Shure AONIC 50 Matte Black, AONIC 50 Brown User manual

AONIC 50

Wireless Headphones

The Shure AONIC 50 Wireless Noise-cancelling Headphones user guide (Model: SBH2350).

Version: 1 (2020-F)

AONIC 50 Wireless Headphones

®

Bluetooth Pairing

Headphones automatically enter pairing mode when you power them on the first time or when they have not been previously

paired with this audio source.

1.

From your audio source, select "Shure 50."

2.

When successfully paired, you hear "Connected".

Headphones automatically pair with previously paired devices when you power them on. After a few seconds you will hear

“Connected”.

Manual pairing

1.

Turn off the headphones.

2.

Press and hold the power button for 6 seconds.

3.

When you hear "Bluetooth pairing mode," release the button.

4.

From your audio source, select "Shure 50."

5.

When successfully paired, you hear "Connected".

Note: If the pairing fails on the first attempt, repeat the process from the beginning.

To customize the listening features with your device, download the free ShurePlus PLAY app for iOS and Android.

™

Using the Buttons

Power button

Power on Press and hold, 2 seconds

Power off Press and hold, 2 seconds

1.

Pair Bluetooth

Check battery status Double press (audible status notification)

Turn off the headphones

2.

Press and hold, 6 seconds

3/15

Center button

Play/Pause Press once

Next track Double press

Previous track Triple press

Answer/End a call Press once

Decline a call Press and hold, 2 seconds

Activate voice assistant Press and hold, 2 seconds

1.

Factory Reset

Turn off the headphones and plug into a charger

2.

Press and hold, 7 seconds

Shure Incorporated

Side buttons

Volume up Press +

Volume down Press -

Environment mode/ANC switch

Environment mode Push switch up

Active Noise Cancellation Push switch down

4/15

Hardware reset

If the buttons do not respond to repeated presses, you can perform a hardware reset to force a power off.

1.

Press the +, -, and power buttons simultaneously to immediately power off the headphones. This does not reset any

values you may have changed.

2.

Power on the headphones.

LED indicator

Bluetooth pairing Alternating red and blue

Bluetooth connected Blue for 2 seconds, then off

Bluetooth connection lost Slow blinking blue

Low battery Slow blinking red

Shure Incorporated

Charging Red

ShurePlus PLAY Mobile Listening App

General Description

The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed

audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound,

or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wire

less and True Wireless products in the device tab.

Features

•

Import and play multiple, high-resolution and standard file types

•

Customize presets with the parametric graphic EQ

•

Adjust your volume with the full-screen fader

•

Create playlists and organize your music library by playlist, artist, album title, song title, genre, or composer

•

Quickly dial in your sound with EQ preset modes for a variety of listening situations.

Environment mode

Environment mode allows you to accentuate the ambient noise around you. This is especially useful when you want to listen to

music or are on a phone call, yet you still want to be aware of the sounds around you.

To use environment mode, push the vertical switch on the back of the right earcup to the up position.

In the ShurePlus PLAY app, you can adjust the environment mode across ten levels:

5/15