Shure BRH50M Specification Sheet

Product Speciﬁcations

BRH50M Premium Broadcast Headset

Overview

Dual-sided, supra-aural headset with lightweight on-camera design provides exceptional audio quality, comfort and durability for demanding media production applications. High performance dynamic microphone features a supercardioid polar pattern and frequency response optimized for natural, intelligible vocal reproduction. Microphone boom pivots 270 degrees for left or right side wear, and user-replaceable parts provide for a long product life.

Features

• Closed-back, supra-aural earcups with low-proﬁle, on-camera design.

• High performance dynamic microphone with supercardioid polar pattern and frequency response delivers natural, intelligible voice reproduction optimized for on-air broadcast.

• Fully adjustable headband for comfortable, ergonomic ﬁt

• Boom microphone pivots 270 degrees for precise positioning with left or right side wear

• Single side, detachable cable included with 3-pin XLR / 1/4" connectors. See table below for additional cable options.

• Legendary Shure durability designed under rigorous quality standards to withstand the demands of everyday, professional use

• User-replaceable ear pads and windscreen provided for long product life

Available SKUs

BRH50M

BRH50M-LC Dual-sided premium broadcast headset with dynamic microphone, without cable

Speciﬁcations

Net Weight (without cable) 208 g (7.4 oz.) Operating Temperature 18 to 60 °C (0 to 140 °F) Storage Tempterature −29 to 74 °C (−29 to 165 °F) Relative Humidity 0 to 95%

Microphone

Type Dynamic, neodymium magnet Polar Pattern Supercardioid Frequency Response 40 to 16,000 Hz Output Impedance 250 Ohms Sensitivity (@ 1 kHz, open circuit voltage) -60.0 dBV/Pa

Polarity Positive pressure on diaphragm produces positive voltage on pin 1 (red wire) with respect to pin 2 (black wire)

Headphone

Transducer Type Dynamic, Neodymium magnet Driver Size 40 mm Frequency Range 20 to 20,000 Hz Sensitivity (@ 1 kHz) 110 dB SPL/mW Impedance (@ 1 kHz) 300 Ohms Maximum Input Power 1000 mW

Dual-sided premium broadcast headset with dynamic microphone, detachable 7.5m cable (terminates to 3-pin XLR / 1/4" connectors)

1 Pa - 94 dB SPL

BRH50M Dual Sided Premium

Broadcast Headset

Accessories

BCAEC50 Replacement Ear Pads BCASCA-NXLR3QI

BCAWS2 Replacement Windscreen BCASCA-NXLR3QI-25

BCASCA-1

Detachable cable, unterminated (bare whip, 6.5 ft)

BCASCA-NXLR4

Detachable cable with Neutrik 3-pin XLR male connector and 1/4" stereo plug (7.5 ft)

25 ft detachable cable with Neutrik 3-pin XLR male connector and 1/4" stereo plug

Detachable cable with Neutrik 4-pin XLR male connector (7.5 ft)

BCASCA-NXLR4-FEM

BASCA-NXLR5

Polar Patterns Frequency Response

-5

-15 dB

-10 dB

-5 dB

500 Hz

1,000 Hz

-15 dB

-10 dB

-5 dB

4,000 Hz

8,000 Hz

-10

-15

-20

-25

-30 20 100 1k 10k 15k

0.4” (1.01 cm) from sound source

1.2” (3.05 cm) from sound source

6’ (1.83 m) from sound source

Detachable cable with Neutrik 4-pin XLR female connector (7.5 ft)

Detachable cable with Neutrik 5-pin XLR male connector (7.5 ft)