Shure ADX2FD/B58, ADX2FD/B87A, ADX2FD/B87C, ADX2FD/K8B, ADX2FD/K8N User Manual
...
ADX2FD
Handheld Transmitter
ADX2FD Frequency Diversity Handheld Transmitter User Guide
Version: 7 (2019-D)
Table of Contents
ADX2FDHandheld Transmitter 3
WARNING 3
ADX2FD Handheld Transmitter 3
Features 3
Performance 3
Design 4
Power 4
Included Components 4
Choice of (1) of the following Shure microphone car
tridges: 4
Optional Accessories 4
Optional Shure microphone cartridges: 5
ADX2FD Transmitter Overview 5
Transmitter Controls 6
Home Screen Display 6
Locking the Interface 7
Shure Rechargeable Batteries 7
Checking Battery Info 8
Important Tips for Care and Storage of Shure Recharge
able Batteries 8
Battery Installation 9
ADX2FD SB920 Battery Runtime 9
Menu Parameters 9
Tips for Editing Menu Parameters 10
Menu Map 10
Shure Incorporated
Menu Parameter Descriptions 10
Radio Menu 10
Audio Menu 11
Utilities Menu 11
IR Sync 12
Setting the Frequency Manually 13
RF Mute 13
Safe Start 14
Operating in Frequency Diversity Mode 14
Turning Off Frequency 2 (Freq 2) 15
Input Overload 15
Tone Generator 15
Matching Audio Levels with Mic Offset 15
ShowLink Test 16
Updating Firmware 16
Firmware Versioning 17
Updating the Transmitter 17
Specifications 17
Frequency Bands and Transmitter RF Power 19
Australia Warning for Wireless 21
LICENSING INFORMATION 22
Certifications 22
Information to the user 23
2/23
Shure Incorporated
ADX2FD Handheld Transmitter
WARNING
•
Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat
above 140°F (60°C), or incinerate.
•
Follow instructions from manufacturer
•
Only use Shure charger to recharge Shure rechargeable batteries
•
WARNING: Danger of explosion if battery incorrectly replaced. Replace only with same or equivalent type.
•
Never put batteries in mouth. If swallowed, contact your physician or local poison control center
•
Do not short circuit; may cause burns or catch fire
•
Do not charge or use battery packs other than Shure rechargeable batteries
•
Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packs.
•
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
Note: Use only with the included power supply or a Shure-approved equivalent.
ADX2FD Handheld Transmitter
ADX series transmitters deliver impeccable audio quality and RF performance, and are equipped with ShowLink remote con
trol for real-time parameter adjustments and interference avoidance. This transmitter additionally features Frequency Diversity
for seamless audio in even the most challenging environments. Lightweight aluminum construction, SB920 rechargeable pow
er options (with dockable charging).
®
Features
Performance
•
184 MHz tuning range
•
Frequency Diversity enables simultaneous transmission on two independent frequencies to ensure seamless, uninterrupt
ed audio for mission-critical applications. Single carrier mode is available if Frequency Diversity is not required.
•
20 Hz to 20 kHz range with flat frequency response
•
Automatic input staging optimizes gain setting
•
Diversity ShowLink-enabled for remote transmitter control and automatic interference avoidance
•
AES 256-bit encryption-enabled for secure transmission
•
>120 dB, A-weighted, System Gain @ +10
•
Digital output: >125dB, A-weighted (Dante, AES3, AES67)
•
100 meter (300 feet) line-of-sight operating range
•
Selectable modulation modes optimize performance for spectral efficiency or audio quality:
◦
Standard – optimal coverage, low latency
◦
High density – dramatic increase in max system channel count
3/23
•
Switchable Power Levels (region dependent):
◦
2/10/50 mW (single carrier mode)
◦
2 x 20 mW (Frequency Diversity mode)
•
Built-in tone generator and RF markers to facilitate range-testing
Design
•
Interchangeable Shure microphone cartridges
•
Backlit LCD with easy to navigate menu and controls
•
Rugged metal construction
•
Menu and power lockout
Power
•
Shure SB920 rechargeable batteries offer precision metering and zero memory effect
•
External charging contacts for docked charging
•
Battery Runtime with Shure SB920:
◦
Up to 9 hours in single carrier mode @ 10 mW
◦
Up to 6.5 hours in Frequency Diversity mode @ 10 mW x 10 mW
◦
Up to 5 hours in single carrier, high-power mode @ 50 mW
Shure Incorporated
Included Components
SB920 Shure Rechargeable Battery (2) 95A25763
Zipper Bag 95B2313
Threaded Adapter 31B1856
Swivel Adapter, black 90F4046
Choice of (1) of the following Shure microphone cartridges:
SM58 (RPW112) KSM9 Nickel (RPW188)
BETA 87C (RPW122) BETA 87A (RPW120)
BETA 58A (RPW 118) KSM9 Black (RPW184)
KSM8 Black (RPW174) KSM8 Nickel (RPW170)
KSM9HS Black (RPW186) KSM9HS Nickel (RPW190)
Optional Accessories
SB920 Shure Rechargeable Battery 95A25763
4/23
Shure Incorporated
Battery Contact Cover (part number varies by frequency range)
AD651B Talk Switch Button (black) 90A37347B
Microphone stand adapter WA371
Shure Networked Docking Charger 2-Up SBC240
WA619-A (470-636 MHz), WA619-B
(606-810 MHz), WA619-C (750-960 MHz)
Optional Shure microphone cartridges:
SM58 (RPW112)
SM86 (RPW114)
SM87A (RPW116)
BETA 58A (RPW118)
BETA 87A (RPW120)
BETA 87C (RPW122)
VP68 (RPW124)
KSM9 Nickel (RPW188)
KSM9HS Nickel (RPW190)
KSM9 Black (RPW184)
KSM9HS Black (RPW186)
ADX2FD Transmitter Overview
① Microphone Cartridge
See Optional Accessories for a list of compatible cartridges.
② Display
View menu screens and settings. Press any control button to activate the backlight.
③ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter programming.
④ Control Buttons
Use to navigate through parameter menus and change values.
⑤ Battery Compartment
Requires Shure rechargeable battery.
⑥ On/Off Switch
Powers the unit on or off.
⑦ Handle
Unscrew to access controls and batteries.
⑧ Battery Charging Contacts
5/23
Charging contacts for use with docking battery chargers.
Shure Incorporated
Transmitter Controls
Use to navigate through parameter menus and change values.
X Acts as a 'back' button to return to previous menus or parameters without confirming a value change
O Enters menu screens and confirms parameter changes
∨∧ Use to scroll through menu screens and to change parameter values
Tip: Use the following shortcuts for quick setup:
•
Hold the ∧ button while powering on to lock or unlock the transmitter controls.
•
Hold the X button while powering on to enter the Safe Start menu.
6/23
Shure Incorporated
Home Screen Display
The home screen shows transmitter information and status.
There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of
the following choices:
Name
F1 and F2 Frequency Settings
F1 and F2 Group (G) and Channel (C)
Device ID
The following icons indicate transmitter settings:
Battery runtime in hours and minutes or bar display
Key: Displayed when encryption is enabled
Displayed when controls are locked. Icon will flash if access
is attempted to a locked control (power or menu).
ShowLink signal strength displays 0 to 5 bars
STD: Standard Transmission Mode
HD: High Density Transmission Mode
RF Mute Engaged: Displayed when RF output is muted
Locking the Interface
Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the
home screen when the interface lock is enabled.
1.
From the Utilities menu, navigate to Locks and select one of the following lock options:
◦
None: The controls are unlocked
◦
Power: The power switch is locked
◦
Menu: The menu parameters are locked
◦
All: The power switch and menu parameters are locked
2.
Press O to save.
Tip: To quickly unlock a transmitter: Press O twice, select None, and press O.
7/23
Loading...