Shure R176 Quick Start Guide

for Model BETA 58A

27C2921 (Rev. 6)

for Shure Model BETA 58A supercardioid dynamic micro-

To install the R176 replacement cartridge in the BETA 58A,

setscrew counter-clockwise and remove the XLR

tridge from pins 2 and 3 of the XLR connector.

snap-ring pliers. Insert both needles of the pliers

so that the ring compresses slightly, then remove

the ring.

the cartridge and case.

setscrew clockwise to secure the connector to the

6.

FIGURE 1

FIGURE

2

CARTRIDGE

LEADS

SCREEN AND

GRILLE ASSEMBLY

RETAINING

RING

1

2

3

BLUE

GREEN

RED

YELLOW

XLR CONNECTOR

XLR SETSCREW

TIGHTEN

LOOSEN

SHURE Incorporated http://www.shure.com

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Shure Europe GmbH, Phone: [phone] Fax: [phone]

Asia, Pacific:

Shure Asia Limited, Phone: [phone] Fax: [phone]