Shure PGA27 Specification Sheet

Product Speciﬁcations

PGA27 Large Diaphragm Side-Address Condenser Microphone

Overview

Designed with a tailored frequency response for superior reproduction, the PGA27 side-address condenser microphone features a large cardioid diaphragm, highly durable design and construction and a high SPL threshold for clearly capturing a wide variety of vocal, acoustic, and ampliﬁed sources. Versatile for use in both recording and live performance. Phantom power required.

Features

• Large diaphragm cartridge provides wider dynamic range for clear highs and strong lows

• Cardioid polar pattern picks up audio from the source while rejecting unwanted noise

• Updated industrial design with black metallic ﬁnish and grille for unobtrusive visual presence

• High-pass ﬁlter for additional control of unwanted low-end signal

• -15dB switchable attenuator for additional SPL versatility

• Shock mount included for additional set-up stability and minimization of unwanted mechanical noise

• Padded zipper case included for additional protection during storage or transport

• Legendary Shure quality design and construction for exceptional performance in rigorous environments

Product Specifications

Type Electret condenser

Frequency Response 20 to 20,000 Hz

Polar Pattern Cardioid

Output Impedance 115 Ω

Sensitivity

at 1 kHz, open circuit voltage

Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight 453 g (16 oz.)

Connector Three-pin professional audio (XLR), male

Operating Temperature -20 to 165 °F (-29 to 74 °C)

Operating Humidity

Relative

-35 dBV/Pa (17.8 mV)

1 Pa=94 dB SPL

0 to 95%

PGA 27

Available SKUs

PGA27-LC Microphone, shock mount, stand adapter and pouch

Accessories

A27SM ShureLock® Rubber Isolated Shock Mount

PS-6 Popper Stopper

A32WS Black foam windscreen

31A1856 5/8" to 3/8" thread adapter

C25J 25 ft (7.6 m) XLR-to-XLR cable

Polar Pattern Frequency Response

Pop Filter with Adjustible Gooseneck and Stand Clamp