Shure CM 6080 F Specification Sheet
CM 6080 F Conference Unit
• Flush-mounted chairman conference unit
• Channel selector
• Loudspeaker
• Lockable XLR microphone connector
DIS Digital Conference Systems
CM 6080 F Conference Unit
Description
The CM 6080 F is a fully digital flush-mounted conference unit in the DIS DCS 6000
Digital Conference System.
The unit is designed as a discussion unit with channel selector functionality. It features a microphone button, a delegate off button, headphone jack, channel selector,
a loudspeaker and a lockable XLR microphone connector.
The microphone button enables the user to activate/deactivate the microphone. A
red LED indicates when the microphone is on.
The delegate off button enables the user to turn off all active delegate microphones.
A green LED indicates that the button is activated.
The floor channel is distributed through the built-in loudspeaker except when the
microphone is turned on. The user can also listen to the floor channel by inserting
headphones in the headphone jack and adjusting the volume with the volume buttons. Optionally, the channel selector can be used for listening to an interpretation
channel.
The CM 6080 F can be used in combination with the gooseneck microphones GM
652x or GM 6622 or the boundary microphone BM 6620.
The gooseneck microphones GM 652x or GM 6622 can be locked to the unit with
a 2 mm hex key. The lock is accessible from the small hole to the right of the XLR
socket. Turn the hex key clockwise to enable the lock and insert the gooseneck microphone into the XLR socket. Turn the hex key counterclockwise to disable the lock
and remove the gooseneck microphone.
The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert
in the plastic adaptor with the boundary microphone. The molex mini-connector fits
with the microphone connector on the PCB.
The CM 6080 F can be mixed with any conference units from the DCS 6000 Digital
Conference System.
Features
The CM 6080 F has the following standard features:
• Standard conference unit for chairmen
• Fully digital audio transmission
• Daisy chain topology with loop-through connections or star
topology using junction boxes
• CAT 5e (or higher) F/UTP or U/FTP cabling
• Maximum of 3800 conference units per system
• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)
• Support for three microphone interrupt modes enabling 'ping
pong' mode
• Auto off of microphones
• Lockable XLR gooseneck microphone connector
• One high-quality loudspeaker
• A channel selector supporting the floor channel and 31
interpretation channels
• One headphone jack
• A microphone button with LED indicator for speak
• A delegate off button with LED indicator for delegates off
Specifications
How To Order
Electrical
Frequency response (chan-
nel selector)
Frequency range
(loudspeaker)
Power consumption 3.5 W
Power maximum
(loudspeaker)
Signal-to-noise ratio > 90 dBA
Microphone connection 3-pin female XLR
Headphone connection
65 Hz-16 kHz
150 Hz-15 kHz
3.0 W RMS
THD < 0.1 %
3.5 mm jack female stereo
socket
Interconnections
DCS-LAN
Two RJ45 female sockets with
auto-termination
Mechanical
Mounting Flush mounting
Dimensions (H x W x D) 90 x 180 x 62.6 mm
Panel cut-out (H x W)
Weight 650 g
Material Anodized aluminium
Temperature range 5° to 40° C
85 x 157 mm (important: corner
radius maximum R3.0)
Color Black
Flushmount chairman conference unit. Includes
loudspeaker, channel selector
Drawing
CM 6080 F
Certifications
The DCS 6000 system conforms to standard IEC 60914.
Loading...