SHUOYING DIGITAL SCIENCE and TECHNOLOGY PDV3635 3632 Users Manual

PDV3635

Overview

Thank you for purchasing this product! PANOVIEW 360°Camera is a digital panoramic camera with two lenses. Through the application of up-to-date technologies, it enables you to get panoramic videos and photos, creating an experience of brand new panoramic world.

Important

 Before using this product, please carefully read this Manual  Prepare one 32G Micro SD card  Check the camera power. A full charging is recommended before

use (Until the charging indicator goes out)

 Scan the QR Code on next page, or search for “VRCAM720” on

Apple Store and Google Play, and then download and install it

About Camera

1. OLED display

2. Power button/Mode button

3. WIFI indicator (red)

4. Power indicator（red）/Charging indicator (blue)

5. Wifi button/MENU button

6. Busy indicator (red)

7. Shutter button/OK button

8. Lens×2

9. Triangle nut

10. Interface cover (USB/TF)

11. Speaker

12. Microphone

QR Code: For IOS system, please scan this QR Code to get access to Apple Store to download and install “VRCAM720”.

or Android system, please scan this QR Code to get access to Google Play to download and install “VRCAM720”.

Quick start guide

1. Install SD card:

Insert the Micro SD card you prepare into the slot as indicated, as

shown on the right.

Important:

 A high-speed Micro SD card is Class10 above ; or else, this

product may not work normally.

 3.5K@28FPS  Always turn off the camera before inserting or pulling out of the

card.

2. Power-on/off Power-on: Press and hold Power button for about 2 seconds and

release, until it beeps. The display screen will be lighted, as shown below, indicating the product is ready to work (the default work mode after power-on is Shooting mode).

Important:

 If power-on fails, charge the camera first, and see whether the

blue indicator lights up during charging. If yes, it indicates the product is being charged.

Power-off: After shooting stops, press and hold Power button for about

3 seconds and release. The Display will display “GOODBYE” and turns

off. No operation on mainframe for 3 minutes under Power-save mode (default), the camera will automatically power off.

usd U3 high-speed Micro SD card.

3. Charging

Use data cable included in the product pack for camera charging. During charging, the indicator displays in blue and lights constantly; when charging completed, the blue indicator goes out.

Important:

 If other charger is used, check the output power before use to

ensure it within 5V/1.5A above.

4. Recording or shooting This camera has Recording mode and Shooting mode. After power-on, press MODE (Power button) to switch between different modes, and the corresponding mode icon will be displayed on the screen. Video: In Recording mode, press Shutter button, and the camera get started to work. The display screen displays the video recording timing.

Stop recording: During recording, press Shutter button to stop it. The video will automatically be saved on your camera storage card. At that moment, the display screen will show remaining time available for recording as below:

Shooting: In Shooting mode, press Shooting button to take photos. After shooting, the display screen will display the number (estimated value) of pictures the available space on you camera storage card can save.

+ 10 hidden pages