Shure WCB6LT Users Manual

WCB6

LAVALIER MICROPHONE

Incredibly Small

Description:

Only one tenth of an inch (2.5mm) in diam eter, the
WCB6 out performs microphones many times it’s
size. The WCB6 features replaceable protective
caps that can change it’s frequency response to
match your application. Designed to survive, the
WCB6 is highly resistant to moisture, makeup and
other hazards found in a production environment.

Features:

Easily Hidden

Smaller than the cable of other l avaliers, the WCB6
is effectively hidden when it’s in plain sight. For
example choose a pr otective cap near the color of a
shirt and poke the W CB6 out through a bu ttonhole.
Tape the cable to the b ack of the shirt to secur e it
and you’re done. Say goodbye to the hassle and
degraded sound quality you get burying mics under
clothing!

Makeup and Sweat Resistant

Built to withstand perspiration and makeup, the
WCB6 will even survive an overnight soak in your
favorite cola beverage! The outer screen in the
WCB6’s replaceable cap stops makeup and sweat
before it enters the m ic element. If it clogs you can
simply remove the cap for cleaning or replacement.

Countryman Associates, Inc. 417 Stanford Ave. Redwood City, CA 94063-3422

Phone:[phone] or [phone] Fax: [phone] Email: [e-mail] Web: www.countryman.com

Specifications:

Compatibility:

Directional Pattern:

Frequency Response:

Sensitivity (10k ohm load):

Equivalent Acoustic Noise:

Maximum Sound Pressure:

Power Requirements:

Output Impedance:

Output Connector:

Dimensions:

Weight:

Supplied Accessories:

Designed to operate with most Shure
wireless transmitters
Omnidirectional
30Hz to 20kHz +- 3dB (flat cap)
6mV/Pa
24dB SPL A-Wt.
118 dB

1.5 to 3.5 volts under load@325uA
2k ohms
4-Pin mini connector (TA4F)
.1" x .15" (2.5mm x 3.8mm)
.002 oz (.06 g)
Carrying case, tie clip, wind screen
and set of 3 protective caps