Shure PG42USB User Manual

Product Speciﬁcations

Frequency Response 20 to 20,000 Hz Polar Pattern Cardioid Max SPL

(20 Hz to 20 kHz, <1% THD)

PAD OFF: 130 dB SPL PAD ON: 145 dB SPL

Max SPL corresponds to full-scale digital output at minimum analog gain setting Switch Attenuator: 15 dB Power Requirements USB-powered, 500 mA maximum Digital Noise Floor

(20 Hz to 20 kHz, A-weighted)

Minimum MIC GAIN setting: −81 dB

Maximum MIC GAIN setting: −78 dB Sampling Rate up to 48 kHz Bit Depth 16 bit Peak Signal Indicator

(Tri-color)

OFF: −30 dB FS

Green: −30 to −12 dB FS

Yellow: −12 to 0 dB FS

Red: >0 (digital converter clipped) Sampling Rate up to 48 kHz Adjustable Gain Range 34 dB Headphone Output 3.5 mm (1/8 inch)

PG42USB

Includes a 9.8 ft (3m) USB Cable, Shock Mount and a Carrying Case

PG42USB Side Address Condenser Microphone

Overview

Specifically engineered for lead vocal reproduction, the PG42USB side-address condenser microphone easily plugs into a computer USB port for the convenience of digital recording The PG42USB features a large cardioid diaphragm tailored with high sensitivity to clearly reproduce refined performances with guaranteed “Plug and Play” Shure quality.

Features

USB Plug and Play connectivity allows the convenience of digital recording, anywhere your computer can go.• Compatible with Windows Vista, XP, 2000, and Mac OS X (10.1 or later)• Integrated pre-amp with Microphone Gain Control allows control of input signal strength• Zero Latency Monitoring for real-time playback and multi-tracking without disorientation• Headphone jack for monitoring with 1/8” connectivity • Monitor Mix Control for blending microphone and playback audio • 16 bit, up to 48 kHz sample rate for better-than-CD quality audio•

Available Models

Specifications

PG42USB

Polar Pattern

Measured at 1000 Hz

www.shure.com

Frequency Response