Shure Axient AXT200 User Manual
AXT200 Handheld Frequency Diversity Transmitter
©2011 Shure Incorporated
27B15018 (Rev. 2)
Printed in USA
WARNING: This product contains a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm.
WARNING
• Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify,
disassemble, heat above 140°F (60°C), or incinerate
• Follow instructions from manufacturer
• Never put batteries in mouth. If swallowed, contact your physician or local poison control center
• Do not short circuit; may cause burns or catch fire
• Do not charge or use battery packs with other than specified Shure products
• Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs
AXT200 Handheld Transmitter
1
The AXT200 Handheld Frequency Diversity Transmitter is a rechargeable, remotely controllable handheld transmitter with Frequency Diversity for seamless, uninterrupted
audio in even the most challenging RF environments. In addition to Frequency Diversity, the AXT200 delivers ultra-linear RF performance for more channels on-air and superb
audio quality. Advanced power management supports extended battery life and highly accurate status metering. ShowLink™ Remote Control enables comprehensive realtime remote control of all transmitter parameters, including real-time frequency adjustments.
Features
• Frequency Diversity enables simultaneous transmission on two independent
frequencies to ensure seamless, uninterrupted audio for mission-critical
transmitters. Single carrier mode is available if Frequency Diversity is not
required.
• Ultra-linear RF performance enables more channels on-air
• IR Sync function automatically tunes transmitter to the receiver frequency
• Comprehensive real-time remote control of all transmitter parameters when a
Linked transmitter is within range of a ShowLink Access Point
• Shure lithium-ion rechargeable battery delivers up to 9 hours of runtime from a
single charge
• Advanced control menu to adjust frequency and audio settings from the
transmitter
• 42 dB of adjustable gain for optimal audio quality
• Lockable user interface prevents accidental or inadvertent changes to controls
once settings are made
Transmitter Overview
① Microphone Cartridge
Interchangeable with a variety of Shure cartridges
② LCD Display
View menu screens and settings. Momentarily press power button to activate
backlight.
③ Infrared (IR) Port
Use for automated transmitter programming. Links transmitter to AXT400
Receiver.
④ Shure Rechargeable Lithium-ion Battery
Delivers up to 9 hours of runtime from a single charge
⑤ Locking Ring
Secures the battery and protects the control buttons
⑥ Dual-Band Antenna
Covers UHF tuning range and 2.4 GHz ShowLink signal
⑦ Arrow Buttons
Use to scroll through menu screens and to change parameter values
⑧ Set Button
Enables parameter editing. After editing is complete, press to save changes
and return to the main menu screen.
⑨ Power Button
Hold for 1 second to turn the transmitter on. To power off, press and hold for
2 seconds until the display reads Powering Off. When editing parameters,
acts as an exit button to cancel changes and return to a previous parameter
or to the main menu screen.
8
set
7
1
2
3
4
5
6
9
Included Components
Handheld rechargeable lithium-ion battery (2) AXT920 or
Transmitter carrying case
Zipper bag 26A14
Microphone stand adaptor WA371
Choice of (1) of the following Shure microphone cartridges:
SM58 (RPW112) KSM9 Champagne (RPW180)
BETA 87C (RPW122) BETA 87A (RPW120)
BETA 58A (RPW 118) KSM9 Black (RPW184)
AXT920SL
95A15475
Optional Accessories
Handheld rechargeable lithium-ion battery
Portable handheld charging station AXT904
1-AA battery carrier for AXT200 handheld transmitter AXT921
Microphone stand adapter WA371
Optional Shure microphone cartridges:
SM58 (RPW112) BETA 87C (RPW122) VP68 (RPW124)
BETA 87A (RPW120) SM87A (RPW116) KSM9 Black (RPW184)
SM86 (RPW114) KSM9 Champagne (RPW180) BETA 58A (RPW118)
3
AXT920 or
AXT920SL
Loading...