Shure R185 User Guide

REPLACEMENT

CARTRIDGE KITS

REPLACEMENT CARTRIDGE KITS
R183B, R183W, R184B, R184W, R185B, AND R185W

GENERAL

Use the enclosed replacement cartridge with any Microflex

microphone.

APPLICATIONS
R183 (Omnidirectional): Sound reinforcement, recording, or

remote monitoring applications. Low handling noise. Pickup angle
= 360°.

R184 (Supercardioid):

Sound reinforcement applications requir­ing high rejection of ambient noise and narrow pickup angle. Use of
windscreen highly recommended. Pickup angle (-3db) = 115

R185 (Cardioid): Sound reinforcement applications requiring

good rejection of ambient noise. Use of windscreen highly recom­mended. Pickup angle (-3db) = 130°.

(B=Black; W=White)

CHANGING CARTRIDGES

Simply unscrew the cartridge from the microphone base and re-

place it.

®

°

.

CARTRIDGE

CABLE

BODY

REMOVING A MICROPHONE CARTRIDGE

FIGURE 1

CHANGING CARTRIDGES IN MX300 SERIES
BOUNDARY MICROPHONES

Remove the top grille and unscrew the cartridge retaining brack­et. Lift the adapter housing to replace the cartridge. See the users
guide that accompanied the microphone for details.

ADAPTER HOUSING

CARTRIDGE

BRACKET

CARTRIDGE REPLACEMENT

FIGURE 2

For additional technical assistance, phone Shure at
1-847-600-8440. In Europe, phone [phone].

Trademark Notices: SHURE, the Shure logo, and
MICROFLEX are registered trademarks of Shure Incorporated.

©2005 Shure Incorporated
27C2933 (Rev. 4)

Printed in U.S.A.Printed in U.S.A.