Product Specifications
SM87A Includes Stand Adapter and Zippered Pouch
SM87A Supercardioid Condenser Microphone
Overview
The SM87A is a rugged, lightweight supercardioid condenser microphone with superior rejection for clear reproduction of warm and accurate lead
vocals. Designed with a three-stage shock mount for low self-noise, and a tight polar pattern that excludes unwanted sound sources, the SM87A is an
excellent choice for sound reinforcement in noisy or reverberant environments.
Features
• Highly directional supercardioid pickup pattern
• Controlled low-frequency roll-off
• Very low RF and magnetic hum susceptibility
• Minimally affected by varying load impedance
• Built-in wind and pop filter
• Transducer element shock mounted
• Rugged construction for outstanding reliability
• Field-usable over a wide range of temperature and humidity conditions
• Accepts a wide variety of phantom power sources, including DIN 45 596 voltages of 11 and 52 Vdc
Available Models
Specifications
Type Condenser
Frequency Response 50 to 20,000 Hz
Polar Pattern Supercardioid
Sensitivity (at 1,000 Hz) Open Circuit Voltage: –52.5 dBV/Pa (2.4 mV) (1 Pa = 94 dB SPL)
Impedance
Output Clipping Level 1000 Ohm Load at 1,000 Hz: –6 dBV (0.5 V)
Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load)
Self-Noise 24 dB typical, A-weighted
Dynamic Range (1000 ohms) 116.5 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Power Requirements 11 to 52 vdc, 1.2 mA
Case Aluminum construction with steel grille and satin black finish
Connector Three-pin professional audio connector (male XLR type)
Net Weight 200 grams (7 oz)
Dimensions 192 mm (7-9/16 in.) L x 50 mm (2 in.) W at the widest point
Rated at 150 ohms (100 ohms actual ±20%)
Recommended minimum load impedance: 800 ohms
26 dB typical, weighted per DIN 45 405
70 dB at 94 dB SPL (IEC 651)
S/N ratio is difference between 94 dB SPL and equivalent SPL of self– noise A-weighted
SM87A
Optional Accessories and Replacement Parts
A25D Microphone Clip RK128 Replacement Cartridge and Shock Mount A55M, A55HM Isolation Mount
A85WS Microphone Windscreen RK214G Replacement Screen and Grille
Polar pattern
100 Hz
500 Hz, 1000 Hz
3150 Hz
610000 Hz
Frequency response
+20
+10
0
dB
–10
–20
20 50 100 1000 10000 20000
9876543298765432
Hz
www.shure.com ©2015 Shure Incorporated