Shure Bluetooth Earphones User Manual

Shure Bluetooth Earphones

Shure Bluetooth earphones are designed for continued functionality with Bluetooth capable
devices. They feature a three button controls with in-line microphone for phone calls and voice
applications.

Bluetooth Pairing

1. Turn off the earphones. Press and hold center button on earphone remote until the LED

flashes blue and red.

2. From your audio source, select "Shure BT1."

3. LED turns blue when successfully paired.

Pairing Multiple Bluetooth Devices

1. Turn off the earphones. Press and hold center button on earphone remote until the LED

flashes blue and red.

2. From your audio source, select "Shure BT1."

3. LED turns blue when successfully paired.

To pair second device:

1. Press and hold the center button on the second device until the LED flashes blue and red.

2. Select the second device on your audio source.

3. LED turns blue on second device when successfully paired.

Pairing Bluetooth Device to a PC

If you are having difficulty pairing your BT1 earphones to your PC, you may need to update
your drivers. Here are two ways to update your computer driver via the Intel® website.

1. Manually: This requires that you locate your wireless adapter and then download the

specific driver update for that wireless adapter

2. Intel Update Utility: This requires you to download the update app, run the app and

allow it to scan your computer for required driver updates.

3. Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to

your PC user manual for more information.

Using the Bluetooth Remote

The Center Button

Power on

Press and hold

Power off

Press and hold, 5 seconds

Bluetooth pair

Press and hold, 10 seconds

Play/Pause

Click once

Answer/End a call

Click once

Decline a call

Press and hold, 3 seconds

Activate voice assistant

Phone on, press and hold, 3 seconds