POPPER STOPPER WINDSCREENS
Use the Shure Model A2WS Windscreens to attenuate unwanted breath and wind noise in close talk and outdoor applications. It p r e v e nts annoying pops and ticks when a talker
or performer speaks or sings closely into the microphone
and shields the microphone from rushing and whistling
sounds in adverse wind conditions.
Effective and rugged, the A2WS fastens securely to both
hand-held and stand-mounted SM57 and 545 Series microphones. It is available in gray (A2WS-GRA) and black
(A2WS-BLK).
Model A2WS Instruction Sheet
INSTALLATION
1. Slip the windscreen over the microphone until the inside
of the windscreen barely makes contact.
2. Move the windscreen 3 to 6 mm (1/8 to 1/4 in.) away
from the microphone top.
3. Tighten the setscrew to securely fasten the windscreen.
IMPORTANT: Note that the setscrew connects to the
bushing rather than the microphone body.
2002, Shure Incorporated
27A3163 (BF)
SLOT OF
BUSHING
8–32 SET SCREW
APPROX. 905 TO
SCREW
Printed in U.S.A.
Loading...