SHUOYING DIGITAL SCIENCE and TECHNOLOGY WDVV9 Users Manual
User’s Manual
WDVV9S
Foreword
Thank you for purchasing our WIFI DV. Before use, please carefully read this User’s Manual for best performance and
longer service life of this product, and properly keep this manual for future reference.
This manual covers the latest information while it was prepared. The displays and pictures used in this manual are for
better understanding of the operation of the product. Due to technical reasons and different production batches, the DV
you receive may be different from how it is described herein.
System requirement
Before using and operating your DV, please know the minimum system requirement to operate it and we strongly
recommend you to use a better PC to operate the product for best performance of the DV. The minimum system
requirement to operate the product is as below:
Operating System
CPU
Internal Memory Larger than 1GB
Sound Card and Display Card
CD Driver Speed of 4 times or faster
Hard Disk Free space of more than 2GB
Others USB1.1 or USB2.0 port
System Requirements
Microsoft system:Microsoft Window 2000，XP, Vista, 7，8
Apple system:Mac OS X ver: 10.0.0 or above version
Intel Pentium of more than 1GB Hz or other CPU with equivalent
performance
The sound card and video card shall support DirectX8 or higher
version.
Features and functions
WIFI，photo shooting, video recording (1080P FHD, 30fps)，car recorder, Playback
5m effective pixels
1.77’’ LCD
Powered by external 1100mah battery
micro USB port + TF card slot + mini HDMI port
120°wide angle 4G lens
IR wireless remote
s
AAppppeeaarraannccee aanndd bbuuttttoonns
I. Using your Wifi DV for the first time
1.Insert a micro SD or a micro SDHC card first, see right picture
High speed card of Class 6 or above is recommended. When using professional video mode, Class 10 is required.
Turn off your DV before inserting/removing card.
2. Power on/off
2.1 Power on: press and hold power button for about 2 seconds then the screen turns on and the camera goes into power on state.
2.2 Power off: when the camera is in idle state, press the power button for about 2 seconds for power off.
Auto power-off: when the camera's idling time reaches power saving mode (1 minute in default), the camera screen will be
2
1.Lens 2. charging indicator /busy lampblue/red 3. 1.77”LCD
4.busy lampred 5. Power on/off (mode switch) 6. OK/shutter
7. battery cabin 8. Dust Cover 9. TF card slot (inserting TF card)
10. HDMI port 11. Micro-USB port (connecting PC) 12. horn hole
13. Mic 14. DISP/MENU button 15. Wifi indicator (red)
automatically turned off for energy saving. When in power saving mode, the work indicating lamp will be on normally. In case no
operation is made for 3 minutes after in power saving mode, it will be turned off automatically powered off.
.3 Shutdown due to Low PowerWhen its power is extremely low, LCD will display the icon
shut down，and please charge the battery timely .
， the camera will automatically
3. Charging battery
The DV uses external li-battery. While power-off, connect the DV to the PC by a USB cable to charge the battery; while charging, the
charging indicator will remain on. It takes about 3 to 4 hours to fully charge the battery, and the indicator will go off when charging
completes.
Remark: blue lamp while charging, red lamp while working and in wifi mode;
4. Function mode switch
The camera has 4 modes, after power on, press Mode button to switch to mode selection, or use APP to switch mode.
Video mode For video recording
Driving mode For car recording;
Photo mode For photo taking;
Playback mode Playing back the saved videos or photos;
Ⅱ.Mode Preview
1. Video Mode Operation
After power on, DV is recoding mode automatically. When in preview state, press the shutter to start recoding. Press shutter again to
stop recording. If the memory card gets full or battery gets low, it will stop recording automatically.
1 Mode icon, indicate recording mode
2 Recording frame rate
3 Indicate video size, FHD 1080P(30FPS)
/ HD 720P(60FPS) / HD 720P(30FPS) available
4 Indicate video quality
5 Recording time, indicate minutes left for recording.
6 Battery icon, indicate current battery volume.
7 REC icon, flash when recording.
8 Recording length. Video mode Recording mode
2. Driving Mode Operation
After power on, shortly press power button for one time to enter driving mode.
1 Mode icon, indicate car recording mode.
2 Recording frame rate
3 Indicate video size, FHD 1080P(30FPS)
/ HD 720P(60FPS) / HD 720P(30FPS) available
4 Indicate video quality
5 Recording time, indicate minutes left for recording.
6 Battery icon, indicate current battery volume.
7 REC icon, flash when recording.
8 Recording length Driving mode Recording mode
Tips1. Car recording mode saves one video segment every three minutes. When the memory card gets full, the earliest video segment
will be deleted, thus it records in loop.
2 .After power on, select car recording mode, then turn off normally and turn on again, connect it with car charger, it will
automatically enter car recording mode and start recording.
Loading...