Shure R175 User's Guide

Model BETA 52

27C2920 (Rev. 5)

CARTRIDGE

LEADS

SCREEN AND

GRILLE ASSEMBLY

CASE

CIRCUIT BOARD

(TOPSIDE DOWN)

GND

22

2

1/4w

15mH

22 F

16V

22 F

16V

+
–

+

–

1

2

3

BLUE

GREEN

RED

YELLOW

GREEN

RED

%

Ω

µ

µ

The Shure Model R175 is a direct replacement cartridge

for the Shure Model BETA 52 supercardioid dynamic instru-

the same high–quality performance as the original cartridge.

To install the R175 replacement cartridge in the BETA 52, proceed

as follows:

wires of the old cartridge from the circuit board.

2.

the YELLOW lead wire goes to contact W1, the GREEN

down, so the board slides into the grooves at the back of

the case.

to the case with the screw from Step 3.

around the back end of the cartridge to take up some of

the excess slack.

on top of the case. Be careful not to pinch the lead wires

Attach the screen and grille assembly.

5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Asia, Pacific: