Shunxun SX-MX444-HD4K2K Operation Instruction Manual
Operation instruction
SX-MX444-HD4K2K HDMI Matrix
Operating Instruction
Operation instruction
Thank you for purchasing this product. For optimum performance and safety, please read these instructions
carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and
extend the life of your equipment.
Operation instruction
Table of Contents
1. I n t r o du c t i o n. . . . . ... . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . .. . . . . . ... . . . . . ... . . . . . . . . . 4
2. Fe a t u r e s . . . . . . . ....... . . . . . . . . . . . . . . . ..... . . . . . . . . . . . . ....... . . . . . . . . . . . . . ....... . . . . . . . . . . . . . . . .... . . . .. . . . . 4
3. Pa nel Des cr ip tio ns... .. ... .. ..... ..... .. ... .. ... .. ..... ..... .. ... .. ..... ..... .. ..... ..... ..... ..... .. ..... .. ..... ..... .....4
4. Re mo te Con trol Desc ri pt ion s.... .. ..... .. ..... ....... ....... ..... .. ..... .. ..... .. ..... ... ...... .. ..... ..... ..... .. ..... 6
5. Ap plica ti on Diagra m. .. ..... .. .. ... .. .. ..... .. ..... .. ....... ....... ....... .. ....... .. ... ...... ....... ..... ....... .. ..... .. ..7
6. Spe cif icat ion s... ... .... ... . ... ... . ... ... . ... .... ... . ... ... .... ... . ... ... . ... ... . ... .... ... .... ... ... .. .... ... . ... ... . ..8
7. P a c k a g e C o n t ents . . . . . . . ... . . . . . . . ... . . . . . . . . ..... . . . . . . ... . . . . . . . ... . . . . . . . . ... . . . . . . . ... . . . . . . . ..... . . 8
8. RS- 2 32 P in A ssi g nmen t .... . .... .... . .... . ... . .... . .... . .... . ... . .... . .... . ... . .... . ... . .... . ... .... . .... . .... . .9
9. DIP f or E D I D Set t i n g . . . ....... . . . . . ...... . . . . . . ..... . . . . . . . ...... . . . . . ....... . . . . . ...... . . . . . .. . . . . . ...... . . . 9
10. G U I c o n t ro l.... . . . . . . ... . . . . . . ... . . . . . . ... . . . . . . .. . . . . . . ... . . . . . . ... . . . . ... . . . . . . ... . . . . . . . . ... . . . . . .... . 1 0
11. RS-232 Comma nds..... .................................................................................. ..........................19
12. Wa rra n ty Pol icy . ... ... . ... ... ... ... .... ... ... ... . ... ... ....... ... ... ... . ... ... ... ... .... ... ... .. .. ... ... ....... ... ... . 20
Operation instruction
Introduction:
The SX-MX444-HD4K2K 4×4 Matrix with IR matrix for HDMI routes four Hi-Def sources to any four HDTV
displays, supporting 1080p Full HD up to 4K plus all 3D formats, along with multichannel digital audio formats
such as Dolby® True HD and DTS-HD® Master Audio™. Each source can be routed to any display using the
front-panel push buttons, IR remote control,and RS-232 interface.
Features:
•
Supports resolutions up to 1080p@60HZ,48-bit deep color, 4k@30HZ
•
Allows any source to be displayed on multiple displays at the same time
•
Allows any HDMI display to view any HDMI source at any time
•
Dolby TrueHD and DTS-HD master audio pass through HDMI output
•
Advanced EDID management for rapid integration of sources and displays
•
Multiple switching mode, push-in button, IR remote control,and RS-232 control
•
Easy installation with rack-mounting ears
•
Full 3D pass- through.
•
HDCP compliant
Panel Descriptions
Front Panel
1. IR receiver window----Receive the IR from the remote control of SX-MX444-4K2K.
2. Power LED indicator---Indicate the status of the power for the matrix.
3. HDMI output selection button 1 to 4---Press to select the output from 1 to 4.
4. Input LED indicator---Indicate the status of the input for the matrix.
Operation instruction
Back Panel
1. IR inputs 1 to 4 ---- 3.5mm stereo phone-jack
2. IR outputs 1 to4 ---- 3.5mm stereo phone-jack
3. IR extension receiver input ---- 3.5mm stereo phone-jack
4. Power switcher---- Press to power on/off the matrix
5. HDMI inputs 1 to 4----Connect HDMI sources
6. HDMI outputs 1 to 4----Output for displays, AVR etc.
7. RS232 female port----Connect to the PC using RS232 cable
8. Power port---Use included DC adaptor to power the matrix switcher.
Operation instruction
Remote Control Description
Output and Input select
A. OUTPUT-X select INPUT-Y:
1. Press OUTPUT-X (X means 1 to 4 of outputs)Press INPUT-Y ( Y means 1 to 4 of inputs )
2. Press OUTPUT-X (X means 1 to 4 of outputs) press the left and right arrow buttons to select the input.
B. All outputs select INPUT-Y: Press ALL button in zone OUTPUTPress INPUT-Y button ( Y means 1 to 4 of
inputs ), then INPUT-Y switched to ALL OUTPUTS
C. Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in Zone
OUTPUT
EDID Set Up
Operation instruction
A. Fixed EDID to INPUT-Y/ALL
Press 1080I/1080P/3D/4KPress 2.0CH/5.1CH/7.1CHINPUT-Y/ALL button in Zone INPUT
B. Copy EDID of OUTPUT-X to INPUT-Y/ALL
Press COPY buttonPress OUTPUT-X buttonPress INPUT-Y/ALL button
C. User defined EDID to INPUT-Y/ALL
Press USER1/USER2 buttonPress INPUT-Y/ALL
NOTE: Pressing button sequence should be finished in 5 seconds, otherwise, operation discarded.
Application Diagram
Specifications:
Bandwidth: 2.97Gbps per color
Video Input Connectors: 4x HDMI Type A, 19-pin, female, locking
Video Output Connectors: 4x HDMI Type A, 19-pin, female, locking
RS-232 serial port: DB-9, female
IR Input ports:
5x 3.5mm stereo jack
IR Output ports: 4x 3.5mm stereo jack
Rack-Mountable:
Rack ears included
Dimensions (W x H x D): 256mm x 114mm x 43mm , without feet
Shipping Weight:
1.0kg
Operating Temperature:
32°F to 104°F (0°C to 40°C)
Storage Temperature :
-4°F to 140°F (-20°C to 60°C)
Power Supply: 12V/2A DC
Loading...