Shure MU 6042D, FD 6012F, 6042D Quick Manual

DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: [phone], Fax: [phone], e-mail: [e-mail]

The MU 6042D is a fully digital DSP
microprocessor based microphone unit
designed for use together with DIS
standard/custom-made series of front
plates.

The MU 6042D is designed for instal­lation inside the conference furniture,
below tables or inside floor boxes where
space is limited.

The MU 6042D is automatically recog­nized and receives two unique addresses
in the system, one for each delegate.
Besides this, a connected PC running SW
6000 will recognize both delegates.

The MU 6042D is delivered in a shielded
metal mounting box.

The MU 6042D is connected to the unique
DIS digital communication bus - the DCS­LAN as any other DCS 6000 unit.

The MU 6042D features:

Connection for DIS high quality elec-

tret condenser microphones semi
gooseneck type DIS GM 44xx or hand

held type HM 4042.
All with lamp indication
Connection for DIS loudspeaker
Loudspeaker mutes when the micro-

phone is activated
Digital audio and control transmission

on STP/FTP Cat 5 cable using DIS

proprietary protocol gives unique

performance and high reliability

DCS 6000 Digital
Conference System
Conference Units

Dual Delegate Unit

MU 6042D

Data sheet no. 6.27b

Connection for front plates with

operating buttons, LED indicators,
loudspeaker and microphone.

Multiple Operating modes determined

by the DCS 6000 set-up.

FD 6012F

The front plates can feature microphone,
loudspeaker and two microphone ON/
OFF buttons, enabling two delegates to
share a microphone and loudspeaker and
each will have a microphone ON/OFF
button.

The standard front plate FD 6012 F
features gooseneck microphone, loud­speaker and two microphone ON/OFF
buttons.

Customized front plates (dimensions,
colour, texts on button etc.) are available
on request.

FD 6012F

DIS, Danish Interpretation Systems A/S, Vestre Teglgade 12, DK-2450 Copenhagen SV, Denmark, Tel.: [phone], Fax: [phone], e-mail: [e-mail]

Microphone connection:
Mic. type: DIS Electret Cardioid

HD15-Sub female socket

Switch Inputs: 2 x Microphone or

Request on/off

LED Outputs: 2 x Speak & Request

Microphone Lamp

Loudspeaker Output:

8 Ohm - 1W max.

Connections:

I/O for daisy chain connection with
digital STP/FTP Cat5 screened for
previous and next DCS 6000 series
conference units or CU 6011 Central
Unit.

Connector type: RJ-45,

screened with auto-termination

Audio section:

Freq. Response (mic. in to line out):

100 Hz - 15 kHz

THD: < 0,1%
S/N: > 90 dBA

Specifications

DCS 6000 Digital
Conference System
Conference Units

Data sheet no. 6.27a

Dimensions (WxHxD):

MU 6042D

W/o connectors: 115 x 26 x 122 mm

FD 6012F: 220 x 90 x 30 mm
Cut out = 200x80 mm (symmetrical

on vertical and horizontal axes)

Corner radius: 10 mm

Temperature Range: 5 º - 40 º C

Weight: 0,4 kg.

Power Requirements:

Supplied from CU 6011

Power Consumption:

2.5 W (typical) - inclusive
microphone and loudspeaker

Please refer to the CU 6011 User
Manual for specification of numbers
of units per chain.

Please refer to Data Sheet for CU
6011 for specifications of the DCS
6000 system.

The MU 6042D, the FD 6012F and
the DCS 6000 system conform to all
relevant standards - e.g. IEC 914, ISO
4043, ISO 2603

Dimensions

MU 6042D

How to order

Conference Units: Order no.

MU 6042D,
Dual delegate unit 15 31 58342

FD 6012 FHB Dual front plate unit, mic/
loudspeaker/2 x buttons 15 12 57502

Connection Cable for DCS
6000 components:

EC 6000-0,5 EC 6000-10
EC 6000-01 EC 6000-20
EC 6000-05 EC 6000 -50
0,5 m - 50 m. cables

FD 6012F

Data subject to change without notice in interest of
product improvements