SHOWTEC Truss Booster RDM 1-6 User Manual
Truss Booster RDM 1-6 V1
Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands
Ordercode: 50794
MANUAL
ENGLISH
1
Ordercode: 50794
Truss Booster RDM 1-6
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Rigging ............................................................................................................................................................................ 4
Connection with the mains......................................................................................................................................... 5
Return Procedure .......................................................................................................................................................... 6
Claims .............................................................................................................................................................................. 6
Description of the device ................................................................................................................................................. 7
Overview ........................................................................................................................................................................ 7
Front ................................................................................................................................................................................. 8
Back ................................................................................................................................................................................. 9
Installation ........................................................................................................................................................................... 9
Setup and Operation ........................................................................................................................................................ 9
Control Modes .............................................................................................................................................................10
Multiple Truss Boosters (DMX/RDM control) .........................................................................................................10
Fixture Linking ...............................................................................................................................................................11
Data Cabling ...............................................................................................................................................................11
Maintenance ....................................................................................................................................................................12
Replacing the Fuse .....................................................................................................................................................12
Troubleshooting ...............................................................................................................................................................12
No Light .........................................................................................................................................................................12
No Response to DMX..................................................................................................................................................12
Product Specifications ....................................................................................................................................................14
Dimensions ........................................................................................................................................................................14
2
Ordercode: 50794
Truss Booster RDM 1-6
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
● Showtec Truss Booster RDM 1-6
● Pro power cable (1,5 m)
● 1 x mounting bracket
● 2 x Velcro strap
● User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
● be qualified
● follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
3
Ordercode: 50794
Truss Booster RDM 1-6
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
● Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
● Never modify, bend, mechanically strain, put pressure on, pull or heat up the power cord.
● Never remove warning or informative labels from the unit.
● Never use anything to cover the ground contact.
● Never leave any cables lying around.
● Never strain the cable. There must always be sufficient cable going to the device. Otherwise, the
cable will be damaged, which can cause serious damage.
● Never use the device during thunderstorms, unplug the device immediately.
● Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach, as they are potential sources of danger.
● Do not open the device and do not modify the device.
● Do not connect this device to a dimmer pack.
● Do not shake the device. Avoid brute force when installing or operating the device.
● Do not switch the device on and off in short intervals, as this would reduce the system’s life.
● Do not touch the device’s housing bare-handed during its operation.
● Only use device indoors, avoid contact with water or other liquids.
● Only operate the device after having familiarized with its functions.
● Only install the device with the hanging bracket or the Velcro straps.
● Avoid flames and do not put close to flammable liquids or gases.
● Always keep case closed while operating.
● Always allow free air space of at least 50 cm around the unit for ventilation.
● Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power cord by the plug. Never pull out the plug by tugging the power cord.
● Make sure that the device is not exposed to extreme heat, moisture or dust.
● Make sure that the available voltage is not higher than stated on the rear panel.
● Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
● Make sure that the core diameter of extension cords and power cords is sufficient for the required
power consumption of the device.
● Make sure that no side forces can impact on the truss system.
● If the external cable is damaged, it has to be replaced by a qualified technician.
● If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
● If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
● If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
● For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.
● For replacement use fuses of same type and rating only.
● The user is responsible for correct positioning and operating of the Truss Booster.The manufacturer
will not accept liability for damages caused by the misuse or incorrect installation of this device.
● This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.
4
Ordercode: 50794
Truss Booster RDM 1-6
Operating Determinations
● This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
● The maximum ambient temperature ta = 40 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 40 °C.
● If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
● Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
● If the Truss Booster is lowered from the ceiling or high joists, professional trussing systems have to be
used.
● Use a clamp to mount the Truss Booster, with the mounting bracket, to the trussing system.
● The Truss Booster must never be fixed swinging freely in the room.
● The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
● When rigging, derigging or servicing the Truss Booster, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
Improper installation can cause serious injuries and/or damage of property!
Loading...