Shure BLX14RE/MX53-H8E, BLX14E/MX53-H8E, BLX1288E/MX53-H8E, BLX188E/MX53-H8E, BLX14E/MX53-K14 MX153 User Guide (en)

MX153 -- Earset Headworn Microphone

General Description

The Shure Microflex MX153 is a professional subminiature earset microphone ideal for speech and other applica
tions requiring low-profile discreet placement where improved gain before feedback over lavalier microphones is
desired. Delivering exceptional speech clarity, the MX153 is ideal for corporate presentations, houses of worship,
A/V conferencing and live sound reinforcement. Additionally, CommShield Technology offers superior RF immuni

ty from cellular devices and digital bodypack transmitters. Available in three color options and direct TA4F connec
tivity to Shure bodypacks, the MX153 provides outstanding clarity in an extremely comfortable, over the ear de

sign.

®

®

Features

• Subminiature, omnidirectional cartridge offers superior speech clarity and enhanced plosive protection with no
proximity effect

• Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters

• Ultra-lightweight, comfortable, flexible design is stable and easy to place over either ear

• CommShield Technology guards against interference from cellular RF devices and digital bodypack transmit

ters

• Kevlar reinforced, soft flex cable

• Matte black, tan, and cocoa color options available

• Includes protective storage pouch, 3 windscreens, and collar clip

®

®

Model Variations

MX153B/O-TQG Black

MX153T/O-TQG Tan

MX153C/O-TQG Cocoa

Windscreen

The furnished windscreen provides plosive and wind protection.

• Fit windscreen over cartridge.

• To remove, simply lift windscreen over capsule.

1/6

Shure Incorporated

Using With Other Bodypack Transmitters

When connecting the microphone to anything other than a Shure wireless bodypack, make sure the device pro

vides a regulated +5 V DC (130 µA minimum).

Optional XLR Compatibility

To connect the MX153 earset to an XLR microphone input, use the RK100PK preamplifier (see Optional Acces

sories).

Phantom Power

The RK100PK preamplifier requires phantom power and performs best with a 48 Vdc supply (IEC61938). Howev

er, it will operate with slightly decreased headroom and sensitivity with supplies as low as 11 Vdc.

Most modern mixers provide phantom power. You must use a balanced microphone cable: XLR-to-XLR or XLR­to-TRS.

RFI Filtering

This microphone features CommShield Technology for superior RF filtering. For best results in hostile RF envi
ronments, always use the RK100PK preamp (see Optional Accessories).

®

Wearing the Earset

Fit the earset over the ear with the ear support piece placed behind the earlobe. The wire extends over the ear to
the tip of the mouth. Adjust the earset with small bends. Do not bend the boom arm beyond 20°.

2/6

Specifications

Transducer Type

Electret Condenser

Polar Pattern

Shure Incorporated

Omnidirectional

Frequency Response

20 to 20,000 Hz

Output Impedance

N/A

Sensitivity

open circuit voltage, @ 1 kHz, typical

-41 dBV/Pa (9 mV/Pa)

Maximum SPL

1 kHz at 1% THD

[1]

[2]

2500 Ω load 107 dB SPL

1000 Ω load 107 dB SPL

Signal-To-Noise Ratio

[3]

60 dB

Dynamic Range

@ 1 kHz

2500 Ω load 73 dB

3/6

1000 Ω load 73 dB

Self Noise

equivalent SPL, A-weighted, typical

34 dB

Common Mode Rejection

20 to 20,000 Hz

N/A

Operating Temperature Range

-18°C (0°F) to 57°C (135°F)

Polarity

Shure Incorporated

Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1.

Power Requirements

+1–5 V DC (500 µA max.)

Weight

19.76 g

1 Pa=94 dB SPL

THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL

S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

4/6

Shure Incorporated

Accessories

Furnished Accessories

MX153 accessory kit (3 windscreens, 1 collar clip)
Black

MX153 accessory kit (3 windscreens, 1 collar clip) Tan RPM153T

MX153 accessory kit (3 windscreens, 1 collar clip) Co

coa

Storage pouch WA153

Optional Accessories

XLR Preamplifier RK100PK

RPM153B

RPM153C

Replacement Accessories

4-Pin Mini Connector (TA4F/TQG) WA330

5/6

Shure Incorporated

Certifications

Eligible to bear CE Marking. Conforms to European EMC Directive 2004/108/EC. Meets Harmonized Standards
EN55103-1:1996 and EN55103-2:1996, for residential (E1) and light industrial (E2) environments.

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: [phone]

Fax: [phone]

Email: [e-mail]

Note: Information in this guide is subject to change without notice. For additional information about this product,
please visit www.shure.com.

SHURE and MICROFLEX are registered trademarks of Shure Incorporat
ed. COMMSHIELD is a registered trademark of Shure Acquisition Hold

ings, Inc. KEVLAR is a registered trademark of E. I. du Pont de Nemours
and Company.

6/6