Shure 95A8994 Instructions

Model UA600 Instruction Sheet

Antenna Rack Mount Kit

The Shure Model UA600 Antenna Rack Mount Kit allows antennas to be installed on the front of a rack-mounted
Shure wireless reciever. Each kit includes the following:

2 bulkhead adapters................................. 95A8994

2 1/2” internal-tooth lockwashers .............95X8631

2 1/2-28 hex nuts .................................... 95W8631

2 RG-58/U antenna cables.......................... UA802

Antenna Cable

Antenna
(Not Included)

Bulkhead Adapter

Hex Nut

Lockwasher

Bulkhead Plug (remove)

INSTALLATION

1. Remove the bulkhead plugs from the front panel.

2. Install the bulkhead adapters as shown.

3. Remove the antennas from the back of the unit and reconnect them to the bulkhead adapters on the front.

4. Use the supplied cables to connect the antenna inputs on the back panel of the receiver to the bulkhead adapters.

27C8632 (Rev. 4)
©2006 Shure Incorporated

SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: [phone] U.S. Fax: [phone] Intl Fax: [phone]
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: [phone] Fax: [phone]
Asia, Pacific:
Shure Asia Limited, Phone: [phone] Fax: [phone]

Printed in U.S.A.