Shure M95G User Guide
222
HARTREY
AVE..
EVANSTON.
IL. 60204 U.S.A.
AREACODE
312
866
2700
.
CABLE
TWX: 910-231.0048 TELEX: 72-4381
SHLREUICRO
THE PREMIER
*ODEL
FAMILY OF
M95G
STEREO SOUND REPRODUCERS
STEREO
PHONOGRAPH
DYNETIC@
CARTRIDGE
CARTRIDGE AND STYLI SPECIFICATIONS
N95G
15 mlcrons Gray
(.0006
in.)
Spherical
N95-3t
63
microns Green
(.0025
in.)
Spher~cal
toptional
'Output voltages glven for stereo cut record. For MONO cut record,
output voltage at both left channel and right channel cartridge
will be
"Tracking forces greater than
NET WEIGHT:
INDUCTANCE:
DC RESISTANCE:
OPTIMUM LOAD:
farads total capacitance per channel. (Load resistance can be as high as
100,000
ohms and total capacitance can
only minor
the tone arm wiring, phono cables, and the amplifier input circuit.
FOUR-CHANNEL: This
four-channel matrix systems.
MONOPHONIC OPERATION: Set function switch on amplifier to "MONO"
"A+B." If amplifier
or
right channels in parallel
CONNECTIONS
ground (usually green) to "RG." Left "hot" lead (usually white) to
left ground (usually blue) to "LG." If metal head is causing ground loop
hum, remove the ground tab. The inetallic cartridge shield is disconnected
from the right channel
CAUTION: Do not make solder
connection to cartridge terminals.
STYLUS REPLACEMENT (see Fig-
2):
ure
stylus and gently pull forward
out of cartridge. Insert replace-
ment stylus into socket and press
until housing mates with cartridge
case.
MOUNTING
mounting centers]:
Mounting screws are provided.
1.
Remove stylus guard and stylus
(see Stylus Replacement).
2.
Connect leads to cartridge (see
Figure
3.
Lay cartridge in shell and align
mounting holes on side of cartridge with holes or threads in
shell. Follow turntable
facturer's instructions to mount
cartridge in tone arm or plug-in
shell.
4.
Reinsert stylus (see Stylus Re- FIGURE
placement).
RECOMMENDED STYLUS CLEANING: Use a camel's hair brush (No.
or smaller),
an
alcohol-d~st~lled water solution. Commercial cleaning solutions may cause
stylus damage
brush or wipe stylus
TO PRESERVE STYLUS LIFE:
1
Follow turntable or tone arm instructions when adjusting antiskating
force.
2
Do not handle the tone arm while it is in operation since this may
cause the arm to sweep across the record.
3.
If it is necessary to manually place the tone arm in the record groove
while turntable is rotating, release it as soon as the stylus engages the
record groove.
4.
Correct improper set-down adjustment or malfunction of the turntable
changing mechanism to prevent the stylus from striking the edge of the
turntable or record. Do not stack more records than turntable manufacturer recommends.
5.
Take care to properly insert the stylus into the cartridge assembly and
the cartridge and shell assembly into the tone arm receptacle.
6.
Use proper vertical tracking force setting for each cartridge.
7.
Do not use badly warped, cracked or imperfect records.
8.
When dusting the turntable protect the stylus with the stylus guard.
SPECIAL NOTE: To
cartridge, be certain that any replacement stylus you buy bears the
tng certification on the package: "Thk Stereo Uynet~cD stylus is preclslon
manufactured by Shure Brothers Inc." AVOID INFERIOR IMITATIONS. THEY
WILL SERIOUSLY DEGRADE THE PERFORMANCE OF YOUR CARTRIDGE.
ALL GENUINE
BROTHERS INC. LOOK FOR THE NAME SHURE ON THE STYLUS GRIP.
For more information on your Shure stylus, write for booklet:
the Small World of
FULL ONE-YEAR WARRANTY: Shure Brothers lncorporated ("Shure"),
222
Hartrey Avenue,
product that it will be free, in normal use, of any
and
mater~als lor a per~od of one year irom date of purchase. You should
retain proof
damages. It th~s Shure product has any defects as described above, carefully repack the unit and return it prepaid to:
If you are not in the United States, return the unit to your dealer or
Authorized Service Center for repair. The unit will be repaired or replaced
and returned to you promptly, and if it cannot be repaired or replaced,
you may elect to receive a refund This warranty does not include stylus wear.
PATENT NOTICE: Cartridge and stylus manufactured under one or more
of the
iollowing U.S. patents:
Copyright
27A1262 (TD) Printed in U.S.A.
4.7
mV
20
to 25 dB
20,040
within
Hz 2 dB
Dark
78
rpm Stylus: Set amplifier to "MONO" or "A+B."
71%
of figures above.
6.3
650
aud~ble change.) Total capacitance includes the capacitances oi
:see Figure
Grasp molded housing of
L12.7
20
to
5.5
mV
grams
m~llihenries
1550
ohms
47,000
St~reo Dynetic@ cartridge is compatible with all
IS
gtound by the removal of the ground tab.
rnrn
- -
20,000
Hz
maxlmum indicated should not be used.
ohms resistance in parallel with
not equ~pped w~th this switch, connect left and
1):
Right "hot" lead (usually red) to "R," right
LEFT
MF;~;;M
(112
in.)
3/4
at
to
kHz
lv2
grams
1%
to
grams
FIGURE
1
be as low as
10,000
3
100
400
HZ
-
1,000
19 cm/sec
Hz - 29 cm/sec
Hz
-
18
at 1 gram
terminal5
400
to
500
p~cofarads with
RlnHT
BROUND
RIG~T
GROU~
1
1).
manu-
2
tr~mmed to approximately 6 mm
or corro5lon. Always brush stylus from back to iront; never
from front to back or side to side.
mainta~n the or~g~nal performance standards of your
"DYNETICC9" STYLI ARE MANUFACTURED BY SHURE
a
Stylus."
Evanston, Illinois
of date oi purchdse. Shure is not liable for any ronsequent~al
Shure Brothers lncorporated
Attent~on: Service Department
1501
West Shure Drive
Arlington Heights, Illinois
3,055,988, 3,077,521, 3,077,522,
1980,
Shure Brothers Inc.
(1/4
in.), dipped in alcohol or
60204,
warrants to the owner of this
defects in workmanship
60004
and
"A
Visit to
3,463,889.
cm/sec
pico-
"L,"
CHANNEL
TAB
CnlNNLL
2
follow-
size
Loading...