Shure FD 6120 F Specification Sheet

FD 6120 F Front Plate

• Front plate for delegate conference unit

• Flush-mounted installation

• Loudspeaker

• Microphone and mute buttons

DIS Digital Conference Systems

FD 6120 F Front Plate

Description

The FD 6120 front plate unit is a flush mounted unit designed to be used in com­bination with the MU 4040 or MU 6040 D microphone units. The unit is especially
suited for installations where a flush mounted unit must take up minimal space with
a minimum of components. The remaining components are fitted into the MU and
can be mounted in a more spacious location.

The unit can be configured for use with the MU 4040 or MU 6040 D by moving a
jumper on the PCB on the back of the unit. The default position of the jumper is for
use with the MU 6040 D.

The flush mounted unit features a built-in loudspeaker that distributes the floor chan­nel. The loudspeaker automatically mutes when the microphone is turned on.

The unit also features a microphone and a mute button. The microphone button en­ables the user to activate/deactivate the microphone. The mute button enables the
user to mute his/her active microphone while the mute button is held down.

The FD 6120 can be used in combination with the gooseneck microphones GM
652x or GM 6622 or the boundary microphone BM 6620.

The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with
a 2 mm hex key. The lock is accessible from the small hole above the XLR socket.
Turn the hex key clockwise to enable the lock and insert the gooseneck microphone
into the XLR socket. Turn the hex key counterclockwise to disable the lock and re­move the gooseneck microphone.

The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert in
the plastic adaptor with the boundary microphone. The molex mini-connector fits the
microphone connector on the PCB.

The FD 6120 can be combined with any of the conference units from the DCS 6000
Digital Conference System.

Features

The FD 6120 F has the following standard features:

• Standard conference unit for delegates

• Fully digital audio transmission

• Daisy chain topology with loop-through connections or star
topology using junction boxes

• CAT 5e (or higher) F/UTP or U/FTP cabling

• Maximum 3800 conference units per system

• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)

• Support for three microphone interrupt modes enabling 'ping
pong' mode

• Auto off of microphones

• Lockable XLR gooseneck microphone connector

• A high-quality loudspeaker

• Microphone and mute buttons with LED indicators

• Single cable connection to the MU 6040 D

Specifications

How To Order

Electrical

Frequency range

(loudspeaker)

Power maximum

(loudspeaker)

150 Hz-15 kHz

3.0 W RMS

Interconnections

MU 6040 D 1 m integrated cable

Connector type HD 15P

Microphone connection 3-pin female XLR

Mechanical

Dimensions (H x W x D) 90 x 160 x 30 mm

Cut out dimensions (H x W)

Weight 200 g

Material Anodized aluminium

Temperature range 5° to 40° C

75 x 140 mm (corner radius
max. R3.0)

Color Black

Certifications

The DCS 6000 system conforms to standard IEC 60914.

Delegate front plate with loudspeaker. Requires

MU 6040 D.

Delegate mic unit for use with HM 4042 or FD front

panel

Drawing

FD 6120 F

MU 6040 D