Shure M92 LT User Manual

MICROPHONES AND ELECTRONIC COMPONENTS

AREA CODE 3121866-2200 . CABLE: SHUREMICRO TWX:

910-231-W48

SPECIFICATIONS

Stylus: 10 Frequency Response: 20 to 20,000 Output Voltage (at 1,000 Channel Balance: Within Channel Separation (minimum): 20 dB at 1,000 Optimum Load: 47,000 ohms resistance in parallel with 200 to 300 picofarads total capacitance per

channel. Load resistance can be up to 70,000 ohrns with almost no audible change in frequency response. Total capacitance includes both tone arm wiring and amplifier input circuit.

Inductance: 700 millihenries

Resistance: 1550 ohms Tracking Force: 1.25 grams optimum; 1.5 grams maximum Net weight: Upgrade Replacement Stylus:

Dark Blue grip. STYLUS CLEANING

Use a soft brush with an alcohol-distilled water solution or Shure Stylus Cleaning Solution. (See

your dealer and ask for the Shure SK-I, Stylus Cleaning Kit.) Brush only from back to front as shown in Figure solutions may cause stylus damage.

STYLUS REPLACEMENT Place the Technics Ltnear Tracking arm in a venient posttion as follows. FIGURE

1. With the lid closed, use the "manual" mode to move the arm to approximately the center of its travel.

2. Make certain the cartridge is cued "up" (raised off the record), and press the Off-On switch "Off."

Raise the lid.

Replace the stylus as shown in Figure to touch or damage the shank or diamond tip.

18p (.0004 x ,0007 in.), biradial elliptical diamond tip. Tan grip.

Hz,

grams

1. Other commercial cleaning

5 cmlsec peak velociiy): 4.0 mV per channel

N94LT with 10 x 18p (.0004 x .0007 in.), biradial elliptical diamond tip.

Inc.

STYLUS

con-

Always hold the stylus only by the plastic grip, take care not

TELEX:

72-4m1

IT1

STYLUS REPLACEMENT

FIGURE

Printed

U.S.A.

To malntatn the or~g~nal performance standards of your cartr~dge, be certaln that any replacement stylus you buy bears tured by Shure Brother5 FORMANCE OF YOUR CARTRIDGE ALL GENUINE BROTHERS INC LOOK FOR THE NAME SHURE ON THE STYLUS

Shurr Brothers lncorporated ("Shure"), 222 Hartrey Avenue, tvanston, lll~no~s 60204, warrants to the owner of one year irom date of purchase You should retaln proof of date of purchase Shure 1s not llable for any consequentla1 damages If return Arl~ngton He~ghts, Illlno15 60004 If you are not In the Un~ted States, return the unlt to your dealer or Author~zrd Servtce Center for repalr Thr unlt w~ll be repalred or replaced and returned to you promptly, and ~f ~t cannot be repdlred or replaced, you may elect to recelve a refund T~IY warranty doe5 not Include stylus wear

PATENT NOTICE:

Patent? 3,055,988, 3,077,521, 3,077,522, 3,463,889. 4,270,758, 4,194,744, 4,275,888, D193.854, D19.3.934, D201.803, D235.070, D235.151, D235.352, D245.022, D245.433, D252.628, D254.004, D257.676, D255.898, D258.586, other patents pend~ng

the followtng crrt~f~cat~on on the package "Th15 Stereo DYNFTICm stylus

th~c product that rt wrll be free, In normal uce, of any defects 1n workrnanshtp and rnaterlals for a perlod oi

~t prepa~d to Shure Brothers lncorporated Attent~on Servtce Department 1501 West Shure Dr~ve

Inc"AV0lD INFERIOR IMITATIONS THEY WILL StKlOUSLY DECRAUF THE PER-

this

Shure product ha5 any deferts as dercr~bed above, carefully repack the untt and

All Shure Sty11 and Cartr~dges are manufactt~red under one or more of the follow~ng U S

SPECIAL NOTE

"DYNETIC@" STYLI ARF MANUFACTURtD BY SHURE

FULL ONE-YEAR WARRANTY

GRIP

preclslon manufac-

RECOMMANDATIONS POUR LE NETTOYAGE DE LA POINTE:

d'alcool pur ou dtlue Les I~qu~drc de nettoyage vendus dans le commerce peuvent endommager ou corroder

po~nte Brosser toujours d'arr~ere en avant

REMPLACEMENT DU DIAMANT:

su~t

comme 1 Le capot etant f~rme, ut~l~ser le mode "manuel" pour plarer le bras approx~mativement a ml-course 2 S'a5surer que le bray e5t en posltlon "up" (cellule non en contact avec le dlsque), et mettre le contacteur

d'al~mentat~on de la plattne sur "off"

Soulever le capot

Remplacer endomrnager

REMARQUE:

sur son emballage "Th~s Stereo Dynettca Stylus 1s preclslon manufactured by Shure Brothers Inc" EVITEZ LES IMITATIONS DE QUALITE INFERIEURE ELLES DFTRUIRONT LE RENDFMENT UF VOTRE CELLULE CHERCHEZ LE NOM DE SHURE SUR LE SUPPORT DE

GARANTIE TOTALE D'UN AN:

lll~no~s 60204, garantlt ce produ~t a son proprtetaire, en ut~l~satton normale, contre tous defauts de fabrlcation ou de materiaux, pendant une perlode d'un an a part~r de la date d'achat Conserver votre preuve d'achat Shure n'est responsable d'aucuns dommages me prec~se c1drs5us, remballez-le sotgneusrment et renvoyez-le en port paye

porated, Attention: Service Department, 1501 West Shure Drive, Arlington Heights, Illinois

n'etes pas aux U S A, renvoyez-le a votre revendeur ou au representant offtctel Shure, pour reparat~on Ce produ~t sera repare ou remplare raptdement S'll ne peut @tre repare ou remplace, vou~ pouvez opter pour un remboursement Cette

Ir d~amant comme la f~gure Ten~r le d~amant par le plast~que, prendre garde a ne pas toucher ou

le d~amant ou le tube porte potnte A55urez-vous que tout dlamant de remplacement que vous achetez porte la garantle sulvante

garantle ne couvre pas I'usure des pointes de lecture

Placer le bras de la plat~ne Techn~cs dans la pos~tlon adequate Operer

POINTE EN PLASTIQUE

Shure Brothers lncorporated ("Shure"), 222 Hartrey Avenue, Evanston,

~nd~rects SI ce produ~t Shure presente un defaut com-

Uttllrez une brosse douce, humectee

Shure Brothers Incor-

60004.

SI vous