Shure A81G User Guide

GUARANTEE

This Shure product is guaranteed in normal use to be free from electrical and mechanical defects for a period of one year from date of purchase. Please retain proof of purchase date. This guarantee includes all parts and labor, and is in lieu of any and all other guarantees or warranties, express or implied. There shall be no recovery for any consequential or incidental damages.

SHIPPING INSTRUCTIONS

Carefully repack the unit, have it insured, and return it prepaid to:

Shure Incorporated

Attention: Service Department 5800 W. Touhy Avenue

Niles, IL 60714-4608

If outside the U.S.A., return the unit to your dealer or Authorized Shure Service Center for repair. The unit will be returned to you prepaid.

SHURE Incorporated Web Address: http://www.shure.com 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

In U.S.A., Phone: [phone] Fax: [phone] In Europe, Phone: [phone] Fax: [phone] In Asia, Phone: [phone] Fax: [phone] International Fax: [phone]

MODEL A81G POP FILTER GRILLE FOR THE SM81 MICROPHONE

This accessory pop filter grille increases the versatility of the Shure Model SM81 Unidirectional condenser microphone. It attenuates distracting breath-noise (such as pops and ticks from B’s, P’s and T’s) and allows the SM81 to be used as a handheld vocal microphone. By minimizing pickup of rushing and rumbling wind noise, the A81G also allows the SM81 to be used outdoors in windy conditions.

The A81G is ruggedly constructed with a grille that resists damage and deformation. It fastens securely to the SM81 and can be used when the microphone is handheld or stand mounted.

	E2002, Shure Incorporated	Printed in U.S.A.
	27A1924 (Rev. 2)

INSTALLATION

1.Loosen the knurled collar of the A81G and slip it over the SM81 until the top of the microphone just touches the inside of the A81G. (See Figure 1.)

2.Tighten the A81G by rotating the knurled collar clockwise (as viewed from the rear of the microphone).

REMOVAL

1.Loosen the knurled collar. (Do not attempt to unscrew the A81G without loosening the collar––the SM81’s cartridge will unscrew with the A81G.)

2.Slide the grille off the microphone.

Knurled collar

FIGURE 1. ATTACHING THE A81G TO THE SM81