Shunxingda Telecom Equipment SXD F6188 User Manual

Contents

Thank you …………………………………………………………..…....…..1

Introduction to Bluetooth Wireless

Communication Technology ………………………………..…..…..…1

Check the Items ………………………………………………..……...…….1

Product Spectification,

Parametersand Descriptions ………………………………...…..……1

1.Produce Over view ………………………………………………....…..2

2.Charge the Headset ………………………………………….....……..2

3.Pair, Switch on off the Headset ………………………..…………3

4.Pair the Headset with a

Biuetooth Cell Phone ……….....................................................……3

5.Pair the Headset with Computer ………………………….……..4

6.Pair the Headset with Multiple Devices …………………....….4

7.Wear the Headset ……………………………………………….….……4

8.Play Music ……………………………………...……………………......…5

9.Make and Receive Calls

through the Headset ……....................................................….....…5

10.Meanings of Indicator

Light and Warning Tones…….......................................................…6

11.Toxic and Hazardous

Substances or Elements …………...................................................6

Thank you! Thank you for using Our Bluetooth wireless Stereo Headset . Please read this guide carefully before use.

Introduction to Bluetooth Wireless Communication Technology Bluetooth is a wireless technology supporting short distance communication of devices (usually within 10m).It enables the wireless information to exchange among IT digital devices such as Bluetooth cell phones, bluetooth headsets and laptops, etc. ”bluetooth” technology can effectively simplify the communication between devices, and through it the data transmission is consequently more rapidly and efficiently.

Check the Items

1、Headset body 2、USB cable 3、User Guide 4、PC cable

Product Specification Version of bluetooth bluetooth v2.1 +edr Bluetooth protocol hfpv1.5/a2dpv1.2/avrcpv1.0

Output power class Ⅱ

Effective distance 10m *Working hours of the head Listening to music: about 8 hours Calling: about 9 hours Standby time of the headset About 250 hours Charging input voltage DC:+2.8-4.2VA Charge time of the headset About 2.5 hours

*Note: Due to the different pairing devices and using environment, the working hours of the headset are different.

1. Product Overview

1、Flexible head are 6、Multifunction key 2、<key: Previous 7、Charge interface 3、>key: Next 8、Built-microphone 4、-key: volume down 9、Line in access entry 5、+key: volume UP

*Multifunction key: switch on/switch off/answering call/hang up/refuse/ volume dial/mute/call waiting/replay/pause/resume(play)

2. Charge the Headset This headset has an internal rechargeable battery. The battery must be fully charged before you can start using the headset.

By use of travel charger

1.Connect the charger to the standard AC power socket.

2.Connect one end of the USB cable to the charger, and the other end to the charge interface of the headset. Red light on: charging. Red light off: fully charged.

3.Charge time with travel charger: about 2.5 hours.

By use of USB charging cable

1.Connect the USB charging cable to the USB interface of the computer.

2.Connect the other end of the USB cable to the charger of the headset. Red light on: charging. Red light off: fully charged

3.Charge time with travel charger: about 2.5 hours

3.pair,Switch on or off the Headset

Function

pairing mode

switch on the headset

switch off the headset

Note: The pairing mode lasts for 2 minutes. The headset will automatically switch to standby mode if no pair is made with any devices over 2 minutes. If no device connection is made 5 minutes the headset is switched on, the headset will automatically be switched off to save power.

4.Pair the Headset with a Bluetooth Cell Phone First, please make sure the bluetooth function is available for the cell phone. Specific pairing procedures shall be different depending on different cell phone. For detailed information, please read the Cell Phone User Guide concerning the pairing guidance of Bluetooth devices.

The pairing procedures are as follows:

1.Keep the distance between the cell phone and the headset with in 1m.

2.Make the headset enter into the pairing mode (please refer to the above mentioned “pairing mode”)

3.Active the bluetooth function of the cell phone, to search for the Bluetooth devices. After finishing the search, select “Tzumi BT” in the device list displayed

4.Press “yes” or “enter” key to confirm the successful pairing in accordance with the hint of the cell phone.

5.After the successful connection, the blue light of the headset will flash quickly twice every four seconds.

Note: After a successful pairing devices will memorize each. Therefore, no pairing will be needed next time. Cell Phone will Bluetooth version lower than V2.1 will require for password or PIN code entry: “oooo”.

Operation indicator light

confirm the headset is switched off, Otherwise,switch off the headset first. Press and hold the multifunction key for about 5 seconds and release it until the alternative flash of red and green lights.

Press and hold the multifunction key for about 3 seconds and release it until the flash of the blue light

Press and hold the multifunction key for about 5 seconds and release it until the flash of the red light

Alternative flash of red and blue light

Rapid flash of the blue light for four time

Rapid flash of the red light for four time

warning tone

one long "whistle".followed by two continuous short "honk"

one long "whistle"

5.Pair the Headset with a computer First please make sure the computer is with Bluetooth function. Otherwise, you need to buy a stereo Bluetooth adapter. the pairing procedures for computer with Bluetooth function are follows:

1.Keep the distance between the headset and the computer with in 1m.

2.Make the headset enter into the pairing mode (please refer to “how to enter the pairing mode”).

3.Active the Bluetooth option of the computer, click and select” add device”,--click “next” select “Tzumi BT”---click “next”---and click “close”.

4.After the pairing and connection are successful, the blue light of the headset will flash quickly twice every four seconds. Notes: This pairing is based on Windows VISTA and Windows7 operation systems. Other versions should be operated according to system hints; If the Bluetooth version of the computer is lower than V2.1, the pairing“oooo” password will be required.

6. Pair the Headset with Multiple Devices This headset can set up connection with two Bluetooth devices at the same time at most, and one of the connections is for hands-ferr profile(hfp). For multiple devices pairing and connection, please refer to the following procedures:

1.First pair the headset with the Bluetooth transmitter (please refer to the “pairing with Bluetooth cell phone”).

2.Switch off the Bluetooth transmitter.

3.Pair and connect the headset with Bluetooth cell phone (refer to the “pairing with Bluetooth cell phone”)

4.Switch on the transmitter again, and the transmitter will automatically initiate the connection to the headset.

Note:After the successful pairing with multiple devices, the pairing devices will memorize each other. Unless the pairing information is deleted because of new pairing, the multiple device connection can be established next time by making the hand-free profile connection between the cell phone and the headset firstly and then start the transmitter. Cell phone which support both HSP and A2DP protocols can set up HSP and A2DP connection with the headset if it is started again.

7. Wear the Headset Flexible design is used for the head are of this headset. Please adjust it according to the actual situation. On the headset, the mark “L” and the mark “R” correspond to the left ear and the right ear, respectively. Please wear the headset on the head according to the corresponding marks.

8.Play Music When the headset connects with a computer which supporta A2DP.a bluetooth cell phone or a bluetooth transmitter,you can enjoy the wireless music through the headset.

Function

Headset Status

Pause

Play music

Pause

Play music

Headset Status

Ring bell for coming calls

Standby

calling

calling(mute)

mute

Press the+key shortly or press and hold the+key

Press the-key shortly or press and hold the-key

Press and hold the multifunction keys for 2 seconds,and release the keyuntil hearing the warning tone.

Resume

Volume up

Volume down

Nate: when the volume of the headset is tuned to the maximum or minimum, you will the‘dingdong’warning tone

9.Make and Receive Calls through the Headset

Function

Answering coming calls

Refuse coming calls

Redial the last number

End the call

Call switching

Volume up

Volume down

Microphone

Cancel the mute

Voice dial

Nate: *Some cell phones are not applicable for the functions listed in the table,Please read the User Guide of the cell phone; *When the volume of the headset is tuned to the maximum,you will hear the ”dingdong’warning tone

Operation

Press the multifunction key shortly

Press the key shortly

Operation

Press the multifunction key shortly

Rapidly press the multifunction key for twice

Press the multifunction key shortly

Press the+key shortly or press and hold the+key

Press the-key shortly or press and hold the-key

Fast press the multifunction key for twice

Hint

One short honk sound

None

One short honk sound

Hint

One short honk sound

None

Warning tone rings for twice for every 3 seconds

None

One short honk sound

10.Meanings of lndicator Lights Warning Tones

During Charge

Indicator Light

Red light on

Red light off

Indicator Light

During Charge

Charge Done

Meanings of Warning Tones

Warning Tone

Warning tone rings constantly for twice every 5 seconds

One’honk’warning tone rings every 20 seconds.

Headset Status

Calling,with the microphone mute on this side

Low battery of the headset

During Charge

Alternative flash of red and blue lights

Blue light(turns to red light when the battery is low) flickers rapidly twice every 1 second.

Indicator

Headset Status

Pairing status

Status (Not connected with devices)

Status (Already connected with devices)

Calls coming

Coming

11.Toxic and Hazardous Substances or Elements

Parts name

Parts circuit board subassembly

Plastic cement

Metal

‘X’ the content of the hazardous and toxic substances is below the limit specified in SJ/T11363-2006 standard: O the content of the hazardous and toxic substance exceeds the limit specified in SJ/T11363-2006: The information provided in this table is based on the data provided by the supplier internal testing resalts of “Tzumi”. Under current technology , some hazardous substances contied in some parts has been controlled by “Tzumi” to the minimum. Tzumi will keep making efforts to reduce using of hazardous substances or elements through technology improvement.

Environmental protection use period of the products shall be 10 years, and its mark is shown in the right figure. The environmental protection use period of replaceable parts of batteries may be different from that of the product. The environmental protection use period shall be valid only under the normal using conditions specified in the user guide

Toxic and Hazardous Substances or Elements

lead(Pd) mercury(HG) cadmium(Cd)

hexavalent chromium(Cr)

polybrominated bipheayls(PBB)

polybrominated diphenyl rthers(PBB)

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.