![](/html/05/05cc/05cc003108536f4fab09aee532dfa2c64965aea98b6c4534ffaf4e05822de189/bg1.png)
Sound Isolating Earphones
SE530
Shure Sound Isolating™
Earphones with Triple
TruAcoustic MicroSpeakers
deliver unparalleled acoustic
accuracy. A tweeter and dual
woofers create an expansive
sound stage complete with fullbodied bass. In addition to an
ultra-premium industrial design,
the Shure SE530 includes
a carrying case, modular
cables, interchangeable
Sound IsolatingTM sleeves,
and adapters—providing a
comfortable,
personalized t
and maximum
portability.
©2006, Shure Incorporated
27AS3242 (Rev. 1)
Printed in U.S.A.
![](/html/05/05cc/05cc003108536f4fab09aee532dfa2c64965aea98b6c4534ffaf4e05822de189/bg2.png)
WEARING THE EARPHONES
Two suggested methods for wearing the earphones are illustrated below.
Over the ear
in back
Over the ear
in front
Tighten the cable and take up slack by raising the cable sleeve.
Cable
sleeve
![](/html/05/05cc/05cc003108536f4fab09aee532dfa2c64965aea98b6c4534ffaf4e05822de189/bg3.png)
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
To change earphone sleeve, twist and pull sleeve to remove it from the nozzle. Push
new sleeve onto nozzle until you feel it slide completely over barb. If any part of the
nozzle is exposed, sleeve is not properly installed. Replace sleeves if they do not grip
the nozzle tightly
Nozzle Barb Sleeve Sleeve Over Barb
english
![](/html/05/05cc/05cc003108536f4fab09aee532dfa2c64965aea98b6c4534ffaf4e05822de189/bg4.png)
REMOVING THE EARPHONES
Note: Do not pull on cable to remove earphone.
Grasp the body of earphone and gently twist to remove.