF""D:\lan\WIN98\NETRTS5.INF" location CD disk drive is supposed to be

"Network adapters" "Network adapters"

"Network adapters" bar

"Network adapters" "Network adapters"

to continue next step.

"D""D"

"D" letter.)

"D""D"

"Next" "Next"

"Next" bar to

"Next" "Next"

for

Have Disk"Have Disk"

Have Disk"

Have Disk"Have Disk"

Select ily PCI Fast Ethernet NIC" ily PCI Fast Ethernet NIC"

ily PCI Fast Ethernet NIC" to install,

ily PCI Fast Ethernet NIC" ily PCI Fast Ethernet NIC" and

Make sure Family PCI Fast Ethernet NIC" Family PCI Fast Ethernet NIC"

Family PCI Fast Ethernet NIC" driver,

Family PCI Fast Ethernet NIC" Family PCI Fast Ethernet NIC" and click on

Then the system will do the setup procedure automatically.

"Realtek RTL8139/810X Fam-"Realtek RTL8139/810X Fam-

"Realtek RTL8139/810X Fam-

"Realtek RTL8139/810X Fam-"Realtek RTL8139/810X Fam-

then click on

"Realtek RTL8139/810X

"OK""OK"

"OK".

"OK""OK"

"Realtek RTL8139/810X"Realtek RTL8139/810X

"Next""Next"

"Next".

"Next""Next"

- 50 -

Completing the upgrade device driver, and click on

system to take all the changes effect.

After restart, you may check Network adapters under the location mentioned at right figure.

The Network adapters shows correctly.

"Finish""Finish"

"Finish" to restart the

"Finish""Finish"

- 51 -

4.3 View the User's Manual

Insert the attached CD into your CD-ROM drive and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on AutoRun icon in SetupSetup

Setup screen.

SetupSetup Select using your pointing device (e.g. mouse) on the "

My ComputerMy Computer

My Computer to bring up

My ComputerMy Computer

Shuttle Mainboard SoftwareShuttle Mainboard Software

Shuttle Mainboard Software

Shuttle Mainboard SoftwareShuttle Mainboard Software

Manual Manual

Manual " bar.

Manual Manual

Online Information Online Information

Then

Online Information windows will appear on your screen. Click on the

Online Information Online Information

Install Acrobat ReaderInstall Acrobat Reader

Install Acrobat Reader " bar if you need to install acrobat reader.

Install Acrobat ReaderInstall Acrobat Reader

Then click on

"FB51 Manual""FB51 Manual"

"FB51 Manual" bar to view user's manual.

"FB51 Manual""FB51 Manual"

- 52 -

5 BIOS SETUP

FB51 BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This information is stored in battery-backed RAM so that it retains the Setup information even if the system power is turned off.

The system BIOS is managing and executing a variety of hardware related functions in the system, including:

System date and time Hardware execution sequence Power management functions Allocation of system resources

5.1 Enter the BIOS

To enter the BIOS (Basic Input / Output System) utility, follow these steps:

Step 1.Step 1.

Step 1. Power on the computer, and the system will perform its

Step 1.Step 1.

POST (Power-On Self Test) routine checks.

Step 2.Step 2.

Step 2. Press <Del> key immediately, or at the following message:

Step 2.Step 2.

Press DEL to enter SETUP ,or simultaneously press <Ctrl>, <Alt>, <Esc> keys

Note 1.Note 1.

Note 1. If you miss trains of words meationed in step2 (the message

Note 1.Note 1.

disappears before you can respond) and you still wish to enter BIOS Setup, restart the system and try again by turning the computer OFF and ON again or by pressing the <RESET> switch located at the computer's front-panel. You may also reboot by simultaneously pressing the <Ctrl>, <Alt>, <Del> keys.

Note 2.Note 2.

Note 2. If you do not press the keys in time and system does not boot,

Note 2.Note 2.

the screen will prompt an error message, and you will be given the following options:

" Press F1 to Continue, DEL to Enter Setup "" Press F1 to Continue, DEL to Enter Setup "

" Press F1 to Continue, DEL to Enter Setup "

" Press F1 to Continue, DEL to Enter Setup "" Press F1 to Continue, DEL to Enter Setup "

Step 3.Step 3.

Step 3. As you enter the BIOS program, the CMOS Setup Utility will

Step 3.Step 3.

prompt you the Main Menu, as shown in the next section.

- 53 -

5.2 The Main Menu

Once you enter the AwardBIOS(tm) CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.

Note that a brief description of each highlighted selection appears at the bottom of the screen.

Setup Items

The main menu includes the following main setup categories. Recall that some systems may not include all entries.

Standard CMOS Features

Use this menu for basic system configuration.

Advanced BIOS Features

Use this menu to set the Advanced Features available on your system.

Advanced Chipset Features

Use this menu to change the values in the chipset registers and optimize your system's performance.

Integrated Peripherals

Use this menu to specify your settings for integrated peripherals.

Power Management Setup

Use this menu to specify your settings for power management.

PnP / PCI Configurations

This entry appears if your system supports PnP / PCI.

- 54 -

PC Health Status

This entry shows the current system temperature, Voltage, and FAN speed.

Frequency/Voltage Control

Use this menu to specify your settings for frequency/voltage control.

Load Fail-Safe Defaults

Use this menu to load the BIOS default values for the minimal/stable performance of your system to operate.

Load Optimized Defaults

Use this menu to load the BIOS default values that are factory-set for optimal performance system operation. While Award has designed the custom BIOS to maximize performance, the factory has the right to change these defaults to meet users' needs.

Set Password

Use this menu to change, set, or disable password. It allows you to limit access to the system and Setup, or only to Setup.

Save & Exit Setup

Save CMOS value changes in CMOS and exit from setup.

Exit Without Saving

Abandon all CMOS value changes and exit from setup.

- 55 -

Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.

DateDate

Date

DateDate

<Month> <DD> <YYYY> Set the system date. Note that the 'Day' automatically changes when

you set the date.

TimeTime

Time

TimeTime

<HH : MM : SS> The time is converted based on the 24-hour military-time clock. For

example, 5 p.m. is 17:00:00.

IDE Primary MasterIDE Primary Master

IDE Primary Master

IDE Primary MasterIDE Primary Master

Options are in its sub-menu. Press <Enter> to enter the sub-menu of detailed options.

IDE Primary SlaveIDE Primary Slave

IDE Primary Slave

IDE Primary SlaveIDE Primary Slave

Options are in its sub-menu. Press <Enter> to enter the sub-menu of detailed options.

IDE Secondary MasterIDE Secondary Master

IDE Secondary Master

IDE Secondary MasterIDE Secondary Master

Options are in its sub-menu. Press <Enter> to enter the sub-menu of detailed options.

- 56 -

IDE Secondary SlaveIDE Secondary Slave

IDE Secondary Slave

IDE Secondary SlaveIDE Secondary Slave

Options are in its sub-menu. Press <Enter> to enter the sub-menu of detailed options.

Drive A/Drive BDrive A/Drive B

Drive A/Drive B

Drive A/Drive BDrive A/Drive B

Select the type of floppy disk drive installed in your system. Ø The choice: None, 360K, 5.25 in, 1.2M, 5.25 in, 720K, 3.5 in,

1.44M, 3.5 in, or 2.88M, 3.5 in.

VideoVideo

Video

VideoVideo

Select the default video device. Ø The choice: EGA/VGA, CGA 40, CGA 80, or MONO.

Halt OnHalt On

Halt On

Halt OnHalt On

Select the situation in which you want the BIOS to stop the POST process and notify you.

Ø The choice: All Errors, No Errors, All, But Keyboard, All, But

Diskette, or All, But Disk/Key.

Base MemoryBase Memory

Base Memory

Base MemoryBase Memory

Displays the amount of conventional memory detected during boot up. Ø The choice: N/A.

Extended MemoryExtended Memory

Extended Memory

Extended MemoryExtended Memory

Displays the amount of extended memory detected during boot up. Ø The choice: N/A.

Total MemoryTotal Memory

Total Memory

Total MemoryTotal Memory

Displays the total memory available in the system. Ø The choice: N/A.

************************************************************************************************************

******************************************************

************************************************************************************************************

IDE Adapters

The IDE adapters control the hard disk drive. Use a separate sub-menu to configure each hard disk drive.

IDE HDD Auto-DetectionIDE HDD Auto-Detection

IDE HDD Auto-Detection

IDE HDD Auto-DetectionIDE HDD Auto-Detection Press <Enter> to auto-detect HDD on this channel. If detection is successful, it fills the remaining fields on this menu.

Ø Press Enter

- 57 -

IDE Primary MasterIDE Primary Master

IDE Primary Master

IDE Primary MasterIDE Primary Master Selecting 'manual' lets you set the remaining fields on this screen and select the type of fixed disk. "User Type" will let you select the number of cylinders, heads, etc., Note: PRECOMP=65535 means

NONE !

Ø The choice: None, Auto, or Manual.

Access ModeAccess Mode

Access Mode

Access ModeAccess Mode Choose the access mode for this hard disk.

Ø The choice: CHS, LBA, Large, or Auto.

CapacityCapacity

Capacity

CapacityCapacity Disk drive capacity (Approximated). Note that this size is usually slightly greater than the size of a formatted disk given by a disk checking program.

Ø Auto-Display your disk drive size.

The following options are selectable only if the 'IDE Primary Master' item is set to 'Manual', and Access mode set to CHS.

CylinderCylinder

Cylinder

CylinderCylinder Set the number of cylinders for this hard disk.

Ø Min = 0, Max = 65535

HeadHead

Head

HeadHead Set the number of read/write heads.

Ø Min = 0, Max = 255

PrecompPrecomp

Precomp

PrecompPrecomp Warning: Setting a value of 65535 means no hard disk.

Ø Min = 0, Max = 65535

Landing zoneLanding zone

Landing zone

Landing zoneLanding zone Set the Landing zone size.

Ø Min = 0, Max = 65535

SectorSector

Sector

SectorSector Number of sector per track.

Ø Min = 0, Max = 255

************************************************************************************************************

******************************************************

************************************************************************************************************

- 58 -

Advanced BIOS Features

This section allows you to configure your system for basic operation. You have the opportunity to select the system's default speed, boot-up sequence, keyboard operation, shadowing, and security.

Virus WarningVirus Warning

Virus Warning

Virus WarningVirus Warning

Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enables and someone attempts to write data into this area, BIOS will show a warning message on screen, and an alarm beep.

EnabledEnabled

Enabled Activates automatically when the system boots up,

EnabledEnabled

causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table.

DisabledDisabled

Disabled No warning message will appear when anything

DisabledDisabled

attempts to access the boot sector or hard disk partition table.

Ø The choice: Enabled or Disabled.

CPU L1 & L2 CacheCPU L1 & L2 Cache

CPU L1 & L2 Cache

CPU L1 & L2 CacheCPU L1 & L2 Cache

This item enables CPU L1 internal and CPU L2 cache to speed up memory access.

Ø The choice: Enabled or Disabled.

CPU Hyper-ThreadingCPU Hyper-Threading

CPU Hyper-Threading

CPU Hyper-ThreadingCPU Hyper-Threading

This itme allows you to enable/disable CPU Hyper-Threading function. If it is set to enabled, the CPU performance will better.

Ø The choice: Enabled, or Disabled.

- 59 -

Quick Power On Self TestQuick Power On Self Test

Quick Power On Self Test

Quick Power On Self TestQuick Power On Self Test

This item speeds up Power-On Self Test (POST) after you power on the computer. If it is set to enabled, BIOS will shorten or skip some check items during POST.

Ø The choice: Enabled, or Disabled.

First/Second/Third Boot DeviceFirst/Second/Third Boot Device

First/Second/Third Boot Device

First/Second/Third Boot DeviceFirst/Second/Third Boot Device

The BIOS attempts to load the operating system from the devices in the sequence selected in these items.

Ø The Choice: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1,

HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM,

USB- HDD,LAN, or Disabled.

Boot Other DeviceBoot Other Device

Boot Other Device

Boot Other DeviceBoot Other Device

Select Your Boot Device Priority. Ø The choice: Enabled or Disabled.

Swap Floppy DriveSwap Floppy Drive

Swap Floppy Drive

Swap Floppy DriveSwap Floppy Drive

If the system has two floppy drives, you can swap the logical drive name assignment.

Ø The choice: Enabled or Disabled.

Boot Up Floppy SeekBoot Up Floppy Seek

Boot Up Floppy Seek

Boot Up Floppy SeekBoot Up Floppy Seek

Seeks disk drives during boot-Up. Disabling speed boots up. Ø The choice: Enabled or Disabled.

Boot Up NumLock StatusBoot Up NumLock Status

Boot Up NumLock Status

Boot Up NumLock StatusBoot Up NumLock Status

Selects power-on state for NumLock. Ø The choice: Off or On.

Gate A20 OptionGate A20 Option

Gate A20 Option

Gate A20 OptionGate A20 Option

This entry allows you to select how the Gate A20 is handled. The gate A20 is a device used for above 1MByte of address memory. Initially, the gate A20 was handled via a pin on the keyboard. Today, while a keyboard still provides this support, it is more common and much faster in setting to fast for the system chipset to provide support for gate A20.

Ø The choice: Normal or Fast.

Typematic Rate SettingTypematic Rate Setting

Typematic Rate Setting

Typematic Rate SettingTypematic Rate Setting

Keystrokes repeat at a rate determined by the keyboard controller. When this controller enabled, the typematic rate and typematic delay can be selected.

Ø The choice: Enabled or Disabled.

- 60 -

Typematic Rate (Chars/Sec)Typematic Rate (Chars/Sec)

Typematic Rate (Chars/Sec)

Typematic Rate (Chars/Sec)Typematic Rate (Chars/Sec)

This item sets how many times the keystroke will be repented in a second when you hold the key down.

Ø The choice: 6, 8, 10, 12, 15, 20, 24, or 30.

Typematic Delay (Msec)Typematic Delay (Msec)

Typematic Delay (Msec)

Typematic Delay (Msec)Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat the keystroke.

Ø The choice: 250, 500, 750, or 1000.

Security OptionSecurity Option

Security Option

Security OptionSecurity Option

Select whether the password is required every time the system boots or only when you enter setup.

SystemSystem

System The system will not boot and access to Setup will be

SystemSystem

denied if the correct password is not entered promptly.

SetupSetup

Setup The system will boot, but access to Setup will be

SetupSetup

denied if the correct password is not entered promptly.

Ø The choice: System or Setup. Note: Note:

Note: To disabled security, select PASSWORD SETTING at Main

Note: Note: Menu, and then you will be asked to enter password. Don't type anything and just press <Enter>; it will disable security. Once the security is disabled, the system will boot, and you can enter Setup freely.

APIC ModeAPIC Mode

APIC Mode

APIC ModeAPIC Mode

Selects enable/disable IO APIC function. Ø The choice: Enabled or Disabled.

MPS Version Control For OSMPS Version Control For OS

MPS Version Control For OS

MPS Version Control For OSMPS Version Control For OS

Selects the operating system multiprocessor support version. Ø The choice: 1.1 or 1.4

OS Select For DRAM > 64MBOS Select For DRAM > 64MB

OS Select For DRAM > 64MB

OS Select For DRAM > 64MBOS Select For DRAM > 64MB

Selects the operating system that is running with greater than 64MB of RAM in the system.

Ø The choice: Non-OS2 or OS2.

Report No FDD For Win 95Report No FDD For Win 95

Report No FDD For Win 95

Report No FDD For Win 95Report No FDD For Win 95

Whether report no FDD runs for Win 95 or not. Ø The choice: Yes or No.

Small Logo(EPA) ShowSmall Logo(EPA) Show

Small Logo(EPA) Show

Small Logo(EPA) ShowSmall Logo(EPA) Show

This item allows you to enable/disable the EPA Logo. Ø The choice: Enabled or Disabled.

- 61 -

Advanced Chipset Features

This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and access to system memory resources, such as DRAM and the external cache. It also coordinates communications between the conventional ISA bus and the PCI bus. It states that these items should never need to be altered.

The default settings have been chosen because they provide the best operating conditions for your system. If you discovered that data was being lost while using your system, you might consider making any changes.

DRAM Timing SelectableDRAM Timing Selectable

DRAM Timing Selectable

DRAM Timing SelectableDRAM Timing Selectable

The value in this field depends on performance parameters of the installed memory chips(DRAM). Don't change the value from the factory setting unless you install new memory that has a different performance rating than the original DRAMs.

Ø The Choice: Manual or BySPD

CAS Latency TimeCAS Latency Time

CAS Latency Time

CAS Latency TimeCAS Latency Time

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. Don't change this field from the default value specified by the system designer.

Ø The Choice: 1.5, 2, 2.5, or 3.

Active to Precharge DelayActive to Precharge Delay

Active to Precharge Delay

Active to Precharge DelayActive to Precharge Delay

The precharge time is the number of cycles it takes for DRAM to accumulate its charge before refresh.

Ø The Choice: 7, 6, or 5.

- 62 -

DRAM RAS # to CAS # DelayDRAM RAS # to CAS # Delay

DRAM RAS # to CAS # Delay

DRAM RAS # to CAS # DelayDRAM RAS # to CAS # Delay

This field lets you insert a timing delay between the CAS and RAS strobe signals, and you can use it when DRAM is written to, read from, or refreshed. Faster performance is gained in high speed, more stable performance, in low speed. This field is applied only when synchronous DRAM is installed in the system.

Ø The Choice: 3 or 2.

DRAM RAS # PrechargeDRAM RAS # Precharge

DRAM RAS # Precharge

DRAM RAS # PrechargeDRAM RAS # Precharge

If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be-incompleted, and the DRAM may fail to retain data. Fast gives faster performance; and Slow gives more stable performance. This field is applied only when synchronous DRAM is installed in the system.

Ø The Choice: 3 or 2.

Turbo ModeTurbo Mode

Turbo Mode

Turbo ModeTurbo Mode

This item allows you to enable or disable the Turbo Mode. Ø The Choice: Enabled or Disabled.

Memory Frequency ForMemory Frequency For

Memory Frequency For

Memory Frequency ForMemory Frequency For

This item is select SDRAM Frequency. Ø The Choice: DDR200, DDR266, DDR333, or AUTO.

System BIOS CacheableSystem BIOS Cacheable

System BIOS Cacheable

System BIOS CacheableSystem BIOS Cacheable

Selecting Enabled allows caching of the system BIOS ROM at F0000h~FFFFFh, resulting in better system performance. However, if any program is written to this memory area, a system error may result.

Ø The Choice: Enabled or Disabled.

Video BIOS CacheableVideo BIOS Cacheable

Video BIOS Cacheable

Video BIOS CacheableVideo BIOS Cacheable

Selecting Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program is written to this memory area, a system error may result.

Ø The Choice: Enabled or Disabled.

Memory Hole At 15M-16MMemory Hole At 15M-16M

Memory Hole At 15M-16M

Memory Hole At 15M-16MMemory Hole At 15M-16M

You can reserve this area of system memory for ISA adapter ROM. When this area is reserved, it can't be cached. The user information of peripherals that need to use this area of system memory usually discusses their memory requirements.

Ø The Choice: Enabled or Disabled.

- 63 -

Delay TransactionDelay Transaction

Delay Transaction

Delay TransactionDelay Transaction

The chipset has an embedded 32-bit posted write buffer to support delayed transactions cycles. Enabled this item to support compliance with PCI specification version 2.1.

Ø The Choice: Enabled or Disabled.

Delay Prior to ThermalDelay Prior to Thermal

Delay Prior to Thermal

Delay Prior to ThermalDelay Prior to Thermal

Enable this item to set the delay time before the CPU enters auto thermal mode.

Ø The Choice: 4Min, 8Min, 16Min, or 32Min.

AGP Aperture Size(MB)AGP Aperture Size(MB)

AGP Aperture Size(MB)

AGP Aperture Size(MB)AGP Aperture Size(MB)

This item defines the size of the aperture if you use an AGP graphics adapter. The AGP aperture refers to section of the PCI memory address range used for graphics memory. We recommend that you leave this item at the default value.

Ø The Choice: 4, 8, 16, 32, 64, 128, or 256.

**********

On-Chip VGAOn-Chip VGA

On-Chip VGA

On-Chip VGAOn-Chip VGA

This item allows you to enable or disable On-Chip AGP. Ø The Choice: 1MB or 8MB.

On-Chip Frame Buffer SizeOn-Chip Frame Buffer Size

On-Chip Frame Buffer Size

On-Chip Frame Buffer SizeOn-Chip Frame Buffer Size

This item allows you to set the VGA frame buffer size. Ø The Choice: Enabled or Disabled.

Boot DisplayBoot Display

Boot Display

Boot DisplayBoot Display

Ø The Choice: Auto, CRT, TV, or EFP.

On -Chip VGA Setting On -Chip VGA Setting

On -Chip VGA Setting **********

On -Chip VGA Setting On -Chip VGA Setting

- 64 -

Integrated Peripherals

On-Chip Primary /Secondary PCI IDEOn-Chip Primary /Secondary PCI IDE

On-Chip Primary /Secondary PCI IDE

On-Chip Primary /Secondary PCI IDEOn-Chip Primary /Secondary PCI IDE

Use these items to enable or disable the PCI IDE channels that are integrated on the mainboard.

Ø The choice: Enabled or Disabled.

IDE Primary Master/Primary Slave/Secondary Master/SecondaryIDE Primary Master/Primary Slave/Secondary Master/Secondary

IDE Primary Master/Primary Slave/Secondary Master/Secondary

IDE Primary Master/Primary Slave/Secondary Master/SecondaryIDE Primary Master/Primary Slave/Secondary Master/Secondary Slave PIOSlave PIO

Slave PIO

Slave PIOSlave PIO

Each IDE channel supports a master device and a slave device. These four items let you assign which kind of PIO ( Programmed Input / Output ) is used by IDE devices. Choose Auto to let the system auto detect which PIO mode is best or select a PIO mode from 0-4.

Ø The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.

IDE Primary Master/Primary Slave/Secondary Master/SecondaryIDE Primary Master/Primary Slave/Secondary Master/Secondary

IDE Primary Master/Primary Slave/Secondary Master/Secondary

IDE Primary Master/Primary Slave/Secondary Master/SecondaryIDE Primary Master/Primary Slave/Secondary Master/Secondary Slave UDMASlave UDMA

Slave UDMA

Slave UDMASlave UDMA

Each IDE channel supports a master device and a slave device. This mainboard supports UltraDMA technology, which provides faster access to IDE devices.

If you install a device that supports UltraDMA, change the appropriate item on this list to Auto. You may have to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA device.

Ø The Choice: Auto or Disabled.

- 65 -

USB ControllerUSB Controller

USB Controller

USB ControllerUSB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) port on this mainboard.

Ø The choice: Enabled or Disabled.

USB 2.0 ControllerUSB 2.0 Controller

USB 2.0 Controller

USB 2.0 ControllerUSB 2.0 Controller

Select Enabled if your system contains a Universal Serial Bus (USB) 2.0 controller and you have USB peripherals.

Ø The choice: Enabled or Disabled.

USB Keyboard SupportUSB Keyboard Support

USB Keyboard Support

USB Keyboard SupportUSB Keyboard Support

Select Enabled if you plan to use a keyboard connected through the USB port in a legacy operating system ( such as DOS ) that doesn't support Plug and Play.

Ø The choice: Enabled or Disabled.

AC97 AudioAC97 Audio

AC97 Audio

AC97 AudioAC97 Audio

This item allows you to select AC 97 audio chip to support Audio. Disable this item If you are going to install a PCI audio add-on card.

Ø The Choice: Auto or Disabled.

Init Display First (PCI Slot)Init Display First (PCI Slot)

Init Display First (PCI Slot)

Init Display First (PCI Slot)Init Display First (PCI Slot)

Use this item to specify whether your graphics adapter is installed in one of the PCI slots or is integrated on the mainboard.

Ø The choice: PCI Slot or Onboard /AGP .

IDE HDD Block ModeIDE HDD Block Mode

IDE HDD Block Mode

IDE HDD Block ModeIDE HDD Block Mode

If your IDE hard disk drive supports block mode (most new drives do), select Enabled to automatic detect the optimal number of block read and writes per sector that the drive can support and improves the speed of access to IDE devices.

Ø The choice: Enabled, or Disabled.

Onboard LAN Boot ROMOnboard LAN Boot ROM

Onboard LAN Boot ROM

Onboard LAN Boot ROMOnboard LAN Boot ROM

Decide whether to invoke the boot ROM of the onboard LAN chip. Ø The choice: Enabled, or Disabled.

POWER ON FunctionPOWER ON Function

POWER ON Function

POWER ON FunctionPOWER ON Function

Enable you to set power on paramenters. The default setting enables you to use a hot key to turn on the system.

Ø The choice: Password, Hot KEY, Mouse Move, Mouse Click, Any KEY, Button Only, Keyboard 98.

- 66 -

KB Power On PasswordKB Power On Password

KB Power On Password

KB Power On PasswordKB Power On Password

You can select this item and press " Enter " to input password if power on function select password.

Hot Key Power ONHot Key Power ON

Hot Key Power ON

Hot Key Power ONHot Key Power ON

When the POWER ON Function is set to Hot KEY, use this item to set the hot key combination that turns on the system. Ø The choice: <Ctrl-F1>~<Ctrl-F12>.

Onboard FDC ControllerOnboard FDC Controller

Onboard FDC Controller

Onboard FDC ControllerOnboard FDC Controller

This item specifices onboard floppy disk drive controller. This setting allows you to connect your floppy disk drives to the onboard floppy connector. Ø The choice: Enabled Disabled.

Onboard Serial Port1Onboard Serial Port1

Onboard Serial Port1

Onboard Serial Port1Onboard Serial Port1

This option is used to assign the I/O address and interrupt request ( IRQ ) for the onboard serial port1 ( COM1 ). Ø The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,

or Auto.

Onboard Serial Port 2Onboard Serial Port 2

Onboard Serial Port 2

Onboard Serial Port 2Onboard Serial Port 2

This option is used to assign the I/O address and interrupt request ( IRQ ) for the onboard serial port 2 ( COM2 ). Ø The choice: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,

or Auto.

UART Mode SelectUART Mode Select

UART Mode Select

UART Mode SelectUART Mode Select

This field is available if the Onboard Serial Port 2 field is set to any option but disabled. UART Mode Select enables you to select the infrared communication protocol-Normal ( default ), IrDA, or ASKIR. IrDA is an infrared communication protocol with a maximum baud rate up to 115.2K bps. ASKIR is Sharp's infrared communication protocol with a maximum baud rate up to 57.6K bps. Ø The choice: SCR, IrDA, ASKIR or Normal.

UR2 Duplex ModeUR2 Duplex Mode

UR2 Duplex Mode

UR2 Duplex ModeUR2 Duplex Mode

This item is available when UART 2 mode is set to either ASKIR or IrDA. This item enables you to determin the infrared function of the onboard infrared chip. The options are Full and Half ( default ). Full-duplex means that you can transmit and send information simultaneously. Half-duplex is the transmission of data in both directions, but only one direction at a time. Ø The choice: Full or Half.

- 67 -

Onboard Parallel PortOnboard Parallel Port

Onboard Parallel Port

Onboard Parallel PortOnboard Parallel Port

This item allows you to determine onboard parallel port controller I/O address and interrupt request ( IRQ ).

Ø The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.

Parallel Port ModeParallel Port Mode

Parallel Port Mode

Parallel Port ModeParallel Port Mode

Select an operating mode for the onboard parallel (printer) port. Select Normal, Compatible, or SPP unless you are certain your hardware and software both support one of the other available modes.

Ø The choice: SPP, EPP, ECP, or ECP+EPP.

ECP Mode Use DMAECP Mode Use DMA

ECP Mode Use DMA

ECP Mode Use DMAECP Mode Use DMA

When the onboard parallel is set to ECP mode, the parallel port can use DMA3 or DMA1.

Ø The choice: 1 or 3.

PWRON After PWR-FailPWRON After PWR-Fail

PWRON After PWR-Fail

PWRON After PWR-FailPWRON After PWR-Fail

This item select power on function when power fail. Ø The choice: Off, On, or Former-Sts.

- 68 -

Power Management Setup

The Power Management Setup allows you to configure your system to most effectively saving energy while operating in a manner consistent with your own style of computer use.

ACPI FunctionACPI Function

ACPI Function

ACPI FunctionACPI Function

This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI).

Ø The choice: Enabled or Disabled.

ACPI Suspend TypeACPI Suspend Type

ACPI Suspend Type

ACPI Suspend TypeACPI Suspend Type

This item allows you to select sleep state when suspend. Ø The choice: S1(POS), S3(STR), or S1 & S3.

Power Management Suspend ModePower Management Suspend Mode

Power Management Suspend Mode

Power Management Suspend ModePower Management Suspend Mode

This item allows you to decide the timing to enter suspend mode. Ø The choice: User Define, Min Saving, Max Saving.

Video Off MethodVideo Off Method

Video Off Method

Video Off MethodVideo Off Method

This determines the manner in which the monitor is blanked.

V/H SYNC+BlankV/H SYNC+Blank

V/H SYNC+Blank This selection will cause the system to turn off

V/H SYNC+BlankV/H SYNC+Blank

the vertical and horizontal synchronization ports and write blanks to the video buffer.

Blank ScreenBlank Screen

Blank Screen This option only writes blanks to the video

Blank ScreenBlank Screen

buffer.

DPMSDPMS

DPMS Initial display power management signaling.

DPMSDPMS

Ø The choice: V/H SYNC+Blank, Blank Screen, or DPMS Supported.

- 69 -

Video Off In SuspendVideo Off In Suspend

Video Off In Suspend

Video Off In SuspendVideo Off In Suspend

This item determines the manner in which the monitor is blanked. Ø The choice: Yes or No.

Suspend TypeSuspend Type

Suspend Type

Suspend TypeSuspend Type

This item allows you to select the Suspend Type. Ø The choice: Stop Grant or PwrOn suspend.

MODEM Use IRQMODEM Use IRQ

MODEM Use IRQ

MODEM Use IRQMODEM Use IRQ

This determines the IRQ which the MODEM can use. Ø The choice: 3, 4, 5, 7, 9, 10, 11, or NA.

Suspend ModeSuspend Mode

Suspend Mode

Suspend ModeSuspend Mode

When this item enabled and after the set up time of system inactivity, all devices except the CPU will be shut off.

Ø The choice: Disabled, 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min, 40Min, or 1Hour.

HDD Power DownHDD Power Down

HDD Power Down

HDD Power DownHDD Power Down

When this item enabled and after the set up time of system inactivity, the hard disk drive will be powered down while all other devices remain active.

Ø The choice: Disabled or 1 Min~15 Min.

Soft-Off by PWR-BTTNSoft-Off by PWR-BTTN

Soft-Off by PWR-BTTN

Soft-Off by PWR-BTTNSoft-Off by PWR-BTTN

Under ACPI you can create a software power down. In a software power down, the system can be resumed by Wake UP Alarms. This item lets you install a software power down that is controlled by the power button on your system. If the item is set to Instant-Off, then the power button causes a software power down. If the item is set to Delay4 Sec. then you have to hold the power button down for 4 seconds to cause a software power down.

Ø The choice: Instant-Off or Delay 4 Sec.

Wake-Up by PCI cardWake-Up by PCI card

Wake-Up by PCI card

Wake-Up by PCI cardWake-Up by PCI card

This item Enabled/Disabled PCI card wake up for PCI Spec 2.2. Ø The choice: Enabled or Disabled.

Power On by RingPower On by Ring

Power On by Ring

Power On by RingPower On by Ring

This item determine the system will resume by activating of modem ring.

Ø The choice: Enabled or Disabled.

- 70 -

USB KB Wake-up S3USB KB Wake-up S3

USB KB Wake-up S3

USB KB Wake-up S3USB KB Wake-up S3

If you are using a USB keyboard, and the ACPI suspend type is set to S3, you can enable this item to allow a keystroke to wake up the system from power saving mode.

Ø The choice: Enabled or Disabled.

Resume by AlarmResume by Alarm

Resume by Alarm

Resume by AlarmResume by Alarm

When this item enabled, your can set the date (day of the month) and time to turn on your system.

Ø The choice: Disabled or Enabled.

*** Reload Global Timer Events ****** Reload Global Timer Events ***

*** Reload Global Timer Events ***

*** Reload Global Timer Events ****** Reload Global Timer Events ***

Global Timer (power management) events are I/O events whose occurrence can prevent the system from entering a power saving mode or can awaken the system from such as a mode. In effect, the system remains alert for anything that occurs to a device that is configured as Enabled, even when the system is in a power-down mode.

Primary/Secondary IDE 0/1Primary/Secondary IDE 0/1

Primary/Secondary IDE 0/1

Primary/Secondary IDE 0/1Primary/Secondary IDE 0/1

When these items are enabled, the system will restart the power-saving time out counters when any activity is detected on any of the drives or devices on the primary or secondary IDE channels.

Ø The choice: Disabled or Enabled.

FDD, COM, LPT PortFDD, COM, LPT Port

FDD, COM, LPT Port

FDD, COM, LPT PortFDD, COM, LPT Port

When this item is enabled, the system will restart the power-saving timeout counters when any activity is detected on the floppy disk drive, serial ports, or the parallel port.

Ø The choice: Disabled or Enabled.

PCI PIRQ [A-D] #PCI PIRQ [A-D] #

PCI PIRQ [A-D] #

PCI PIRQ [A-D] #PCI PIRQ [A-D] #

When this item is disabled, any PCI device set as the Master will not power on the system.

Ø The choice: Disabled or Enabled.

- 71 -

PnP/PCI Configurations

This section describes the configuration of PCI bus system. PCI or Personal Computer Interconnection is a system which allows I/O devices to operate at the speed CPU itself keeps when CPU communicating with its own special components. This section covers some very technical items, and it is strongly recommended that only experienced users should make any changes to the default settings.

Reset Configuration DataReset Configuration Data

Reset Configuration Data

Reset Configuration DataReset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit from Setup if you have installed a new device or software and the system reconfiguration has caused such a serious conflict that the operating system can not boot.

Ø The choice: Enabled or Disabled .

Resource controlled ByResource controlled By

Resource controlled By

Resource controlled ByResource controlled By

The Award Plug-and-Play BIOS has the capacity to automatically configure all of the boot and Plug-and-Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug-and-Play operating system such as Windows 95.

If you set this field to "manual" , choose specific resources by going into each of the sub-menu that follows this field (a sub-menu is proceeded by a ">").

Ø The choice: Auto(ESCD) or Manual.

IRQ ResourcesIRQ Resources

IRQ Resources

IRQ ResourcesIRQ Resources

When resources are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt.

- 72 -

IRQ3/4/5/7/9/10/11/12/14/15 assignedIRQ3/4/5/7/9/10/11/12/14/15 assigned

IRQ3/4/5/7/9/10/11/12/14/15 assigned

IRQ3/4/5/7/9/10/11/12/14/15 assignedIRQ3/4/5/7/9/10/11/12/14/15 assigned This item allows you to determine the IRQ assigned to the ISA bus and is not available to any PCI slot. Legacy ISA for devices is compliant with the original PC AT bus specification; PCI/ISA PnP for devices is compliant with the Plug-and-Play standard whether designed for PCI or ISA bus architecture.

Ø The choice: PCI Device or Reserved.

PCI/VGA Palette SnoopPCI/VGA Palette Snoop

PCI/VGA Palette Snoop

PCI/VGA Palette SnoopPCI/VGA Palette Snoop

It determines whether the MPEG ISA/VESA VGA Cards can work with PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and PCI/ VGA Card worked, Enable this field. Otherwise, please Disable it.

Ø The choice: Enabled or Disabled.

INT Pin1~8 AssignmentINT Pin1~8 Assignment

INT Pin1~8 Assignment

INT Pin1~8 AssignmentINT Pin1~8 Assignment

Names the interrupt request(IRQ) line assigned to a device connected to the PCI interface on your system.

Ø The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.

- 73 -

PC Health Status

CPU Fan AutoGuardianCPU Fan AutoGuardian

CPU Fan AutoGuardian

CPU Fan AutoGuardianCPU Fan AutoGuardian

This SMART Bios enabled 3 phase Variable Fan Speed and CPU tem-

perature Control feature.

Ø The choice: Enabled or Disabled.

This feature is controlled via Bios, in which the CPU fan rotational

speed sensing /control is governed by CPU temperature setting

preselected in Bios.

By default, "CPU Fan AutoGuardian" feature under PC Health Status is

enabled.

Note: Note:

Note: Before manually modifying the CPU fan setting, please make

Note: Note: sure both fan connectors are plug into the correct fan connector

designations on the mainboard.

Our default for fan cooler is set to Fan 3.Our default for fan cooler is set to Fan 3.

Our default for fan cooler is set to Fan 3.

Our default for fan cooler is set to Fan 3.Our default for fan cooler is set to Fan 3.

FAN1

User Set CPU FanUser Set CPU Fan

User Set CPU Fan

User Set CPU FanUser Set CPU Fan

Enabled you to choose one specific fan for further setting.

Ø The choice: Fan1, Fan2, Fan3, or Fan1 & Fan3 .

Fan Speed Up When CPU TempFan Speed Up When CPU Temp

Fan Speed Up When CPU Temp

Fan Speed Up When CPU TempFan Speed Up When CPU Temp

Enabled 3 phase smart control to the Selected fan. This feature ranges

from 48 0C to 80 0C, in an increment of 4 0C. The default temperature is

at 72

Ø The choice: 48

C, 52 0C, 56 0C, 60 0C, 64 0C, 68 0C, 72 0C, 76 0C,

- 74 -

FA N 3

FAN2

Take our default Setting for example, 1st and 2nd phase Variable Fan

Speed and CPU temperature Control is as defined by "Fan Speed Up

When CPU Temp". If actual CPU temp (reported by BIOS) stays below

C then CPU fan speed will run at a

quiet modequiet mode

quiet mode (1st phase) of

quiet modequiet mode

approximately 2000 RPM.

But when the actual CPU temp goes above the pre-selected 72

temperature threshold, then CPU fan speed will automatically engage

normal mode normal mode

into

normal mode (2nd phase) of about 3000 RPM. Automatically by

normal mode normal mode the Smart Bios feature, this increase of fan rotation speed will effectively cool down the CPU temperature. And when the CPU temperature drops back below the 72

C temperature threshold, CPU fan speed will again automatically shift back to the quiet mode (1st phase) of about 2000 RPM in order to reduce fan noise level.

Fail-safe modeFail-safe mode

Fail-safe mode (3rd phase) Variable Fan Speed and CPU

Fail-safe modeFail-safe mode temperature Control is as predefined at 80 0C. Where in the event of system and CPU operating under extreme working conditions, and if CPU temperature is raised above 80

C then the Smart Bios will engage the CPU fan in Fail-safe mode to rotate at about 3500 RPM. Please note that the higher fan speed, the fan cooler will be become slightly noiseier in order to compensate for the increase in CPU temperature.

Warning: Warning:

Warning: It is Strongly recommended to disable CPU Fan

Warning: Warning: AutoGuardian feature, if you wish to use other fan cooler, allowing the fan to run at its default speed.

CPU VCore (Show current CPU VCore)CPU VCore (Show current CPU VCore)

CPU VCore (Show current CPU VCore)

CPU VCore (Show current CPU VCore)CPU VCore (Show current CPU VCore) VDDQVDDQ

VDDQ

VDDQVDDQ +3.3V+3.3V

+3.3V

+3.3V+3.3V +5V+5V

+5V

+5V+5V +12V+12V

+12V

+12V+12V

-12V-12V

-12V

-12V-12V

2.5V2.5V

2.5V

2.5V2.5V +5VSB+5VSB

+5VSB

+5VSB+5VSB Voltage BatteryVoltage Battery

Voltage Battery

Voltage BatteryVoltage Battery System Temperature (Show current system temperature)System Temperature (Show current system temperature)

System Temperature (Show current system temperature)

System Temperature (Show current system temperature)System Temperature (Show current system temperature) CPU Temperature (Show current CPU temperature)CPU Temperature (Show current CPU temperature)

CPU Temperature (Show current CPU temperature)

CPU Temperature (Show current CPU temperature)CPU Temperature (Show current CPU temperature) PWM Temperature (Show current PWM temperature)PWM Temperature (Show current PWM temperature)

PWM Temperature (Show current PWM temperature)

PWM Temperature (Show current PWM temperature)PWM Temperature (Show current PWM temperature) Fan1 Speed (Show current Fan1 Speed)Fan1 Speed (Show current Fan1 Speed)

Fan1 Speed (Show current Fan1 Speed)

Fan1 Speed (Show current Fan1 Speed)Fan1 Speed (Show current Fan1 Speed) Fan2 Speed (Show current Fan2 Speed)Fan2 Speed (Show current Fan2 Speed)

Fan2 Speed (Show current Fan2 Speed)

Fan2 Speed (Show current Fan2 Speed)Fan2 Speed (Show current Fan2 Speed) Fan3 Speed (Show current Fan3 Speed)Fan3 Speed (Show current Fan3 Speed)

Fan3 Speed (Show current Fan3 Speed)

Fan3 Speed (Show current Fan3 Speed)Fan3 Speed (Show current Fan3 Speed)

- 75 -

Frequency/Voltage Control

CPU Clock RatioCPU Clock Ratio

CPU Clock Ratio

CPU Clock RatioCPU Clock Ratio

This item allows you to adjust CPU Ratio. Min: 8 Max: 24 Ø Key in a DEC number: (Between Min and Max.)

Auto Detect PCI ClkAuto Detect PCI Clk

Auto Detect PCI Clk

Auto Detect PCI ClkAuto Detect PCI Clk

This item allows you to enable/disable auto detection DIMM/PCI Clock. Ø The choice: Enabled, or Disabled.

Spread SpectrumSpread Spectrum

Spread Spectrum

Spread SpectrumSpread Spectrum

This item allows you to enable/disable the spread spectrum modulation. Ø The choice: Enabled, or Disabled.

CPU ClockCPU Clock

CPU Clock

CPU ClockCPU Clock

This item allows the user to adjust CPU Host Clock. CPU FSB400 select range 100~132. CPU FSB533 select range 133~165. Ø Key in a DEC number: (Between Min and Max.)

- 76 -

Load Fail-Safe Defaults

When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to:

Pressing 'Y' loads the BIOS default values for the most stable, minimal performance system operations.

Load Optimized Defaults

When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to:

Load Fail-Safe Defaults (Y/N) ? NLoad Fail-Safe Defaults (Y/N) ? N

Load Fail-Safe Defaults (Y/N) ? N

Load Fail-Safe Defaults (Y/N) ? NLoad Fail-Safe Defaults (Y/N) ? N

Pressing 'Y' loads the default values that are factory-set for optimal performance system operation.

Load Optimized Defaults (Y/N) ? NLoad Optimized Defaults (Y/N) ? N

Load Optimized Defaults (Y/N) ? N

Load Optimized Defaults (Y/N) ? NLoad Optimized Defaults (Y/N) ? N

- 77 -

Set Password

This item is to set supervisor password. Please follow below steps.

New Password Setting :New Password Setting :

New Password Setting :

New Password Setting :New Password Setting :

1. While pressing <Enter> key to start setting password function, a

dialog box appears to ask you Enter password: .

2. Key in a new password now. However, the password can not be

over eight characters or numbers.

3. Then system will request you to confirm new password by asking

you to key in new password again.

4. Once the confirmation is completed, new code takes effect.

No Password Setting :No Password Setting :

No Password Setting :

No Password Setting :No Password Setting :

5. If you want to delete password, just press <Enter> key instead of

new password while password input is requested. And the other procedures are the same as above password setting.

If You Forget Password :If You Forget Password :

If You Forget Password :

If You Forget Password :If You Forget Password :

6. While being asked of password, you just forget it and you must

access the system. The only way is to turn off system and clear CMOS memory. Please take reference in page 27 for clear CMOS setting.

- 78 -

@ Save & Exit Setup

Pressing <Enter> on this item asks for confirmation:

Pressing "Y" stores the selections made in the menus of CMOS - a special section of memory that stays on after you turn your system off. The next time you boot your computer, the BIOS configures your system according to the Setup selections stored in CMOS. After saving the values the system is restarted again.

@ Exit Without Saving

Pressing <Enter> on this item asks for confirmation:

Save to CMOS and EXIT (Y/N)? YSave to CMOS and EXIT (Y/N)? Y

Save to CMOS and EXIT (Y/N)? Y

Save to CMOS and EXIT (Y/N)? YSave to CMOS and EXIT (Y/N)? Y

This allows you to exit from Setup without storing in CMOS any change. The previous selections remain in effect. This exits from the Setup utility and restarts your computer.

Quit without saving (Y/N)? YQuit without saving (Y/N)? Y

Quit without saving (Y/N)? Y

Quit without saving (Y/N)? YQuit without saving (Y/N)? Y

- 79 -

Shuttle FB51 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual