showtech LEDPRO130 User Manual

LED PROFILE SPOT - HIGH POWER

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there­fore marked with

.

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make
risk an electric shock.

•
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.

• This unit is not for home use, only professional applications.

- in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

an inspection or contact the manufacturer directly.

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com­ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.

11

2-CHANNEL MODE

3-CHANNEL MODE

6-CHANNEL MODE

DMX CHARTS

1 Dimmer 000-255 0嗣100%

LED Frequency2 See chart below

Channel Function Value Description

1 Dimmer 000-255 0嗣100%

000-010 No Function

Strobe2

011-255 Slow to Fast

3 LED Frequency See chart below

Auto Programs

Program Speed

Dimmer curve

3

4

5

1

Dimmer

Strobe2

000-255

000-010

011-255

000-010

011-070

071-130

131-190

191-255

000-255

000-051

052-101

102-152

153-203

204-255

0嗣100%

No Function

Slow to Fast

No Function

Auto Program 1

Auto Program 2

Auto Program 3

Auto Program 4

0 ~ 100%

Preset dimmer speed from display menu

Dimmer curve o

Dimmer curve mode 1 (fast speed)

Dimmer curve mode 2 (medium speed)

Dimmer curve mode 3 (slow speed)

Channel Function Value Description

LED Frequency6

000-010

011-050

051-100

101-150

151-200

201-255

Use frequency set via onboard menu

600Hz

1200Hz

2000Hz

4000Hz

25KHz

3

Packing content

EPROFILE HP

TABLE OF CONTENTS

Safety

General instructions
Warnings and installation precautions
General information

Introduction

Features
Specications

Maintenance

Cleaning the unit

Fuse replacement

• Mounting bracket

• Warranty card

• User manual

Overview

Dimensions

Operation

Trouble shooting

Display menu functions
DMX functions
DMX pin diagram

Menu Function Chart

Photometrics

DMX Function Chart

• Power cord

10

Beam Angle: 19°

Luminance (lux)

Distance (m)

Full

1m 3m 5m 7m 10m

0

187650 20850 7550 3830 1877

Beam Angle: 26°

Luminance (lux)

Distance (m)

Full

1m 3m 5m 7m 10m

0

148500 16500 5940 3031 1485

Beam Angle: 36°

Luminance (lux)

Distance (m)

Full

1m 3m 5m 7m 10m

0

72450 8050 2950 1479 725

Beam Angle: 50°

Luminance (lux)

Distance (m)

Full

1m 3m 5m 7m 10m

0

35460 3940 1580 724 355

PHOTOMETRICS

4

INTRODUCTION

The EPROFILE HP is a high-output LED prole.

FEATURES

- Crisp gobo image projection, even at close range

- Extremely at eld projection

- Higher output than traditional 750W ellipsoidal reector spotlights

- 200W LED with extremely high light output

- Flawless dimming with consistent color temperature throughout the dimming curve

- Flicker-free output with selectable PWM frequencies for worry-free video

- Quiet operation suitable for studio use

- Power linking (PowerCon In/Out)

- Rugged die-cast body and low-maintenance design

- Master/Slave mode, Auto Shows

- Manual control via onboard menu

- Selection of four dimming curves

- DMX control

- Available lens tubes: 19° - 26° - 36° or 50° (not included)

SPECIFICATIONS

Light Source: 200W COB 3000K (CRI: 93)
Beam Angle: 19° / 26° / 36° / 50°
Output: 7232 / 5115 / 3330 / 1415 LUX @ 5 meters
Focus: Manual
Strobe: 0-30 Hz
Dimming: 4 dimming curve modes
Control: DMX
DMX Channels: 2 / 3 / 6
Built-in Programs: Yes
Display: OLED function menu with 4 touch buttons
Mains: 100V-240V, 50/60 Hz
Consumption: 205W
Power connections: Neutrik PowerCon In/Out
Data connections: 5-pin XLR In/Out for DMX
Housing: Diecast aluminium
Finish: Matte black
IP rating: IP20
Cooling: Active (variable speed fan)
Operating temperature: 0°C to 40°C
Max. Housing: 54°C
Dimensions: 528 x 342 x 526 mm
Weight: 7.11 KG

9

MENU FUNCTIONS

MENU UP DOWN ENTER

Used to access the menu or
to return a previous menu
option

Navigates downwards through
the menu list and increases
the numeric value when in a
function

Navigates upwards through
the menu list and decreases
the numeric value when in
a function

Used to select and store the

current function value or
option within a menu

UP

ENTER

MENU

DOWN

DMX Address

DMX Mode

Static

Auto Show

Master/Slave

Dimmer Mode

LED Frequency

Fan Mode

Back Light

Information

Function Options Values Notes

Default001

Default6CH

DefaultAuto 4 / Speed: 100

DefaultSlave

DefaultO
Sets dimmer curve

Default1200Hz

Default: Auto

Default

Dimmer: 255 / Strobe: 0

DefaultOn
Sets delay (in seconds)

<0-255>

<0-255>

<1-100>

<1-100>

<1-100>

<1-100>

<001 ~ 512>

2Ch

3Ch

6Ch

Dimmer

Strobe

Auto1

Auto2

Auto3

Auto4

Master

Slave

O

Dimmer1

Dimmer2

Dimmer3

600Hz

1200Hz

2000Hz

4000Hz

25KHz

Auto

High

On

10S

20S

30S

Fixture Hours

UID: 030F00600001

<9999>

Version

<v1.0>

8

OPERATION

DISPLAY MENU FUNCTIONS

- DMX Address: Assign DMX starting address to the EPROFILE HP

- DMX Mode: Select either 2-, 3- or 6-channel mode

- Static: Manually set dimming level and strobe rate

- Auto Show: Select one of four preprogrammed shows

- Master/Slave: Set the EPROFILE HP to function either as a master or slave when linking multiple units

- Dimmer Mode: Select the preferred dimming curve (1 = fast, 2 = medium, 3 = slow)

- LED Frequency: Select the preferred frequency (for achieving icker-free video playback)

- Fan Mode: Select either variable speed (Auto) or always on (High)

- Back Light: Set display to darken after 10, 20 or 30 seconds, or set to always on (On)

- Information: View operating hours, sofware version and unit ID

DMX FUNCTIONS

- 2-Channel Mode: Controls dimming from 0 ~ 100% and LED frequency selection

- 3-Channel Mode: Adds strobe function

- 6-Channel Mode: Controls dimming, strobe, auto program selection, program speed,
dimming curve selection and LED frequency selection

DMX PIN DIAGRAM

DMX - OUTPUT

XLR socket

DMX - INPUT

XLR plug

Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin4 : N/C
Pin5 : N/C

5

MAINTENANCE

MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• All screws used for installing the device and any of its parts should be tightly fastened and should not
be corroded.

deformation.

• The main cables must be in impeccable condition and should be replaced immediately even when a
small problem is detected.

• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or
other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the
main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe
the part dr y. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might
penetrate the unit and cause damage to it.

TROUBLESHOOTING

Problems Possible causes Checks and remedies

Fixture does not light up

• No mains supply

• Dimmer fader set to 0

• Faulty LED

• Faulty LED board

•

Check the power supply voltage

•

Increase the value of the dimmer channels

•

Replace the LED board

•

Replace the LED board

General low light intensity

• Dirty lens assembly

•

Misaligned lens assembly

•

• Install lens assembly properly

Fixture does not power up

•

No power

•

Loose or damaged power cord

• Faulty internal power supply

• Check for power on power outlet

•

Check power cord

• Replace internal power supply

Contact an authorized service center in case of technical problems or not reported in the table can not be
resolved by the procedure given in the table.

FUSE REPLACEMENT

1. Disconnect this product from the power outlet.

2. Using a screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with a good fuse of the same type and rat­ing (250V/T3.15A).

4. Screw the fuse holder cap back in place and reconnect power.

6

OVERVIEW

Barrel
rotation
knob

Mounting
bracket

Framing
shutter (x 4)

Gobo
holder
slot

Lens tube
(sold separately)

Focus
knob

Bracket
tightening
knob

PowerCon In & Out

DMX In & Out

Menu display

Menu
navigation
buttons

Accessory
holder
slot

Handle

7

DIMENSIONS





