Shure PGA58-XLR-E Product Data Sheet

Product Speciﬁcations

PGA58 Cardioid Dynamic Vocal Microphone

Overview

The PGA58 Dynamic Vocal Microphone is a professional quality microphone featuring highly durable design and construction that delivers excellent sound. Ideal for use in lead and backup vocal performance applications, the PGA58 comes with an on/off switch, swivel adapter, carrying pouch and choice of XLR cable, QTR ( ¼") cable or without cable.

Features

• Tailored microphone cartridge design for natural clarity in the frequency range of vocal performance

• Cardioid polar pattern picks up audio from the source while rejecting unwanted noise

• Updated industrial design with black metallic ﬁnish and grille for unobtrusive visual presence

• Available with and without cables for ﬂexibility in gear choice –15 ft (4.6 m) XLR-XLR cable –15 ft (4.6 m) XLR-QTR cable –Also available without cable

• On/Off switch for discrete control of microphone operation

• Stand adapter for mounting to a microphone stand

• Zipper pouch included for additional protection during storage or transport

• Legendary Shure quality design and construction for exceptional performance in rigorous environments

Product Specifications

Type Dynamic (moving coil)

Frequency Response 50 to 16,000 Hz

Polar Pattern Cardioid

Output Impedance 150 Ω

Sensitivity

at 1 kHz, open circuit voltage

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight 294 g (10.37 oz.)

Switch On/off switch

Connector Three-pin professional audio (XLR), male

Operating Temperature -20 to 165 °F (-29 to 74 °C)

Operating Humidity 0 to 95%

-55 dBV/Pa (1.79 mV)

1 Pa=94 dB SPL

PGA 58

Available SKUs

PGA58-LC Microphone, clip, stand adapter, and pouch (Less cable)

PGA58-XLR Microphone, clip, stand adapter, pouch and 15 ft (4.6 m) XLR-to-XLR cable

PGA58-QTR Microphone, clip, stand adapter, pouch and 15 ft (4.6 m) XLR-to-1/4" cable

PGA58-BTS Microphone, clip, stand adapter, pouch, boom microphone stand and 15 ft (4.6 m) XLR-to-XLR cable

Accessories

A25D Break-resistant microphone clip

A58WS Black foam windscreen

31A1856 5/8" to 3/8" thread adapter

C25J 25 ft (7.6 m) XLR-to-XLR cable

RPMP58G Replacement PGA58 black mesh grille

Polar Pattern Frequency Response