Shure A56d User Manual 2

GENERAL

Model A56D

Microphone Drum Mount

User Guide

The Shure A56D mounts microphones on a drum or cymbal. It fits stand adapters with a 5/8-in, 27-thread. An L-adapter extension curves at a 90° angle for optimum microphone placement.

DRUM RIM MOUNTING







The clamp fits drum rims measuring from 1/2-in. (12.7 mm) to 2 1/4 -in. (57.2 mm) in height, or on cymbal stands measuring from 3/8-in. (9.5 mm) to 1 1/8-in. (28.6 mm) in diameter.

CYMBAL STAND MOUNTING









REPLACEMENT PARTS

Clamp Assembly RPM618. . . . . . . . . . . .

Jaw 32A866. . . . . . . . . . . . . . . . . . . . . . . .

L-Adapter Extension 90A4646. . . . . . . . .

5/8”–27 Lock Nut (Large) 31A1857. . . . .

5/8”–27 Lock Nut (Small) 31B1770. . . . .

NOTE: To minimize potential noise or damage, position the
microphone outside the drummer's range of stick movement
and cymbal movement.

SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: [phone] Fax: [phone]
In Europe, Phone: [phone] Fax: [phone]
In Asia, Phone: [phone] Fax: [phone]
International Fax: [phone]

©2003 Shure Incorporated
27B3086 (Rev. 3)

Printed in U.S.A.