SHUOYING DIGITAL SCIENCE and TECHNOLOGY PDV3606 User Manual

Panoramic View Camera
0
Overview Thank you for purchasing this product!
Panoramic View Camera is a digital panoramic c ame ra with two lenses.
Through the application of up-to-d ate technologies, it enables you to ge t panoramic videos and photos, creating an experience of brand new panoramic world.
Important
Before using this product, please carefully read this Manual  Prepare one 32G (Class 6~Class 10) Micro SD card  Check the camera power. A full charging is recommended before
use (Until the charging indicator goes out)
Scan the QR Code on next page, or search for “SYVR360” on
Apple Store and Google Play, and then download and install it
About Camera
1. LCD display
2. Triangle nut
3. Power button/Mode button
4. Shutter button/OK button
5. Wifi button/MENU button
6. Busy indicator (red)
7. WIFI indicator (red)
8. Interface cover (USB/TF /Reset hole)
9. Microphone
10. LENS
11. Rope hole
1
QR Code: For IOS system, please scan this QR C ode to get access to Appl e Store to download and install “SYVR360”.
or Android system, please scan this QR Code to get access to Google Play to download and install “SYVR360”.
2
Quick start guide
1. Install SD card:
Insert the Micro SD card you prepare into the slot as indicated, as
shown on the right.
Important:
A high-speed Micro S D card betw een C las s 6~C lass 10 i s a mus t;
or else, this product may not work normally.
Always turn off the camera before inserting or pulling out of the
card.
2. Power-on/off
Power-on: Press and hold Power button for about 2 seconds and
release, until it beeps. The display screen will be lighted, as shown below, indicating the product is ready to work (the default work mode after power-on is Shooting mode).
Important:
If power-on fails, charge the camera first, and see whether the
blue indicator lights up during charging. If yes, it indicates the product is being charged.
Power-off: After shooting stops, press and hold Powe r button for about 3 seconds and release. The Display will display “GOODBYE” and turns off. No operation on mainframe for 3 minutes under Power-save mode (default), the camera will automatically power off.
3
3. Charging
Use data cable includ ed i n the product pa ck for camera chargi ng. D uring charging, the indicator displays in blue and lights constantly; when charging completed, the blue indicator goes out.
Important:
If other charger is used, check the output power befor e use to
ensure it within 5V/0.5A ~ 5V/2.0A.
4. Recording or shooting
This camera has Recording mode and Shooting mode. After power-on, press MODE (Power button) to sw itch between different modes, and the corresponding mode icon will be displayed on the screen. Video: In Recording mode, press Shutter button, and the camera get started to work. The display screen displays the video recording timing.
Stop recording: During recording, press Shutter button to stop it. The video will automatically be saved on your camera storage card. At that moment, the display screen will show remaining time available for recording as below:
Shooting: In Shooting mode, press Shooting button to take photos. After shooting, the display screen will display the number (estimated value) of pictures the available spa ce on you camera storage card can save.
4
Loading...
+ 11 hidden pages