Shure A268R User Guide

The Shure Model A268R Rack Panel Kit mounts a
Shure Model M267 or M268 Microphone Mixer in a
standard 19–inch (483 mm) audio equipment rack.
The A268R rack panel is finished in non–reflective
black enamel to match the M267 and M268.

INSTALLATION

Model A268R User Guide

RACK PANEL KIT

The kit includes the following components:

S 19 in. x 3

Equipment Rack Panel

S 2–Mounting Brackets (left and right)
S 4–Machine Screws
S 4–Washers
S 4–Hex Nuts

1

/

in. (483 mm x 89 mm) Audio

2

1

Remove the black plastic end caps. Place the

mixer upside–down on a work surface. Remove
the two screws.

2

Remove the four cover-securing screws

nearest the mixer front panel.

3

Attach the left and right mounting brackets

to the mixer with the four cover–securing screws
previously removed.

4

Slide the mixer into the rack panel from the rear.

Fasten the brackets to the rack panel using the
supplied screws, washers and nuts.

2002, Shure Incorporated
27B8020 (Rev. 3)

SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: [phone] Fax: [phone]
In Europe, Phone: [phone] Fax: [phone]
In Asia, Phone: [phone] Fax: [phone]
International Fax: [phone]

Printed in U.S.A.