Model A98D
Microphone Drum Mount
User Guide
GENERAL
The Shure A98D mounts Shure BETA 98/S or SM98A microphones on a drum or cymbal. The gooseneck adapter can be inserted into the horizontal or vertical slots of the clamp for optimum flexibility in microphone placement.
DRUM RIM MOUNTING
The clamp fits drum rims measuring from 1/2-in. (12.7 mm) to 2 1/4 -in. (57.2 mm) in height, or on cymbal stands measuring from 3/8-in. (9.5 mm) to 1 1/8-in. (28.6 mm) in diameter.
CYMBAL STAND MOUNTING
WARNING: Do NOT tighten the thumbscrew on the plastic section of the connector as this could cause damage.
NOTE: To minimize potential noise or damage, position the microphone outside the drummer's range of stick movement and cymbal movement.
REPLACEMENT PARTS
Clamp Assembly . . . . . . . . . . . . RPM618
Jaw . . . . . . . . . . . . . . . . . . . . . . . . 32A866
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa:
Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:
Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055
©2005 Shure Incorporated |
Printed in U.S.A. |
27B3087 (Rev. 3) |
|