Showtec WDP-1 User Manual

Single WDP-1 V1

Highlite Interna t ional B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: 50756

MANUAL

ENGLISH

Ordercode: 50756

Single WDP-1

Table of contents

Warning ............................................................................................................................................................................... 2

Safety Instructions ......................................................................................................................................................... 2

Operating Determinations .......................................................................................................................................... 3

Connection with the mains......................................................................................................................................... 3

Return Procedure .......................................................................................................................................................... 4

Claims .............................................................................................................................................................................. 4

Description of the device ................................................................................................................................................. 5

Overview ........................................................................................................................................................................ 5

HTP (Highest Takes Precedence) ............................................................................................................................ 6

Installation ........................................................................................................................................................................... 6

Connection Example ................................................................................................................................................... 6

Set Up and Operation ....................................................................................................................................................... 7

Linking.............................................................................................................................................................................. 7

Wireless Status LED Indicator .................................................................................................................................... 7

Unlinking .......................................................................................................................................................................... 7

Control Panel ................................................................................................................................................................. 8

Control Mode ................................................................................................................................................................ 8

DMX Addressing ............................................................................................................................................................ 8

Menu Overview ............................................................................................................................................................. 8

Main Menu Options ...................................................................................................................................................... 9

1. Remote Control/Manual Control ....................................................................................................................... 9

2. DMX Addressing (Fun1) ........................................................................................................................................ 9

3. Dimmer/Switch (Fun1) .......................................................................................................................................... 9

4. Dimmer Limit (Fun1) ............................................................................................................................................... 9

5. WDP Control (Fun1) ............................................................................................................................................... 9

6. Dimmer Preset (Fun2) ............................................................................................................................................ 9

7. Full On (Fun2) ........................................................................................................................................................10

DMX Channels .............................................................................................................................................................10

1 channel ..................................................................................................................................................................10

Maintenance ....................................................................................................................................................................10

Replacing the Fuse .....................................................................................................................................................10

Troubleshooting ...............................................................................................................................................................10

Product Specification .....................................................................................................................................................11

Notes ..................................................................................................................................................................................12

Ordercode: 50756

Single WDP-1

Your shipment includes:

• Showtec Single WDP-1 with a power cable (1 m)

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

• Remote dimming fader with a power cable (1,9 m)

• User manual

Safety Instructions

Every person involved with the installation, operation and maintenance of this device has to:

• be qualified

• follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

Ordercode: 50756

Single WDP-1

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

PHASE

BLUE

BLACK

SILVER

NEUTRAL

YELLOW/GREEN

GREEN

PROTECTIVE GROUND

IMPORTANT!

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.

• Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution!

• Never remove warning or informative labels from the unit.

• Never leave any cables lying around.

• Do not insert objects into air vents.

• Do not open the device and do not modify the device.

• Do not connect this device to a dimmer pack.

• Do not shake the device. Avoid brute force when installing or operating the device.

• Do not switch the device on and off in short intervals, as this would reduce the system’s life.

• Only use device indoors, avoid contact with water or other liquids.

• Only operate the device after having familiarized with its functions.

• Avoid flames and do not put close to flammable liquids or gases.

• Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power cord by the plug. Never pull out the plug by tugging the power cord.

• Make sure that the device is not exposed to extreme heat, moisture or dust.

• Make sure that the available voltage is not higher than stated on the rear panel.

• Make sure that the power cord is never crimped or damaged. Check the device and the power

cord from time to time.

• If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.

• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

• If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.

• For adult use only. The device must be installed out of the reach of children. Never leave the unit running unattended.

• For replacement use fuses of same type and rating only.

• Repairs, servicing and electric connection must be carried out by a qualified technician.

• WARRANTY: Till one year after date of purchase.

Operating Determinations

• This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects.

• The maximum ambient temperature t

= 35°C must never be exceeded.

• The relative humidity must not exceed 50 % with an ambient temperature of 35° C.

• If this device is operated in any other way, than the one described in this manual, the product may

suffer damages and the warranty becomes void.

• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Connection with the mains

Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.

Make sure that the device is always connected properly to the earth! Improper installation can cause serious damage to people and property!

Ordercode: 50756

Single WDP-1

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl Be prepared to provide the model number, serial number and a brief description of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper inside the box:

01) Your name

02) Your address

03) Your phone number

04) A brief description of the symptoms

and request an RMA prior to shipping the fixture.

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping. Transportation damage has to be reported to us within one day after receipt of the delivery. Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless otherwise agreed in writing. Complaints against us must be made known in writing or by fax within 10 working days after receipt of the invoice. After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting.

+ 11 hidden pages