Show Technology FusionBAR Q XV User Manual
Outdoor-rated RGBW LED batten
and 15 x 1 pixel mappable matrix
www.showtech.com.au
2
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are therefore marked with
.
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make
risk an electric shock.
•
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
- in places subject to vibrations or bumps;
- in places with a temperature of over 40 °C.
an inspection or contact the manufacturer directly.
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Always additionally secure the projector with the safety rope. When carrying out any work, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Do not touch the product’s housing when operating because it may be very hot.
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
19
3.16 W-DMX WIRELESS SETTING
The FUSIONBAR QXV IP features an onboard W-DMX receiver. By default, W-DMX is OFF. To activate:
• Press the MENU button until the display shows Wireless Setting , then press ENTER.
• Press the UP/DOWN buttons to select Receive On , then press ENTER.
• To reset the onboard W-DMX receiver, select Receive Reset , then press ENTER.
3.17 FACTORY RESET
The FUSIONBAR QXV provides a factory reset function to restore all default values:
• Press the MENU button until the display shows Reset Factory , then press ENTER.
• Press the UP/DOWN buttons to select Yes , then press ENTER.
3.18 PHOTOMETRICS
Beam Angle:
16°
Full
42935 lux 4771 lux
1717 lux
1m
3m
5m
3
Packing content
FUSIONBAR QXV
• Mounting bracket (2 pcs.)
• Power cable
• User manual
TABLE OF CONTENTS
Safety
General instructions
Warnings and installation precautions
General information
1 Introduction
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
2.2 Dimensions
1.2 Maintenance
Cleaning the unit
Trouble shooting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Auto show
3. 5 Static mode
3. 6 Master/Slave mode
3. 7 Linking
3. 9 DMX addressing
3. 10 Connection of the DMX line
3. 11 Construction of the DMX termination
3. 12 DMX control
3. 13 Fixture settings
3. 14 Fixture information
3. 15 White balance calibration
3. 16 W-DMX wireless setting
3.17 Factory reset
3.18 Photometrics
18
3.13 FIXTURE SETTINGS
It is possible to change the parameter values in the following ways:
Dimmer
until shows Dimmer Mode
• Press the button UP/DOWN to select
• Press ENTER button to store, then press MENU to return to main menu
BackLite
• To activate Backlight display press the button MENU so many times until shows Back Light, and press
• Press the button UP/DOWN to select On - 10S - 20S - 30S.
3.14 FIXTURE INFORMATION
Fixture Hours
• Press the button MENU so many times until shows Information.
• Using the button UP/DOWN to select Fixture Hours,
• Then the display will show the working hours.
Version
• Press the button MENU so many times until shows Information
• Select through the button UP/DOWN the Version menu voice.
3.15 WHITE BALANCE
Enter the White balance to adjust the Red, Green, Blue and White
• Press the button MENU so many times until shows White Balance
• Select the color R, G, B, W using the UP/DOWN buttons, then press ENTER.
• Using UP/DOWN button, select the desired color value 125 - 255.
• Press ENTER button to continue to the next color R, G, B, W.
• Continue until the desired mix is obtained.
• Press the MENU button to go back or wait a few seconds to exit the setup menu.
, then press MENU to return to main menu
Press MENU to return to main menu
Press MENU to return to main menu
Loading...