Shure FC 6021 Datasheet

FC 6021 Front Plate Unit

• Chairman front plate

• Flush mounted installation

• Chairman operation

• Lockable XLR microphone connector

• Microphone button

• Delegates off button

DIS Digital Conference Systems

FC 6021 Front Plate Unit

Description

The FC 6021 front plate unit is a flush mounted unit designed to be used in com­bination with the MU 4040 or MU 6040 C microphone units. The unit is especially
suited for installations where the flush mounted unit must take up minimal space
with minimum components. The remaining components are fitted into the MU that
can be mounted in a more spacious location.

The unit can be configured for use with the MU 4040 or MU 6040 C by moving a
jumper on the PCB on the back of the unit. The default position of the jumper is for
use with the MU 6040 C.

The flush mounted unit features a microphone and a delegates off button. The
microphone button enables the user to activate/deactivate the microphone. The
delegates off button enables the user to turn off all active delegate microphones.

The FC 6021 can be used in combination with the gooseneck microphones GM
652x or GM 6622 or the boundary microphone BM 6620.

The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with
a 2 mm hex key. The lock is accessible from the small hole above the XLR socket.
Turn the hex key clockwise to enable the lock and insert the gooseneck micro­phone into the XLR socket. Turn the hex key counter clockwise to disable the lock
and remove the gooseneck microphone.

The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert
in the plastic adaptor with the boundary microphone. The molex mini-connector fits
with the microphone connector on the PCB.

The FC 6021 can be combined with any conference units from the DCS 6000
Digital Conference System.

Features

The FC 6021 has the following standard features:

• Standard conference unit for chairmen

• Fully digital audio transmission

• Daisy chain topology with loop-through connections or star
topology using junction boxes

• CAT 5e (or higher) F/UTP or U/FTP cabling

• Maximum 3800 conference units per system

• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)

• Support for three microphone interrupt modes enabling 'ping
pong' mode

• Auto off of microphones

• Lockable XLR gooseneck microphone connector

• Microphone and delegate off buttons with LED indicators

• Single cable connection to the MU 4040 or MU 6040 C

Data sheet DS-FC6021-c

Specifications

Interconnections

MU 4040 or MU 6040 C 1 m integrated cable

Connector type HD 15P

Microphone connection 3-pin female XLR

Mechanical

Dimensions (H x W x D) 90 x 90 x 28 mm

Cut out dimensions (H x W)

Weight 100 g

Material Anodized aluminium

Temperature range 5° to 40° C

Certifications

The DCS 6000 system conforms to standard IEC 60914.

75 x 75 mm (important: corner
radius maximum R3.0)

Color Black

Drawing

How To Order

Conference unit

FC 6021 15 11 57590

Accessories

MU 6040 C 15 31 58344

MU 4040 15 31 46002

Please note that gooseneck microphones GM 652x/6622, boundary micro­phones BM 6620 and microphone units MU 6040D/4040 must be ordered
separately.

Data subject to change without notice.