Shure FC 6021 F Specification Sheet

FC 6021 F Front Plate

• Front plate for chairman conference unit

• Flush-mounted installation

• Delegate-off button

DIS Digital Conference Systems

FC 6021 F Front Plate

Description

The FC 6021 F front plate unit is a flush mounted unit designed to be used in com­bination with the MU 6040 C microphone units. The unit is especially suited for in­stallations where the flush mounted unit must take up minimal space with minimum
components. The remaining components are fitted into the MU that can be mounted
in a more spacious location.

The flush mounted unit features a microphone and a delegates off button. The
microphone button enables the user to activate/deactivate the microphone. The del­egates off button enables the user to turn off all active delegate microphones.

The FC 6021 F can be used in combination with the gooseneck microphone GM
652x or the boundary microphone BM 6620.

The gooseneck microphones GM 652x can be locked to the unit with a 2 mm hex
key. The lock is accessible from the small hole above the XLR socket. Turn the
hex key clockwise to enable the lock and insert the gooseneck microphone into the
XLR socket. Turn the hex key counter clockwise to disable the lock and remove the
gooseneck microphone.

The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert
in the plastic adaptor with the boundary microphone. The molex mini-connector fits
with the microphone connector on the PCB.

The FC 6021 F can be combined with any conference units from the DCS 6000
Digital Conference System.

Features

The FC 6021 F has the following standard features:

• Standard conference unit for chairmen

• Fully digital audio transmission

• Daisy chain topology with loop-through connections or star
topology using junction boxes

• CAT 5e (or higher) F/UTP or U/FTP cabling

• Maximum 3800 conference units per system

• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)

• Support for three microphone interrupt modes enabling 'ping
pong' mode

• Auto off of microphones

• Lockable XLR gooseneck microphone connector

• Microphone and delegate off buttons with LED indicators

• Single cable connection to the MU 6040 C

Specifications

How To Order

Interconnections

MU 6040 D 1 m integrated cable

Connector type HD 15P

Microphone connection 3-pin female XLR

Mechanical

Dimensions (H x W x D) 90 x 90 x 28 mm

Cut out dimensions (H x W)

Weight 100 g

Material Anodized aluminium

Temperature range 5° to 40° C

75 x 75 mm (important: corner
radius maximum R3.0)

Color Black

Certifications

The DCS 6000 system conforms to standard IEC 60914.

Chairman front plate. Requires MU 6040 C. FC 6021 F

Chairman mic unit for use with HM 4042 or FD

Drawing

front panel

MU 6040 C