®
Axient® Digital Wireless Systems
AXIENT
DIGITAL
WIRELESS SYSTEMS
Incorporating the most innovative wireless audio technology in the world, Axient
Digital was engineered from the ground up for professional productions that
demand flawless execution.
With an unprecedented level of signal stability and audio clarity, plus flexible
hardware options, advanced connectivity, and comprehensive control, it’s a
wireless system built to take on the challenges of today—and tomorrow.
RF PROTECTION
With outstanding signal quality in even the most complex, congested environments, Axient®
Digital ensures maximum stability, range, and clarity for uncompromising
audio—anywhere, every time.
AUDIO QUALITY
Axient® Digital defies limitations for both RF and audio quality. With industry-leading low latency,
transparent frequency response, and wide dynamic range, nothing gets in the way of true, pure
sound. No matter the setting, it’s Shure audio quality you can count on.
COMMAND & CONTROL
ShowLink® remote control, Wireless Workbench®, the ShurePlus™ Channels app, and
networked battery monitoring provide unmatched control and insight, for seamless performance.
HARDWARE & SCALABILTY
With two transmitter series to choose from—both compatible with a shared receiver platform—
Axient Digital is a scalable wireless system that provides incomparable sound for a wide range of
applications and settings.
©2017 Shure Incorporated
System Specifications
RF Carrier Range
Working Range
RF Tuning Step Size 25 kHz, varies by region
Image Rejection >70 dB, typical
RF Sensitivity −98 dBm at 10-5 BER
Latency
Audio Frequency Response
Audio Dynamic Range
A-weighted, typical, System Gain @ +10
Total Harmonic Distortion
−6 dBFS input, 1 kHz, System Gain @ +10
System Audio Polarity Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
Operating Temperature Range
Storage Temperature Range
470–960 MHz
Note: Varies by region (See Frequency Range and Ouput Power table)
100 m (330 ft)
Note: Actual range depends on RF signal absorption, reflection and interference.
Standard mode: 2.0 ms
High Density mode: 2.9 ms
AD1: 20 Hz – 20 kHz (±1 dB)
AD2: 20 Hz – 20 kHz (±1 dB)
Note: Dependent on microphone type
XLR Analog Output: 120 dB (A-weighted); 117 (unweighted)
Dante Digital Output: 130 dB (A-weighted); 126 (unweighted)
<0.01%
−18 °C (0 °F) to 50 °C (122 °F)
Note: Battery characteristics may limit this range.
−29 °C (−20 °F) to 65 °C (149 °F)
Note: Battery characteristics may limit this range.
Frequency Range
Band Range (MHz) Transmitter Output (mW)
G53 470 to 510 2/10/35
G54 479 to 565 2/10/20
G55 470 to 636* 2/10/35
G56 470 to 636 2/10/35
G57 470 to 616* 2/10/35
G62 510 to 530 2/10/35
H54 520 to 636 2/10/35
K53 606 to 698* 2/10/35
K54 606 to 663** 2/10/35
K55 606 to 694 2/10/35
K56 606 to 714 2/10/35
K57 606 to 790 2/10/35
K58 622 to 698 2/10/35
L54 630 to 787 2/10/35
R52 794 to 806 2/10/35
JB 806 to 810 2/10
X51 925 to 937.5 2/10
X55 941 to 960 2/10/35
Note: Not all frequencies available in all regions. Contact your authorized Shure dealer for availability.
* with a gap between 608 to 614 MHz
** with a gap between 608 to 614 MHz and a gap between 616 to 653 MHz
Furnished Accessories
Receivers
90XN1371 Hardware Kit
95A8994 BNC Bulkhead Adapter
Var. by region ½ Wave Receiver Antenna (2)
95B9023 BNC-BNC Cable (short)
95C9023 BNC-BNC Cable (long)
95N2035 Coaxial RF Cascade Cable
Var. by region AC Power Cable, VLock
Var. by region AC Power Jumper Cable
95A33402 Ethernet Cable, 3 ft.
95B33402 Ethernet Jumper Cable
Handheld Systems
95B2313 Zipper Bag
31B1856 Euro-threaded Adapter
90F4046 Swivel Adapter, black
80B8201 AA Alkaline Batteries (2)
Bodypack Systems
80B8201 AA Alkaline Batteries (2)
Var. by region ¼ Wave Antenna
WA340 Threaded TA4F Adapter
WA610 Transmitter Carrying Case
26A13 Zipper Bag
44A12547 Belt Clip
NOTE:
This Radio equipment is intended for use in musical professional entertainment and
similar applications. This Radio apparatus may be capable of operating on some frequencies
not authorized in your region. Please contact your national authority to obtain information
on authorized frequencies and RF power levels for wireless microphone products.
Rechargeable Power Management (sold separately)
SB900A Rechargeable Battery
AD series transmitters are compatible with the SB900A lithium-ion
rechargeable battery, which provides up to 9 hours of continuous use
and precise tracking of remaining life and charge cycle details.
SBC200 Dual Docking Recharging Station
This compact and portable unit charges batteries while in transmitters
or out. Up to 4 SBC200s can be chained together to run off one power
supply.
SBC800 Eight Battery Recharging Station
This compact and portable unit charges up to 8 SB900A batteries to
full capacity within 3 hours, with status LEDs to indicate power levels.
SB900A batteries fit securely in the charger for easy, efficient storage
and transport.
SBRC Networked Shure Battery Rack Charger
This tour-ready modular battery charging station charges a variety of
Shure Li-Ion batteries, with support for up to eight SB900A, AXT910
and AXT920, all in a single rack-unit space. Wireless Workbench
networkability and ShurePlus Channels compatibilty provides
convenient remote monitoring of charge status, and an easy-to-read
front panel display that provides key battery charging and health
metrics, including time-to-full, temperature and charge cycle count.
Battery Runtimes (Note: Frequency Band Dependent)
Battery Type
SB900A
Alkaline
NiMH
Li-primary
10 mW
up to 9 hours
up to 8 hours
up to 11 hours
up to 14 hours
www.shure.com © 2017 Shure Incorporated
Component Specifications
AD4Q Four-Channel Wireless Receiver
Overview
The AD4Q Axient Digital Quad Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include
wide tuning, low latency, High Density (HD) mode, and Quadversity™, ensuring solid performance in the most challenging RF environments. Networked control, AES3 +
Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
Features
• Wide tuning range up to 184MHz
• True digital diversity reception per channel for drop-out resistance
• Networked control with Wireless Workbench® and ShurePlus™ Channels app
• Quadversity™ mode for extended antenna coverage and improved RF signal-to-noise
• Front panel headphone jack enables Dante Cue and Dante Browse monitoring
• Configurable Ethernet switch for redundant Dante digital output
• Switchable XLR/AES3 outputs
• Channel Quality meter displays RF signal-to-noise
• Locking AC connectors
• Optional DC module available to support redundant power
Specifications
Dimensions 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
Weight 4.8 kg (10.6 lbs), without antennas
Housing Steel; Extruded aluminum
Power Requirements 100 to 240 V AC, 50–60 Hz; 0.68 A max.
Thermal Dissipation
Audio Output
Gain Adjustment Range –18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration
Impedance
Typical, XLR Line out
Full Scale Output
200 kΩ load
Mic/Line Switch 30 dB pad
Phantom Power Protection Yes
Networking
Network Interface 10/100 Mbps, 1 Gbps, Dante Digital Audio
Network Addressing Capability DHCP or Manual IP address
Maximum Ethernet Cable Length 100 m (328 ft)
Cascade output
Connector Type
Configuration Unbalanced, passive
Impedance 50 Ω
Insertion Loss 0 dB, typical
RF Input
Spurious Rejection >80 dB, typical
Connector Type BNC
Impedance 50 Ω
Bias Voltage 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
RF Carrier Frequency Range
Model-dependent
Maximum: 31 W (106 BTU/hr)
Idle: 21 W (72 BTU/hr)
1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
100Ω
1/4" (6.35 mm): +8 dBV
XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
BNC
Note: For connection of one additional receiver in the same band
AD4Q=A: 470–636 MHz
AD4Q=B: 606–810 MHz
AD4Q=C: 750–960 MHz
AC Power
AD4Q
Axient Digital
Wireless Receiver
IR
PoE
RX 1
A B
OL
1
SYNC
ctrl 1 Dante 1
ctrl 2 Dante 2
AUDIO
AUDIO
RX 2RF
A B
OL
2
SYNC
AES3onAES3 3&4 AES3 1&2
in
thru
output 4
Term 75Ω
word
clock
AUDIO
RX 3RF
A B
OL
3
SYNC
line lift
gnd
mic
-10 dB
output 3
RF
AUDIO
RX 4RF
A B
OL
4
SYNC
line lift
mic
-10 dB
gnd
output 2
line lift
mic
-10 dB
gnd
output 1
line lift
mic
-10 dB
gnd
NAVIGATE
ENTER
PUSH
EXIT
B A
12 V DC out
150mA
D C
cascade
quadversity
POWER
CONTROL
AD4Q Four-Channel
Receiver Rear Panel
AD4Q Four-Channel
Receiver Front Panel
www.shure.com © 2017 Shure Incorporated
Component Specifications
AD4D Two-Channel Wireless Receiver
Overview
The AD4D Axient Digital Dual Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features
include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environments. Networked control and
signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
Features
• Wide tuning range up to 184MHz
• True digital diversity reception per channel for drop-out resistance
• Networked control with Wireless Workbench® and ShurePlus™ Channels app
• Front panel headphone jack enables Dante Cue and Dante Browse monitoring
• Configurable Ethernet switch for redundant Dante digital output
• AES3 output
• Channel Quality meter displays RF signal-to-noise
• Locking AC connectors
• Optional DC module available to support redundant power
Specifications
Dimensions 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
Weight 4.6 kg (10.1 lbs), without antennas
Housing Steel; Extruded aluminum
Power Requirements 100 to 240 V AC, 50–60 Hz; 0.26 A max.
Thermal Dissipation
Audio Output
Gain Adjustment Range –18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration
Impedance
Typical, XLR Line out
Full Scale Output
200 kΩ load
Mic/Line Switch 30 dB pad
Phantom Power Protection Yes
Networking
Network Interface 10/100 Mbps, 1 Gbps, Dante Digital Audio
Network Addressing Capability DHCP or Manual IP address
Maximum Ethernet Cable Length 100 m (328 ft)
Cascade output
Connector Type
Configuration Unbalanced, passive
Impedance 50 Ω
Insertion Loss 0 dB, typical
RF Input
Spurious Rejection >80 dB, typical
Connector Type BNC
Impedance 50 Ω
Bias Voltage 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
RF Carrier Frequency Range
Model-dependent
Maximum: 23 W (78 BTU/hr)
Idle: 15 W (52 BTU/hr)
1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground)
XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
100Ω
1/4" (6.35 mm): +8 dBV
XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
BNC
Note: For connection of one additional receiver in the same band
AD4D=A: 470–636 MHz
AD4D=B: 606–810 MHz
AD4D=C: 750–960 MHz
AC Power
AD4D
Axient Digital
Wireless Receiver
IR
PoE
RX 1
A B
OL
1
SYNC
ctrl 1 Dante 1
ctrl 2 Dante 2
AUDIO
RF
AUDIO
RX 2RF
A B
OL
2
SYNC
AES3 1&2
in
thru
Term 75Ω
word
clock
output 2
line lift
mic
-10 dB
gnd
output 1
line lift
mic
-10 dB
gnd
NAVIGATE
PUSH
B A
12 V DC out
150mA
D C
cascade
POWER
CONTROL
AD4D Dual-Channel
Receiver Rear Panel
AD4D Dual-Channel
Receiver Front Panel
www.shure.com © 2017 Shure Incorporated
Component Specifications
AD1 Bodypack Transmitter
Overview
AD series bodypack transmitters deliver impeccable audio quality and RF performance with wide-tuning, High Density (HD) mode, and encryption. Features
durable metal construction, AA or SB900A rechargeable power (with dockable charging), and TA4 or LEMO3 connector options.
Features
• Two transmission modes:
- Standard for optimal coverage
- New High Density mode for maximum system channel count and robust coverage
• Encryption-enabled, secure transmission
• External contacts for docked charging
• AA or SB900A Li-ion rechargeable batteries
• Detachable ¼ wave antenna
• LEMO3 and TA4 connector options
Specifications
Gain Offset Range –12 to 21 dB (in 1 dB steps)
Battery Type Shure SB900A Rechargeable Li-Ion or LR6 AA batteries 1.5 V
Battery Runtime
@ 10 mW
Dimensions 86 mm × 66 mm × 23 mm (3.4 in. × 2.6 in. × 0.9 in.) H × W × D
Weight 155 g (5.47 oz.), without batteries
Housing Cast Aluminum
Audio Input
Connector
See drawing for details
Configuration Unbalanced
Impedance
See drawing for details
Maximum Input Level
1 kHz at 1% THD
Preamplifier Equivalent Input Noise (EIN)
System Gain Setting ≥ +20
RF Output
Connector SMA
Antenna Type 1/4 wave
Impedance 50 Ω
Occupied Bandwidth <200 kHz
Modulation Type Shure Axient Digital Proprietary
Power
Shure SB900A: up to 9 hours
Alkaline: up to 8 hours
See Battery Runtime Chart
4-Pin male mini connector (TA4M)
LEM03 connector
1 MΩ
Pad Off: 8.5 dBV (7.5 Vpp)
Pad On: 20.5 dBV (30 Vpp)
–120 dBV, A-weighted, typical
2 mW, 10 mW, 35 mW
See Frequency Range and Ouput Power table, varies by region
AD1 Bodypack Transmitter
Microphone Options (see catalog for more)
WL93 WL93 condenser capsule, omnidirectional lavalier mic
WL183 WL183 condenser capsule, omnidirectional lavalier mic
WL184 WL184 condenser capsule, supercardioid lavalier mic
WL185 WL185 condenser capsule, cardioid lavalier mic
MX150-C MX150 condenser capsule, cardioid lavalier mic
MX150-O MX150 condenser capsule, omnidirectional lavalier mic
MX153 MX153 condenser capsule, omnidirectional earset headworn mic
SM35 SM35 condenser capsule, cardioid headset mic
WBH53 WBH53 condenser capsule, omnidirectional headworn mic
WBH54 WBH54 condenser capsule, supercardioid headworn mic
WB98H/C WB98H/C condenser capsule, cardioid instrument clip mic
www.shure.com © 2017 Shure Incorporated
Component Specifications
AD2 Handheld Transmitter
Overview
AD series hand-held transmitters deliver impeccable audio quality and RF performance with wide-tuning, High Density (HD) mode, and encryption. Features
durable metal construction, AA or SB900A rechargeable power (with dockable charging), and black or nickel finish options.
Features
• Two transmission modes:
- Standard for optimal coverage
- New High Density mode for maximum system channel count and robust coverage
• Encryption-enabled, secure transmission
• Frequency and power lockout
• Rugged metal construction in black or nickel finish
• External contacts for docked charging
• AA or SB900A Li-ion rechargeable batteries
• Backlit LCD with easy-to-navigate menu and controls
• Low-profile, lockable power switch
• Available cartridges: KSM8, KSM9HS, Beta® 87A/87C, Beta® 58, SM58®, VP68
Specifications
Mic Offset Range –12 to 21 dB (in 3 dB steps)
Battery Type Shure SB900A Rechargeable Li-Ion or LR6 AA batteries 1.5 V
Battery Runtime
@ 10 mW
Dimensions 256 mm × 51 mm (10.1 in. × 2.0 in.) L × D
Weight 340 g (12.0 oz.), without batteries
Housing Cast aluminum
Audio Input
Configuration Unbalanced
Maximum Input Level
1 kHz at 1% THD,
RF Output
Antenna Type Integrated Single-Band Helical
Occupied Bandwidth <200 kHz
Modulation Type Shure Axient Digital Proprietary
Power
Shure SB900A: up to 9 hours
Alkaline: 8 hours
See Battery Runtime Chart
145 dB SPL, typical (SM58)
Note: dependent on microphone type
2 mW, 10 mW, 35 mW
See Frequency Range and Ouput Power table, varies by region
Microphone Options (see catalog for more)
RPW112 SM58® Cardioid Dynamic Vocal Wireless Microphone Capsule
RPW118 Beta® 58A Supercardioid Dynamic Vocal Wireless Microphone Capsule
RPW120 Beta® 87A Supercardioid Condenser Vocal Wireless Microphone Capsule
RPW122 Beta® 87C Cardioid Condenser Vocal Wireless Microphone Capsule
RPW124 VP68 Omnidirectional Condenser Wireless Microphone Capsule
RPW170 KSM8 Dualdyne™ Cardioid Dynamic Wireless Microphone Capsule (Nickel)
RPW174 KSM8 Dualdyne™ Cardioid Dynamic Wireless Microphone Capsule (Black)
RPW184 KSM9 Dual-Pattern Condenser Wireless Microphone Capsule (Black)
RPW186 KSM9HS Multi-Pattern Dual Diaphragm Condenser Wireless Microphone Capsule (Black)
RPW188 KSM9 Dual-Pattern Condenser Wireless Microphone Capsule (Nickel)
RPW190 KSM9HS Multi-Pattern Dual Diaphragm Condenser Wireless Microphone Capsule (Nickel)
AD2 Handheld Transmitter
www.shure.com © 2017 Shure Incorporated
Loading...