Shure A710-HOUSING User Manual

A710-HOUSING

Mechanical Housing for MXA710

User guide for the MXA710 housing accessory, which is an empty MXA710 mechanical housing for design purposes.

Version: 4 (2020-G)

Table of Contents

A710-HOUSINGMechanical Housing for MXA710 3

IMPORTANT SAFETY INSTRUCTIONS 3

A710-Housing (2-foot or 4-foot) 4

Shure Incorporated

Installing the Wall-Mounting Bracket 4

Suspending the Microphone from the Ceiling 6

Contact Customer Support 7

2/7

A710-HOUSING Mechanical Housing for MXA710

IMPORTANT SAFETY INSTRUCTIONS

1.

READ these instructions.

2.

KEEP these instructions.

3.

HEED all warnings.

4.

FOLLOW all instructions.

5.

DO NOT use this apparatus near water.

6.

CLEAN ONLY with dry cloth.

7.

DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance

with the manufacturer’s instructions.

8.

DO NOT install near any heat sources such as open flames, radiators, heat registers, stoves, or other apparatus (in

cluding amplifiers) that produce heat. Do not place any open flame sources on the product.

9.

DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third

prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace

ment of the obsolete outlet.

10.

PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11.

ONLY USE attachments/accessories specified by the manufacturer.

12.

USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Shure Incorporated

13.

UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14.

REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the

apparatus.

16.

The MAINS plug or an appliance coupler shall remain readily operable.

17.

The airborne noise of the Apparatus does not exceed 70dB (A).

18.

Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connec

tion.

19.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

20.

Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

21.

Operate this product within its specified operating temperature range.

3/7