Shure PGA31 Specification Sheet

Product Speciﬁcations

-30

-25

-20

-15

-10

-5

20 100 1k 10k 20k

0.6 m (2 ft.) from sound source 1 cm (0.4 in) from sound source

PGA31 Performance Headset Condenser Microphone

Overview

The PGA31 performance headset microphone for general, speaking and performance use is a permanently-biased electret condenser microphone. Engineered to provide maximum versatility and reliable performance in a wide array of conditions at an affordable price, the PGA31 is compatible with any Shure wireless bodypack systems with TA4F (TQG) connectors. Available as an included option for many systems, it also makes a viable replacement option for use in existing systems. The wearable design offers improved comfort and a secure fit for hands-free operation in any situation, while the unidirectional (cardioid) pickup pattern provides excellent off-axis rejection for higher gain-before-feedback when using a stage monitor.

Features

• Wearable wireframe headset fits securely for multi-instrumentalists and active performers

• Permanently charged electret condenser element for detailed, crisp vocals

• Unidirectional (cardioid) polar pattern rejects unwanted noise for improved sound quality and higher gain-before-feedback

• Flexible gooseneck design and discrete adjustment options optimize microphone positioning for further source isolation

• TA4F (TQG) connector seamlessly integrates with existing Shure bodypack systems

• Also available with a wide variety of Shure wireless systems, renowned for ease of use and reliable performance

• Included windscreen tames plosive, breath and wind noise for clean and intelligble sound

• Tailored frequency response primed for great sound on vocals

• Legendary Shure precision engineering for durability and performance

Available Models

PGA31-TQG Headset Cardioid Condenser Microphone with Windscreen BLX1288/PGA31 BLX Dual-Channel Wireless Headset/Vocal Combo System BLX14/PGA31 BLX Wireless Headset System

PGXD14/PGA31 PGX-D Digital Wireless Headset System

GLXD14/PGA31 GLX-D Digital Wireless Headset System

SVX14/PGA31 SVX Wireless Headset System

Specifications

Type Electret Condenser Frequency Response 60 to 20,000 Hz Polar Pattern Unidirectional (Cardioid) Output Impedance

@ 1 kHz, typical

Audio Output Level -50 dBV/Pa Signal-To-Noise Ratio

@ 1 kHz

Maximum SPL

1000 Ω load, @ 3% THD

Dynamic Range

@ 1 kHz, 1000 Ω load

Equivalent Output Noise

Typical, A-Weighted

[1]

Power Requirements +5 V DC (nominal), 10 V maximum (DC bias) Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 Cable 1.3 m (50 in.) Connector TA4F Net Weight 45 g (1.59 oz.)

[1]

Measurements taken using RK100PK preamp set @ 0 dB using 8k bias resistor.

* All speciﬁcations measured with a 48 VDC phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.

600 Ω

66 dB

145.0 dB

117.0 dB

28 dB

PGA31

Optional Accessories

RK377 Replacement kit with clip + 2 foam windscreens

Frequency Response

www.shure.com