Product Specifications
SM94 Cardioid Condenser Microphone
Overview
The SM94 is a rugged, versatile flat-response cardioid condenser microphone, designed with a frequency response free of either presence peaks or
low-end rolloffs, for use with live amplified and acoustic instruments. Additionally, the SM94 can be powered from one AA battery or phantom power,
for remote recording applications and environmental conditions.
Features
• A sensitive mic with a wide, flat response ideal for live amplified and acoustic instruments.
• Extremely well-suited for reproduction of stringed instruments, woodwinds and cymbals
• AA battery or phantom power
• Internal shock mount
• Wide dynamic range
• Smooth, flat frequency response
• Uniform Cardioid condenser
• Frequency response: 40 to 16,000 Hz
Available Models
SM94 Includes Stand Adapter and Zippered Pouch
Specifications
Type Condenser
Frequency Response 40 to 16,000 Hz
Polar Pattern Cardioid
Sensitivity (at 1,000 Hz)
Impedance Rated at 150 Ω; 200 Ω actual
Output Clipping Level
(1 kHz, 3% THD)
Total Harmonic Distortion < 0.25% (130 dB SPL at 250 Hz into 800 Ω load)
Maximum SPL 800 Ω Load: 141 dB (phantom), 123 dB (battery)
Hum Pickup –3 dB equivalent SPL in a 1 millioersted field (60 Hz)
Output Noise (equivalent sound pressure levels;
measured with true rms voltmeter)
Dynamic Range 119 dB (phantom); 101 dB (battery) (maximum SPL, 2000–Ω load, to A–weighted noise level)
Signal-to-Noise Ratio 72 dB (IEC 651)* at 94 dB SPL
Overvoltage Protection
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Power
Battery Operation
Connector XLR professional audio 3-Pin
Case Steel and brass construction with gray finish and stainless steel mesh grille
Net Weight 250 grams (8.8 oz) less battery
Open Circuit Voltage: –49 dBV/Pa (3.5 mV) (phantom)
–50 dBV/Pa (3.2 mV) (battery) (1 Pa = 94dB SPL)
800-Ω Load–14 dBV (0.63 V) (phantom), 1% THD;
–23 dBV (0.71 V) (battery), 3% THD
22 dB typical, A-weighted
25 dB typical, weighted per DIN 45 505
Maximum External Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52Vdc
Reverse polarity protected to 75 Vdc
Supply Voltage: 11 to 52 Vdc, (+) pins 2 and 3
Current Drain: 1.0 to 1.2 mA max. at 52 Vdc
Type: 1.5 V alkaline, AA size (NEDA 15A)
Life: Up to 5,000 hours with fresh battery
SM94
Optional Accessories and Replacement Parts
A25D Microphone Clip A15AS Switch-Selectable Attenuator A53M Isolation Mount
A3WS Microphone Windscreen
Polar pattern
250 Hz
500 Hz
1000 Hz
2500 Hz
6300 Hz
10000 Hz
www.shure.com ©2015 Shure Incorporated
Frequency response
+20
+10
0
dB
–10
–20
98765432 98765432
20 50 100 1000 10000 20000
Hz