Shuttle CXP01 User Manual
Product Specifications
w w w . s h u t t l e . e u
Shuttle C o m p u t e r H a n d e l s G m b H
Fr it z- St ras sma nn-S tr . 5
25 337 El msh or n | Ge r ma n y
Te l. +4 9 ( 0 ) 412 1 -4 7 6 8 6 0
Fax +49 (0 ) 4 1 21 -47 69 00
sa les @sh ut tle .eu
Page 1 3 0 April 2018
© 2018 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice
. Pictures for illustration purposes only.
CXP01 – Cable for external push button
switch
Some Shuttle XP Cs ha ve a handy connector at t he ba ck panel to
connect an external pow er button. In case t he XPC is installed in a
scenario where it cannot be accessed directly, be it VESAmounted or otherwise remotely installed, it can still be powered on
or off conveniently by using an ext ernal push button switch. Shutt le
therefore provides a 2-metre c able with fitting connections that
only requires a push button switch.
Feature Highlights
Cable
Shielded, industry-standard cable
Length: ca. 2 metres
Outer diameter: 4.5 mm
Two-pole cable: 2x 0.25 mm²
Colo ur: B lack
Connector
Dual header connector , 2.54 mm pitch
Two female crimp contact pins, tin-plated
Required
push button
switch
The cable provides tin-plated leads for a
push button switch of your choice.
The connection to the external power
button can be screw-type or soldering.
Compat ibility
The cable can be used with the following
Shuttle XPC models: XH310 , XH310V,
DS61, DS81, DS81L, DH110, DH110SE,
DH170, DQ170, DH270, DH310, DH370,
DS47, DS407, DS407T, DS437, DS437T,
DS57U Series, DS67U Series, DS68U, DS77U
Series, DX30, DL10 J
Shuttle XPC Accessory
CXP01
Length: 2 m
Connector for the push button
switch at the back panel of the XPC.
Images for illustration only.
Note: Push button switch not included
(4) Power Button
(3) Ground
+5V voltage (2)
Clear CMOS (1)
Loading...