Showven SPARKULAR mini User Manual

SPARKULAR mini
USER MANUAL

V1.0

Showven Technologies Co.,Ltd.

SPARKULARmini

USER MANUAL

Please read this manual carefully before operating this product.

This manual contains the warranty card, please keep it well.

Safety Information

》Unauthorized repair are prohibited, it may cause serious incident.

》Keep SPARKULAR mini dry and do NOT use in rain or snow.

》Make sure lid of feeding hopper are well covered when use Sparkular mini.Accidentally Burning of Composite Ti can

only use sands to extinguish. Composite Ti should keep away from moisture and stored in a dry sealed environment.

》Keep audience and flammable material at a minimum distance of 3m from SPARKULAR mini. Make sure sparks shoot

out from Sparkular mini can NOT touch any objects.

》Clear material for Sparkular mini is necessary both before the show and after the show, to clear the Composite Ti

remains in the pipe. Check whether there are Composite Ti aggregate in the nozzle after each show, if any, please

clean it up, or it will affect the shooting effect or even damage Sparkular mini.

》The Sparkular mini power supply cable (sparkular mini power supply EX-cable) maximum allowed cascade for Sparkular

mini is 6pcs(BT06)/3pcs(BT07), exceed connecting may result in damage or even cause fire.

》For better heat dissipation, block the air intake and air outlet is prohibited.

》Cover of nozzle of Sparkular mini is prohibited.

Description

Model BT06/BT07

Dimension 168×180×228mm

Weight 4.5kg

Input AC 220V 50/60Hz (BT06)

AC 110V 50/60Hz (BT07)

Work Power 380W

Work Temp. -10℃ ~ 50℃

Casing Anti-flaming ABS

Fountain Height 2.0m~3.5m,Depend on different type of composite Ti

Interface Double DMX input interfaces, double AC power interfaces

Advantages：

》Integrating wireless technology,Not exposed,anti-collision.

》One button start.

》Tilt protection function. More secure.

》Sophisticated design, light weighted and portable.

1

Operation Panel:

LCD information display area, showing operate menu and working status of machine.

LED display area：

READY: After turn on machine, it will automatically preheat around 5 minutes, when the "READY" green light turns

from flashing into long on, indicates that the machine is ready to work.

DMX: Flashing shows that DMX signal is connected, otherwise is without signal.

FAULT: When any malfunction , the light turn on.

HEAT: When the machine is heating, signal light turn on.

Control button area：

MENU: Short press to switch interface, press for 3 seconds can switch to the advanced setup interface.

﹣ : Parameters down.

+: Parameters up.

ENTER: Confirm and save parameters.

Radio frequency identification area：

》Composite Ti with RFID card, swiping cards used to identify

parameters and types of granules.

》Please note that granules RFID card can increase the single

machine specific working time. The card is disposable,one card

can only use one time.

2