SHOWTEC Studiobeam MSR-575 User Manual

Studiobeam MSR-575

ORDERCODE 30708

Congratulations!

You have bought a great, innovative product from Showtec.
The Showtec Studiobeam brings excitement to any venue.

You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]

You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !

Thank you!

Showtec

Showtec Studiobeam™ Product Guide

Warning..…...................................................................................…………………………………………..

Safety-instructions………………………………………………………………………………………….….

Operating Determinations……………………………………………………………………………………..
Installing the Studiobeam with a Clamp/Hook………………………………………………………………
Rigging…………………………………………………………………………………………………………..

Description..…..............................................................................……….……………………………….…

Features……………………….………………………………………………………….………………….….

Installation...............................................................................…...……………………….…………….…..

Installing the Lamp ........................................................………………………………………..…………

Lens Identification......................................................……………………………………………………...

Installing a Lens......................................................………………………………………………………...

Removing a Lens......................................................…………………………………………………..…..

Color Frame Retaining Clip.............................……………………………………………………………...

Set Up and Operation.....................................................................……..……………………………….…

Maintenance...................................................................................………..………….…….………………

Cleaning the Rflector...................................................................…………………….…………………..

Changing the Lamp........................................................................…………………….…………………

Replacing the Fuse........................................................................…………………….…………………

2
2
4
4
5

6
6

7
7
7
8
8
9

9

10
10
10
10

Troubleshooting............................................................................………………….………………….…..

No Light............................................………………….……………………………………………………..

Product Specifications.................................................................……………….…….…………………..

11
11

12

1

WARNING

plug

CAUTION!

Keep this device away from rain and moisture!

Un

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

- be qualified

- follow the instructions of this manual

a dangerous electric shock when touching the wires!

Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.

mains lead before opening the housing!

BEFORE YOUR INITIAL START-UP!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

Please consider that damages caused by manual modifications to the device are not subject to warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.

• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the device and do not modify the device.

• Do not insert objects into air vents.

• Never use anything to cover the ground contact.

• Never look directly into the light source.

• Never leave any cables lying around.

• Never use the device during thunderstorms, unplug the device immediately.

• Do not connect this device to a dimmerpack.

• Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.

• Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

• Do not shake the device. Avoid brute force when installing or operating the device.

• Do not operate the device without a lens installed.

• Only use device indoor, avoid contact with water or other liquids.

• Only operate the fixture after having checked that the housing is firmly closed and all screws are

tightly fastened.

• Only operate the device after having familiarized with its functions.

• Avoid flames and do not put close to flammable liquids or gases.

• Always hang the device with the color frame retaining clip in the locked position.

• Always replace the lamp, when it is damaged or deformed due to the heat.

• Always keep case closed while operating.

• Always allow free air space of at least 50 cm around the unit for ventilation.

2

• Always disconnect power from the mains, when device is not used, before cleaning or when

(

replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the
power-cord.

• Make sure that the device is not exposed to extreme heat, moisture or dust.

• Make sure that the available voltage is not higher than stated on the rear panel.

• Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord

from time to time.

• Make sure that no side forces can impact on the truss system.

• Make sure that the core diameter of extension cords and power cords is sufficient for the required

power consumption of the device.

• The Studiobeam must be installed onto truss systems via the mounting bracket.

• The cable insert or the female part in the device must never be strained. There must always be

sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.

• If the external cable is damaged, it has to be replaced by a qualified technician.

• If the lens or glass is obviously damaged, it has to be replaced. So that its functions are not

impaired, due to cracks or deep scratches.

• If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.

• If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.

• For adult use only. Light effect must be installed out of the reach of children. Never leave the unit
running unattended.

• For replacement use lamps and fuses of same type and rating only.

• Allow time to cool down, before replacing lamp.

• The user is responsible for correct positioning and operating of the Studiobeam. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

• This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.

• To ensure the longest and most efficient use of the lamp always wait 15 minutes before re-applying
power after a shutdown. Failure to do so could result in premature aging of the lamp and failure to
the electronics that drive it.

• Replace the lamp if it becomes defective or worn out, or before usage exceeds the maximum service
life.

• During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.

• Repairs, servicing and electric connection must be carried out by a qualified technician.

• WARRANTY: Till one year after date of purchase.

Avoid looking directly into the light source.

CAUTION ! EYEDAMAGES !.

meant especially for epileptics) !

3