Shure AD610 Specification Sheet

AD610 ShowLink® Wireless Access Point

PUSH

⑥

⑦ ⑧ ⑨

Overview

The AD610 ShowLink® access point enables real-time remote control of all ShowLink-enabled Axient® transmitters, including both ADX and AXT series models. The access point allows comprehensive management of transmitter parameters from the receiver or Wireless Workbench® using 2.4 GHz (IEEE

802.15.4) wireless communication. All parameter changes occur without interruption to the performer.

Features

• Wireless network connectivity between all linked transmitters and access points

• Enables real-time wireless remote control of up to 24 transmitters per access point

• ShowLink offers ability to adjust gain, change frequencies, mute signals and more

• True Diversity antenna scheme maintains a robust link in the 2.4 GHz frequency range

• Automatic channel selection scans the 2.4 GHz range for the best channel. Scans can be saved for future analysis in Wireless Workbench

• Automatic frequency agility moves he network to the best available channel if signal degrades

• Is compatible with Axient Digital ADX series and Axient analog (AXT series) systems

Speciﬁcations

Antenna Type 2 Omnidirectional 2.4 GHz Capacity 24 Axient transmitters Mounting Type WA371 Mic Clip or 1/4-20 thread mount Operating Temperature Range –18 °C (0 °F) to 63 °C (145 °F) Storage Temperature Range –29 °C (–20 °F) to 74 °C (165 °F) Dimensions 190 mm x 102 mm x 47 mm (7.34 in. x 3.960 in. x 1.825 in.) H x W x D, without antenna Weight 464 g (16.3 oz.), without antenna Housing Extruded Aluminum Power Requirements Power over Ethernet (PoE) Class 1: 36 to 57 VDC/VAC

ShowLink

Network Type IEEE 802.15.4 Frequency Range 2.40 to 2.4835 GHz (16 Channels) RF Output Power 10 dBm (ERP) / 20 dBm (ERP)

Working Range Under typical conditions: 150 m (500 ft)

Antenna Connection

Connector 2 SMA (Shell=Ground, Center=Signal) Impedance 50 Ω

Scanning Radio

Scanner RF Sensitivity –106 dBm, typical (integrated antenna)

Networking

Network Interface Ethernet 10/100 Network Addressing Capability DHCP or Manual IP address (configurable using Wireless Workbench)

Available Models

AD610 Showlink Wireless Access Point

External Power Supply (if PoE is unavailable): 15 V DC (600 mA), double insulated

Dependent on applicable country regulations

Line of Sight, outdoors for a single system: 500 m (1600 ft) Note: Actual range depends on RF signal absorption, reflection and interference.

ShowLink Acces Point

AD610

Furnished Accessories

WA371 Wireless microphone clip for mounting on a microphone stand C825 Shielded 25-foot Ethernet cable for ShowLink access point, RJ45-to-EtherCon connector

31A1856 Euro thread adapter for WA371 PS43 Power Supply (regionally dependent)

AD610 ShowLink® Wireless

Access Point

Optional Accessories

AXT644 Directional 2.4 GHz Patch Antenna

Updated: 01/18

www.shure.com

Whilst every effort has been made to ensure that the information in this document is correct, we accept no liability in respect of errors or omissions. All speciﬁcations within this document are subject to change without notice.