Shure SOUND ISOLATING SE210 User Manual

SE210

Sound Isolating™ Earphones

Combining Hi-Definition
MicroSpeakers and a stylish sound
isolating design to deliver full
range audio free from background
noise, the Shure SE210 is an

ideal portable listening device
upgrade. An included modular

cable and interchangeable Sound

Isolating™ sleeves provide a

comfortable, personalized fit.

The carrying case further

enhances the portability

of these lightweight

earphones.

©2006, Shure Incorporated
27EN3243 (Rev. 2)

Printed in U.S.A.

To replace sleeve, carefully remove old one and slide new sleeve over nozzle
barb. If any part of the nozzle is exposed, sleeve is not properly installed.
Replace sleeves if they do not grip the nozzle tightly

Tighten the cable and take up slack by raising the cable sleeve.

Over the ear

in back

Over the ear

in front

Straight down

in front

Cable

Sleeve

Soft Foam Sleeves

When using the foam sleeves, compress the sleeve
between your fingers before inserting it into the ear canal.
Hold the earphone in place for about ten seconds while the
foam expands and creates a tight seal.

Soft Flex Sleeves

In small, medium, and large sizes.
Made from pliable rubber.

Triple-Flange Sleeves

If desired, the sleeve stem may be shortened. Use sharp
scissors to carefully trim the stem to the desired length.

Note: carefully slide sleeve over earphone nozzle barb for a secure grip.

Grasp the body of earphone and gently twist to remove.

Nozzle

Wire Loop

When cleaning, do not force any object through the earphone
nozzle! This will damage the earphone sound filter.

Cleaning
Tool

Note: Do not pull on cable to remove earphone.

Three suggested methods for wearing the earphones are
illustrated below.

WEARING THE EARPHONES

If the earphone seems to be lacking in low frequency response (bass),
check the tightness of the seal between the earphone and your ear, or
try one of the other sleeve options.

INSERTING THE EARPHONES

REMOVING THE EARPHONES

Your earphones come with a selection of sleeves. Make sure the sleeve
you choose is easy to insert into your ear, fits comfortably, and is easy
to remove from your ear.

CHOOSING AN EARPHONE SLEEVE

If you notice a change in sound quality, remove the sleeve and check
the nozzle of your earphone. If nozzle is blocked, clear obstruction by
using wire loop end of cleaning tool.

CLEANING THE EARPHONE NOZZLE

Nozzle Barb

Sleeve

Sleeve Over Barb

Warning: Do not push the earphone sleeve beyond the ear canal opening.

SHURE Incorporated http://www.shure.com

United States, Canada, Latin America, Caribbean:

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: [phone] U.S. Fax: [phone] Int’l Fax: [phone]

Europe, Middle East, Africa:

Shure Europe GmbH, Phone: [phone] Fax: [phone]

Asia, Pacific:

Shure Asia Limited, Phone: [phone] Fax: [phone]

SE210

Earphone

User Guide

Sensaphonics Hearing Conservation Toll Free: [phone]

660 N. Milwaukee Avenue In Chicago: [phone]

Chicago, IL 60622

e-mail: [e-mail]

www.sensaphonics.com

Transducer type Balanced-armature drivers

Sensitivity (at 1kHz) 114 dB SPL/mW

Impedance (at 1kHz) 26 W

DC Resistance 19 W

Frequency Range 25Hz - 18.5kHz

Input connector 3.5 mm (1/8 in.) gold-plated stereo plug

Net weight 29g (1 oz)

Operational temperature -18° C to 57° C (0° F to 135° F)

Storage temperature -29° C to 74° C (-20° F to 165° F)

TECHNICAL SPECIFICATIONS

Those who use earphones regularly for extended periods of time often
find custom-fit molded sleeves offer the best comfort and sound isolation.

Ask a Hearing Health Care Professional about creating custom molded
sleeves for your earphones. For more information, contact:

CUSTOM EARPHONE SLEEVES

Careful maintenance ensures a tight seal between the sleeve and
nozzle, improving sound quality and product safety.

MAINTENANCE



Keep the earphones and sleeves as clean and dry as possible.



To clean sleeves, remove them from earphones, gently rinse in
warm water and air dry. Foam sleeves require a longer drying
time. Inspect for damage and replace if necessary.

Ear sleeves must be completely dry before reusing.



Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.



Do not expose earphones to extreme temperatures.



Replace the sleeves if they do not fit properly.

ACCESSORIES

For information about earphone accessories (listed below) and other
Shure products visit: www.shure.com

• Replacement Sleeves • Extension Cables

• Carrying Cases • Push To Hear (PTH)

• Adapters • Volume Control

CERTIFICATION

Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.

Meets applicable tests and performance criteria in
European Standard EN 55103 (1996) Parts 1 and 2, for
residential (E1) and light industrial (E2) environments.

• Deluxe Carrying Case

• Fit Kit: contains soft foam, soft flex, and triple flange sleeves
plus cleaning tool

• Stereo Extension Cable - 3 ft. (91 cm)

FURNISHED ACCESSORIES