![](/html/77/776f/776f8054589ac21d363f2a6ad7ce6d15984935dc9fa23da3b40493b7db269aae/bg1.png)
Beta 87C Condenser Microphone
Specification Sheet
BETA 87C
CARDIOID CONDENSER MICROPHONE
OVERVIEW
The Shure BETA 87C is a high output condenser microphone
that provides touring professionals with studio-quality sound.
Vocalists who use in-ear monitor systems such as the Shure
Personal Monitor System will appreciate how effectively
PSM
the BETA 87C rejects ambient sound from the rear of the microphone.
The BETA 87C maintains its cardioid pattern throughout its frequency range, ensuring maximum isolation from other sound
sources and high g ain b efore f eedback. Its warm, natural sound is
the result of an exceptionally smooth frequency response that in-
cludes a slight presence rise. A controlled low–frequency roll-off
compensates for proximity effect and prevents the “boomy“
sound often associated with close-up use.
The BETA 87C is an excellent choice for professional studio recording, yet it is built to withstand the r igors o f t ouring. I t maintains
its performance characteristics even at sound pressure levels as
high as 139 dB SPL. Plus, the cartridge is protected by a proven
shock mount system. A hardened steel mesh grille with a built-in
pop filter provides added protection.
FEATURES
S Smooth, wide frequency response with slight presence rise
S Cardioid polar pattern for maximum isolation
S Minimal off-axis tone coloration
S Superior gain before feedback.
S Low-frequency roll-off compensates for proximity effect
S Wide dynamic range (117 dB)
SPECIFICATIONS
Transducer Type
Condenser (electret bias)
Frequency Response
50 to 20,000 Hz
TYPICAL FREQUENCY RESPONSE
S Low distortion characteristics
S Very low susceptibility to RFI and electromagnetic hum
S Advanced cartridge shock-mount system absorbs mechanical
shocks and reduces handling noise
S Built-in pop filter reduces wind and breath sounds
S Shure ruggedness and reliability for years of trouble-free
performance
Polar Pattern
cardioid
TYPICAL POLAR PATTERN
![](/html/77/776f/776f8054589ac21d363f2a6ad7ce6d15984935dc9fa23da3b40493b7db269aae/bg2.png)
MODEL BETA 87C CONDENSER MICROPHONE
Specification Sheet
Output Impedance
Rated at 150 ohms (100 ohms actual ±20%)
Recommended minimum load impedance: 800 ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage –51 dBV/Pa (2 mV). . . . . . . . . . . . . . . .
(1 Pa = 94 dB SPL)
Output Clipping Level
1000 ohm Load
at 1,000 Hz –6 dBV (0.5 V). . . . . . . . . . . . . .
Maximum SPL
139 dB
at 1,000 Hz (0.25% THD, 1000 ohm load)
Self-Noise
22 dB typical, A-weighted
24 dB typical, weighted per DIN 45 405
(equivalent sound pressure level; measured with true rms voltmeter)
Dynamic Range
117 dB (maximum SPL to A-weighted noise level)
Hum Sensitivity
–5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)
Signal-to-Noise Ratio
72 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self–noise
A-weighted.
Polarity
Positive pressure on diaphragm produces positive voltage on
pin 2 relative to pin 3 of the output connector. See Figure 4.
Power
Phantom Supply Requirement 11 to 52 Vdc, positive . . . . .
at both pins 2 and 3
Current Drain 1.0 to 1.2 mA. . . . . . . . . . . . . . . . . . . . . . . . . . .
Connector
Three–pin (XLR) professional audio
Case
Aluminum construction with painted blue metallic finish, and
hardened steel grille with nickel satin chrome plating
Dimensions
See Figure 5
192 mm
9
/16 in.)
(7–
21 mm
53
/64 in.)
(
OVERALL DIMENSIONS
51 mm
(2 in.)
Net Weight
Net: 207 grams (7.6 oz)
Packaged: 565 grams (1.24 lbs)
Environmental Conditions
Operating: –18
Storage: –29
° to 60° C (0° to 135° F)(relative humidity <90%)
° to 74° C (–20° to 165° F) (relative humidity <80%)
BETA 87C BLOCK DIAGRAM
FURNISHED ACCESSORIES
Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Carrying/Storage Bag 26A13. . . . . . . . . . . . . . . . . . . . . . .
REPLACEMENT PARTS
Grille RK312. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Amplifier Assembly 90KF2600. . . . . . . . .
OPTIONAL ACCESSORIES
Phantom Power Supply PS1A. . . . . . . . . . . . . . . . . . . . . .
Isolation Mount A53M, A53HM. . . . . . . . . . . . . . . . . . . . .
Windscreen A85WS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6 m (25 ft.) Cable C25F. . . . . . . . . . . . . . . . . . . . . . . . . .
2