Shure SM59 User Guide

THE SOUND OF THE PROFESSIONALS

GENERAL

The Shure Model SM59 is a high-quality, unidirectional dynamic microphone designed for professional applications in sound reinforcement, broadcasting and recording. The SM59 has a wide-range frequency response and a unique cartridge shock mount design which minimizes handling noise and maximizes vibration cancellation. A special “pop” filter protects against explosive breath sounds. A slim lower case, balanced weight, and sleek appearance combine to make the SM59 especially suitable for stage use. The SM59 is a

lightweight, rugged unit of aluminum, zinc and stainless steel construction, finished in matte champagne enamel. A microphone swivel adapter is provided.

Model SM59-LC is supplied without a cable.

PROFESSIONAL PRODUCTS

Model SM59 Features:

n Wide-range, smooth frequency response; provides

clean, natural reproduction of voice and music

Special mechano-pneumatic shock mount virtually eliminates normal handling noise and pickup of floor/stand vibrations

Wire-mesh screen with built-in filter provides ex-

cellent “pop” protection

n Built-in hum-bucking coil for maximum electro-

magnetic hum cancellation

Highly effective cardioid pickup minimizes background noise and undesirable location acoustics

Versatile-for use in the hand or on a stand- indoors or outdoors

Smooth, sleek styling and lightweight, balanced case for excellent appearance and ease of use

SPECIFICATIONS

Type

Dynamic

Frequency Response

50 to 15,000 Hz (see Figure 1)

TYPICAL FREQUENCY RESPONSE

FIGURE 1

Polar Pattern

Cardioid (unidirectional) - uniform with frequency, symmetrical about axis (see Figure 2)

Rugged - provides years of dependable operation

with unchanging performance

The SM59 is a low-impedance microphone and is recommended for use when long cable lengths are required or under conditions of severe hum disturbance.

The permissible cable length is practically unlimited,

since neither response nor level is affected. If required,

the SM59 may be connected to a high-impedance mixer

input using a Shure A95UF Line Matching Transformer.

TYPICAL POLAR PATTERNS

FIGURE 2

Impedance

Microphone rating impedance is 150 ohms (160 ohms

actual) for connection to microphone inputs rated at

19 to 300 ohms

Printed in U.S.A.

Patent No. 3,989,905

Output Level

(at 1,000 Hz)

Open Circuit Voltage . . . . , . . . . . . . -83 dB (.07 mV)

(0 dB = 1 volt per microbar)

Power Level . . . . . . . . . . . . . . . . . . . -61 dB

(0 dB = 1 milliwatt with 10 microbars)

Hum Sensitivity

12.5 dB typical equivalent SPL in a 1 millioersted field

Phasing

Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of plug element

Swivel Adapter

Positive action, adjustable through 90° from vertical to horizontal, permits easy removal for hand-held use, suitable for mounting on stand with 5/8”-27 thread

Operating Temperature Range

-29° to 74°C ( -20° to 165°F)

Case

Aluminum with champagne enamel finish

Dimensions

See Figure 3

OVERALL DIMENSIONS

FIGURE 3

Net Weight

215 grams (7.6 oz)

Packaged Weight

1.1 kg (2 lb, 7 oz)

FURNISHED ACCESSORY

Swivel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . A57D

REPLACEMENT PARTS

Grille Assembly Cartridge and Case Assembly

Plug Shell Assembly

Plug Element

........................

.................

.....................

............................

90CD2600

R100

90CE2600

90A1984

OPTIONAL ACCESSORIES

Windscreen

Desk Stand Line Matching Transformer Cable (7.6m-25 ft)

...........................

..................

..........................

A59WS-BR

S37A, S39A

A95UF

C25F

ARCHITECTS’ SPECIFICATIONS

The microphone shall be a moving coil (dynamic) type with a frequency response of 50 to 15,000 Hz. The unit shall have a cardioid polar characteristic. The cancellation at the sides shall be approximately 6 dB, and the cancellation at the rear shall be greater than 15 dB at 100 Hz and greater than 20 dB at 1000 Hz when measured with the front of the microphone two feet from the sound source. The microphone shall be low impedance with a rated impedance of 150 ohms for con-

nection to microphone inputs rated at 19 to 300 ohms.

The microphone output shall be -61 dB where 0 dB = 1

milliwatt with 10 microbars. The microphone shall be supplied with a swivel adapter, adjustable through 90° from vertical to horizontal, and suitable for mounting on a stand having a 5/8”-27 thread.

The overall dimensions of the microphone shall be 197 mm (7-25132 in.) in length and 41.4 mm (1-5/8 in.) in diameter.

The microphone shall be the Shure Model SM59 or

equivalent.

GUARANTEE

This Shure product is guaranteed in normal use to be

free from electrical and mechanical defects for a period of one year from date of purchase. Please retain proof of purchase date. This guarantee includes all parts and

labor. This guarantee is in lieu of any and all other

guarantees or warranties, express or implied, and there shall be no recovery for any consequential or incidental damages.

INTERNAL CONNECTIONS

FIGURE 4

SHIPPING INSTRUCTIONS

Carefully repack the unit, insure it, and return it prepaid to:

Shure Brothers Incorporated Attention: Service Department 222 Hartrey Avenue

Evanston, Illinois 60202-3696 If outside the United States, return the unit to your dealer or Authorized Shure Service Center for repair.

The unit will be returned to you prepaid.